MAKE THE REQUIREMENT SPECIFIC
Work conditions to carry into selection.
Describe the material, bucket work and gripping movement before choosing a combined form or separate thumb. The excavator multi-purpose bucket and skid-steer 4-in-1 bucket are different carrier configurations. Identify the exact carrier, mounting, opening and any auxiliary circuit; a function count does not establish capacity or a handled-load rating.
| Tool choice | Information to provide | Applicable conditions |
|---|---|---|
| Hydraulic 3-in-1 Multi-purpose Buckets ↗ | Required functions; material; width/capacity; opening; auxiliary circuit; machine mounting. | Function names do not establish capacity, load rating or a complete model; confirm the ordered arrangement. |
| Skid Steer 4-in-1 Buckets ↗ | Exact loader model; mounting plate; width/capacity; material; hydraulic connection. | The photo does not approve a universal skid-steer interface or provide an orderable model and capacity. |
| Hydraulic Thumbs ↗ | Bucket/linkage geometry; pivot; stroke; material; clearance and cylinder circuit. | The bucket path, pivot, cylinder travel, interference and circuit need a matching drawing; no complete model is invented. |
Type-level values in the supplied brochure
These references belong to the illustrated type. They do not replace a complete model specification or a confirmed machine configuration.
| Type | Brochure field | Reference value | Source |
|---|---|---|---|
| Hydraulic 3-in-1 Multi-purpose Buckets ↗ | Brochure carrier reference | 2-30T | P06 · p.4 ↗ |
| Hydraulic Thumbs ↗ | Brochure carrier reference | 4-30T | P06 · p.4 ↗ |
Compare the relevant product configurations.
Buckets
Hydraulic 3-in-1 Multi-purpose Buckets
Combine bucket work and material gripping with the supplied hydraulic multi-purpose bucket form.
Configuration enquiry · model to confirmView configuration and details →Buckets
Skid Steer 4-in-1 Buckets
Load, dig, grade and grip suitable material with the supplied hydraulic 4-in-1 skid-steer bucket form.
Configuration enquiry · model to confirmView configuration and details →Hydraulic Thumbs
Hydraulic Thumbs
Use a separately matched hydraulic thumb and bucket to retain suitable material during handling.
Configuration enquiry · model to confirmView configuration and details →Source-listed models for further review.
Configuration information to request.
The supplied material identifies the product form but does not establish a complete model with its numeric specification. Review the type-specific geometry, machine, hydraulic and drawing requirements below.
Read the selection guidance.
BUYING GUIDE
Bucket selection: task, material and interface
Crushing, screening, clamshell handling, cleaning and digging are different tasks. Supplied image families also include tilt, rock and multi-purpose configurations.
Read the guide →BUYING GUIDE
Crushing vs screening buckets: separate the process
The supplied crushing-bucket page describes breaking feed material on site. The screening-bucket page describes separating material by a screen arrangement. Size reduction and separation are different process requirements.
Read the guide →BUYING GUIDE
Prepare a multi-attachment fleet compatibility record
Record exact model/year, machine weight, available interface drawings and hydraulic circuit information. Group by confirmed configuration rather than tonne class alone.
Read the guide →BUYING GUIDE
Hydraulic thumb and bucket geometry review
Provide the bucket, linkage and thumb connection geometry and the proposed handling task.
Read the guide →Original product information.
PDF · 4 PAGES
Product Type Reference Brochure · Selected Pages
View the original pages and retain the relevant version with your enquiry.
PDF · 48 PAGES
Excavator Attachment Catalogue
View the original pages and retain the relevant version with your enquiry.
Continue through the work.
Excavate to the required profile
Match the ground and excavation geometry to bucket width, edge/teeth and the machine connection. Rock-bearing material and finishing work should not share one generic bucket specification.
Explore the scenario →Construction & EarthworkClean and finish the surface
A toothless cleaning bucket shapes a different contact surface from a digging bucket. If the job needs angled positioning, compare a tilting bucket and a tilting coupler as separate configurations.
Explore the scenario →Construction & EarthworkLoosen, then compact
Loosening resistant material and compacting placed fill are separate operations. Specify the ripper geometry or compactor plate, access and machine/circuit data for the relevant stage.
Explore the scenario →Construction & EarthworkChange tools and define the positioning movement
Begin with the connected tool and both mounting interfaces. A fixed coupler changes the connection, a tilting configuration adds tilt, and the supplied R-series adds rotation. Compare each function and its own hydraulic requirements; rotation is not tilt and does not establish compatibility with every powered tool.
Explore the scenario →