Excavator attachment supply · Ningbo, China Search · FAQ · Support · Market / EnglishWhatsApp +86 15058273161
WE-ATTACH

WE-ATTACH / EXCAVATOR ATTACHMENTS

Construction & Earthwork

A bucket, a coupler and a compactor solve different parts of an earthwork job. Define the excavation profile, the movement needed at the tool and the backfill conditions before selecting the arrangement.

Explore the work stages

START WITH THE WORK

From excavation profile to backfill.

01

Excavate to the required profile

Match the ground and excavation geometry to bucket width, edge/teeth and the machine connection. Rock-bearing material and finishing work should not share one generic bucket specification.

Explore this work scenario
02

Clean and finish the surface

A toothless cleaning bucket shapes a different contact surface from a digging bucket. If the job needs angled positioning, compare a tilting bucket and a tilting coupler as separate configurations.

Explore this work scenario
03

Loosen, then compact

Loosening resistant material and compacting placed fill are separate operations. Specify the ripper geometry or compactor plate, access and machine/circuit data for the relevant stage.

Explore this work scenario
04

Change tools and define the positioning movement

Begin with the connected tool and both mounting interfaces. A fixed coupler changes the connection, a tilting configuration adds tilt, and the supplied R-series adds rotation. Compare each function and its own hydraulic requirements; rotation is not tilt and does not establish compatibility with every powered tool.

Explore this work scenario
05

Plan digging and gripping as defined functions

Describe the material, bucket work and gripping movement before choosing a combined form or separate thumb. The excavator multi-purpose bucket and skid-steer 4-in-1 bucket are different carrier configurations. Identify the exact carrier, mounting, opening and any auxiliary circuit; a function count does not establish capacity or a handled-load rating.

Explore this work scenario

The material and work stage

A bucket, a coupler and a compactor solve different parts of an earthwork job. Define the excavation profile, the movement needed at the tool and the backfill conditions before selecting the arrangement.

Information for the configuration review

Material and required result; machine/interface; bucket width/capacity definition; access/reach; auxiliary circuit.

Documents to keep with the proposal

Keep the complete model/suffix, machine and mounting information with the relevant drawing and operating requirements. The work stages above identify the product and document paths for this application.

Application scope

These are selection pathways drawn from the supplied product material. Confirm the exact configuration and site conditions; no customer project or measured site result is represented by the product photographs.

Start with the relevant attachment family

Model references and source specifications for this industry

Hydraulic Quick Couplers ↗

Model-specific source values · original fields and units retained
Complete modelSource specification snapshotDetails & download
WHC01 ↗
SUITABLE CARRIER,T
1-2
OIL FLOW RANGE,L/MIN
10-30
PIN DIAMETER(ØD),MM
Ø25-Ø30
Source P03 · p.6 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WHC02 ↗
SUITABLE CARRIER,T
2.5-4
OIL FLOW RANGE,L/MIN
10-30
PIN DIAMETER(ØD),MM
Ø30-Ø40
Source P03 · p.6 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WHC03 ↗
SUITABLE CARRIER,T
5-6
OIL FLOW RANGE,L/MIN
10-30
PIN DIAMETER(ØD),MM
Ø40-Ø50
Source P03 · p.6 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WHC04 ↗
SUITABLE CARRIER,T
7-10
OIL FLOW RANGE,L/MIN
10-30
PIN DIAMETER(ØD),MM
Ø50-Ø60
Source P03 · p.6 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WHC06 ↗
SUITABLE CARRIER,T
11-17
OIL FLOW RANGE,L/MIN
10-30
PIN DIAMETER(ØD),MM
Ø60-Ø70
Source P03 · p.6 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WHC08 ↗
SUITABLE CARRIER,T
18-25
OIL FLOW RANGE,L/MIN
10-30
PIN DIAMETER(ØD),MM
Ø80-Ø90
Source P03 · p.6 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WHC10 ↗
SUITABLE CARRIER,T
25-36
OIL FLOW RANGE,L/MIN
10-30
PIN DIAMETER(ØD),MM
Ø90-Ø100
Source P03 · p.6 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WHC14 ↗
SUITABLE CARRIER,T
36-45
OIL FLOW RANGE,L/MIN
10-30
PIN DIAMETER(ØD),MM
Ø100-Ø110
Source P03 · p.6 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WHC17 ↗
SUITABLE CARRIER,T
45-55
OIL FLOW RANGE,L/MIN
10-30
PIN DIAMETER(ØD),MM
Ø110-Ø130
Source P03 · p.6 ↗
All parameters and conditions ↗
Download reference · CSV ↗

