FROM AN IDEA TO A REQUIREMENT
What to specify for this attachment
Use these decisions to turn the work requirement into a model and configuration enquiry.
| Decision | Why it matters | Information to provide |
|---|---|---|
| Required movement | Changing a tool, tilting it and rotating it are separate functions. | The intended tool and movement, with the required angle/clearance. |
| Upper and lower interfaces | A model name or machine class does not define the complete connection. | Machine identity, pin diameter, centres, inside width and existing tool interface. |
| Hydraulic connections | Locking, rotation or tilt may have separate requirements from the connected tool. | Available circuits, flow, pressure, return and required hose arrangement. |
| Installation information | The final arrangement must retain the applicable locking and operating information. | Current mounting drawing, full model/suffix and the intended attachment. |
Structure and functions in the supplied material
The WSQ series is listed as an S-type double-lock coupler. Its model table separates pin diameter, pin-centre distance, maximum opening, attachment weight and operating pressure/flow. Those dimensions describe the connection that must be checked against the machine and each intended tool.
Models and parameter comparison
| Parameter | WSQ30 ↗ | WSQ40 ↗ | WSQ45 ↗ | WSQ50 ↗ | WSQ60 ↗ | WSQ65 ↗ | WSQ70 ↗ | WSQ70/55 ↗ | WSQ80 ↗ | WSQ90 ↗ |
|---|---|---|---|---|---|---|---|---|---|---|
| PIN DIAMETER(ØD),MM | 20-30 | 