Cast Quick Couplers ↗

Model-specific source values · original fields and units retained
Complete modelSource specification snapshotDetails & download
WCQ06 ↗
LENGTH,MM
930
L1,MM
375
ØD,MM
65
Source P03 · p.7 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WCQ08 ↗
LENGTH,MM
1052
L1,MM
470
ØD,MM
80
Source P03 · p.7 ↗
All parameters and conditions ↗
Download reference · CSV ↗

Double-lock D Couplers ↗

Model-specific source values · original fields and units retained
Complete modelSource specification snapshotDetails & download
WDQ02 ↗
SUITABLE CARRIER,T
1-2
REQUIRED FLOW,L/MIN
10-30
PIN DIAMETER(ØD),MM
25-30
Source P03 · p.8 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WDQ03 ↗
SUITABLE CARRIER,T
2.5-4
REQUIRED FLOW,L/MIN
10-30
PIN DIAMETER(ØD),MM
35-40
Source P03 · p.8 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WDQ04 ↗
SUITABLE CARRIER,T
5-6
REQUIRED FLOW,L/MIN
10-30
PIN DIAMETER(ØD),MM
45
Source P03 · p.8 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WDQ05 ↗
SUITABLE CARRIER,T
7-10
REQUIRED FLOW,L/MIN
10-30
PIN DIAMETER(ØD),MM
50-60
Source P03 · p.8 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WDQ06 ↗
SUITABLE CARRIER,T
11-17
REQUIRED FLOW,L/MIN
10-30
PIN DIAMETER(ØD),MM
60-70
Source P03 · p.8 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WDQ08 ↗
SUITABLE CARRIER,T
18-25
REQUIRED FLOW,L/MIN
10-30
PIN DIAMETER(ØD),MM
80-90
Source P03 · p.8 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WDQ09 ↗
SUITABLE CARRIER,T
25-36
REQUIRED FLOW,L/MIN
10-30
PIN DIAMETER(ØD),MM
90-100
Source P03 · p.8 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WDQ10 ↗
SUITABLE CARRIER,T
36-45
REQUIRED FLOW,L/MIN
10-30
PIN DIAMETER(ØD),MM
100-120
Source P03 · p.8 ↗
All parameters and conditions ↗
Download reference · CSV ↗

Double-lock S Couplers ↗

Model-specific source values · original fields and units retained
Complete modelSource specification snapshotDetails & download
WSQ30 ↗
SUITABLE CARRIER,T
0.8-2
REQUIRED FLOW,L/MIN
10-20
MAXIMUM OPENING(W-MAX),MM
144
Source P03 · p.9 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WSQ40 ↗
SUITABLE CARRIER,T
2-6
REQUIRED FLOW,L/MIN
10-20
MAXIMUM OPENING(W-MAX),MM
156
Source P03 · p.9 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WSQ45 ↗
SUITABLE CARRIER,T
6-11
REQUIRED FLOW,L/MIN
10-20
MAXIMUM OPENING(W-MAX),MM
226
Source P03 · p.9 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WSQ50 ↗
SUITABLE CARRIER,T
6-11
REQUIRED FLOW,L/MIN
10-20
MAXIMUM OPENING(W-MAX),MM
206
Source P03 · p.9 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WSQ60 ↗
SUITABLE CARRIER,T
11-18
REQUIRED FLOW,L/MIN
10-20
MAXIMUM OPENING(W-MAX),MM
272
Source P03 · p.9 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WSQ65 ↗
SUITABLE CARRIER,T
18-22
REQUIRED FLOW,L/MIN
10-20
MAXIMUM OPENING(W-MAX),MM
272
Source P03 · p.9 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WSQ70 ↗
SUITABLE CARRIER,T
22-30
REQUIRED FLOW,L/MIN
10-20
MAXIMUM OPENING(W-MAX),MM
364
Source P03 · p.9 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WSQ70/55 ↗
SUITABLE CARRIER,T
22-32
REQUIRED FLOW,L/MIN
10-20
MAXIMUM OPENING(W-MAX),MM
364
Source P03 · p.9 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WSQ80 ↗
SUITABLE CARRIER,T
30-40
REQUIRED FLOW,L/MIN
10-20
MAXIMUM OPENING(W-MAX),MM
470
Source P03 · p.9 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WSQ90 ↗
SUITABLE CARRIER,T
40-70
REQUIRED FLOW,L/MIN
10-20
MAXIMUM OPENING(W-MAX),MM
610
Source P03 · p.9 ↗
All parameters and conditions ↗
Download reference · CSV ↗

Tilting D Couplers ↗

Model-specific source values · original fields and units retained
Complete modelSource specification snapshotDetails & download
WTD02 ↗
SUITABLE CARRIER,T
1-2.5
CYLINDER FLOW RATE,L/MIN
10-30
SWING CYLINDER WORKING FLOW,L/MIN
2-4
Source P03 · p.10 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WTD03 ↗
SUITABLE CARRIER,T
3-4
CYLINDER FLOW RATE,L/MIN
10-30
SWING CYLINDER WORKING FLOW,L/MIN
5-16
Source P03 · p.10 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WTD04 ↗
SUITABLE CARRIER,T
5-6.5
CYLINDER FLOW RATE,L/MIN
10-30
SWING CYLINDER WORKING FLOW,L/MIN
5-16
Source P03 · p.10 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WTD05 ↗
SUITABLE CARRIER,T
7-10
CYLINDER FLOW RATE,L/MIN
10-30
SWING CYLINDER WORKING FLOW,L/MIN
15-44
Source P03 · p.10 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WTD06 ↗
SUITABLE CARRIER,T
11-17
CYLINDER FLOW RATE,L/MIN
10-30
SWING CYLINDER WORKING FLOW,L/MIN
19-58
Source P03 · p.10 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WTD08 ↗
SUITABLE CARRIER,T
18-26
CYLINDER FLOW RATE,L/MIN
10-30
SWING CYLINDER WORKING FLOW,L/MIN
35-105
Source P03 · p.10 ↗
All parameters and conditions ↗
Download reference · CSV ↗

Tilting S Couplers ↗

Model-specific source values · original fields and units retained
Complete modelSource specification snapshotDetails & download
WTS40 ↗
SUITABLE CARRIER,T
2-6
CYLINDER FLOW RATE,L/MIN
10-20
SWING CYLINDER WORKING FLOW,L/MIN
5-16
Source P03 · p.11 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WTS45 ↗
SUITABLE CARRIER,T
6-11
CYLINDER FLOW RATE,L/MIN
10-20
SWING CYLINDER WORKING FLOW,L/MIN
15-44
Source P03 · p.11 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WTS60 ↗
SUITABLE CARRIER,T
11-20
CYLINDER FLOW RATE,L/MIN
10-20
SWING CYLINDER WORKING FLOW,L/MIN
19-58
Source P03 · p.11 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WTS70 ↗
SUITABLE CARRIER,T
22-35
CYLINDER FLOW RATE,L/MIN
10-20
SWING CYLINDER WORKING FLOW,L/MIN
35-105
Source P03 · p.11 ↗
All parameters and conditions ↗
Download reference · CSV ↗

Rotating Couplers ↗

Model-specific source values · original fields and units retained
Complete modelSource specification snapshotDetails & download
WRQ02 ↗
SUITABLE CARRIER,T
2.5-4
OPERATING FLOW(MOTOR),L/MIN
40-50
OPERATING FLOW(CYLINDER),L/MIN
10-30
Source P03 · p.12 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WRQ4 ↗
SUITABLE CARRIER,T
5-7
OPERATING FLOW(MOTOR),L/MIN
60-70
OPERATING FLOW(CYLINDER),L/MIN
10-30
Source P03 · p.12 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WRQ06 ↗
SUITABLE CARRIER,T
11-15
OPERATING FLOW(MOTOR),L/MIN
60-70
OPERATING FLOW(CYLINDER),L/MIN
10-30
Source P03 · p.12 ↗
All parameters and conditions ↗
Download reference · CSV ↗

Upgraded Vibratory Compactors ↗

Model-specific source values · original fields and units retained
Complete modelSource specification snapshotDetails & download
WEC04 ↗
SUITABLE EXCAVATOR,T
1-5
OIL FLOW RANGE,L/MIN
50-70
WORKING PRESSURE,BAR
80-120
Source P03 · p.33 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WEC06 ↗
SUITABLE EXCAVATOR,T
6-10
OIL FLOW RANGE,L/MIN
60-80
WORKING PRESSURE,BAR
90-130
Source P03 · p.33 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WEC15 ↗
SUITABLE EXCAVATOR,T
11-16
OIL FLOW RANGE,L/MIN
80-120
WORKING PRESSURE,BAR
100-140
Source P03 · p.33 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WEC20 ↗
SUITABLE EXCAVATOR,T
17-23
OIL FLOW RANGE,L/MIN
100-170
WORKING PRESSURE,BAR
150-180
Source P03 · p.33 ↗
All parameters and conditions ↗
Download reference · CSV ↗

Rippers ↗

Model-specific source values · original fields and units retained
Complete modelSource specification snapshotDetails & download
WR02 ↗
SUITABLE EXCAVATOR, T
2-4
OPENING WIDTH, MM
110-160
SHAFT DIAMETER, MM
35-40
Source P03 · p.36 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WR04 ↗
SUITABLE EXCAVATOR, T
5-8
OPENING WIDTH, MM
150-230
SHAFT DIAMETER, MM
40-55
Source P03 · p.36 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WR06 ↗
SUITABLE EXCAVATOR, T
9-16
OPENING WIDTH, MM
220-300
SHAFT DIAMETER, MM
60-70
Source P03 · p.36 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WR08 ↗
SUITABLE EXCAVATOR, T
17-23
OPENING WIDTH, MM
300-360
SHAFT DIAMETER, MM
80-90
Source P03 · p.36 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WR10 ↗
SUITABLE EXCAVATOR, T
24-30
OPENING WIDTH, MM
360-410
SHAFT DIAMETER, MM
90-100
Source P03 · p.36 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WR12 ↗
SUITABLE EXCAVATOR, T
31-35
OPENING WIDTH, MM
410-480
SHAFT DIAMETER, MM
100-110
Source P03 · p.36 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WR14 ↗
SUITABLE EXCAVATOR, T
36-45
OPENING WIDTH, MM
480-550
SHAFT DIAMETER, MM
110-120
Source P03 · p.36 ↗
All parameters and conditions ↗
Download reference · CSV ↗

Tilt Buckets ↗

Model-specific source values · original fields and units retained
Complete modelSource specification snapshotDetails & download
WTB01 ↗
SUITABLE EXCAVATOR,T
2-4
TILT OIL FLOW, L/MIN
13-18
MAX. OPERATINGPRESSURE, BAR
230
Source P03 · p.39 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WTB02 ↗
SUITABLE EXCAVATOR,T
5-6
TILT OIL FLOW, L/MIN
15-20
MAX. OPERATINGPRESSURE, BAR
230
Source P03 · p.39 ↗
All parameters and conditions ↗
Download reference · CSV ↗

Selection and purchase guidance

Quick coupler types and configuration review · supplied family image; exact model not identified

Quick coupler types and configuration review

The supplied WHC, WCQ, WDQ, WSQ, WTD, WTS and WRQ pages distinguish hydraulic, cast, double-lock, tilting and rotating types. Rotation and tilt are different functions; a rotating quick coupler is not automatically a tiltrotator.

Explore ↗
How to prepare quick coupler measurements · supplied family image; exact model not identified

How to prepare quick coupler measurements

The pre-order form identifies front and rear pin diameters A1/A2, centre distance B and widths C1/C2. Record what each width measures, include units and attach labelled photographs or a drawing.

Explore ↗
Bucket selection: task, material and interface · supplied family image; exact model not identified

Bucket selection: task, material and interface

Crushing, screening, clamshell handling, cleaning and digging are different tasks. Supplied image families also include tilt, rock and multi-purpose configurations.

Explore ↗
Plate compactor project information · supplied family image; exact model not identified

Plate compactor project information

Record compaction location, material, working area, access and the required project outcome. Catalogue compaction claims are not treated as verified site results.

Explore ↗
Ripper geometry and project selection · supplied family image; exact model not identified

Ripper geometry and project selection

Provide the material, proposed work, machine reach and site constraints. The WR references are retained as catalogue models.

Explore ↗
Hydraulic thumb and bucket geometry review · supplied family image; exact model not identified

Hydraulic thumb and bucket geometry review

Provide the bucket, linkage and thumb connection geometry and the proposed handling task.

Explore ↗
What to include in an attachment quotation request · supplied family image; exact model not identified

What to include in an attachment quotation request

The supplied order process covers customer identity, machine brand/model/year, installation dimensions/oil ports, working conditions, function/specification and a completeness check.

Explore ↗
Machine and attachment compatibility information · supplied family image; exact model not identified

Machine and attachment compatibility information

Provide exact brand, model and year, working weight and available machine documents. Add serial information when needed for configuration review.

Explore ↗
Read the quick coupler warranty by component · supplied family image; exact model not identified

Read the quick coupler warranty by component

The supplied quick-coupler matrix distinguishes body, hydraulic lock, cylinder, valve, pins, hoses and switch. Standard and rotating arrangements have different conditions.

Explore ↗
Rotating vs tilting couplers: choose the movement you need · supplied family image; exact model not identified

Rotating vs tilting couplers: choose the movement you need

A rotary coupler changes the tool orientation through the 360-degree rotation described in the R-series source. A tilting coupler changes the tool angle within its model-specific tilt range. These are different motions; neither label alone establishes a tiltrotator.

Explore ↗
Prepare a multi-attachment fleet compatibility record · supplied family image; exact model not identified

Prepare a multi-attachment fleet compatibility record

Record exact model/year, machine weight, available interface drawings and hydraulic circuit information. Group by confirmed configuration rather than tonne class alone.

Explore ↗

Source and document traceability

Catalogue transcription for preliminary review. Confirm the applicable configuration and current approved revision before order.

CONTINUE YOUR REVIEW

Related information for your next decision

Discuss your machine, application and configuration →

What do you need to do?

Start with part of a model or describe the job. Suggested results are for selection review.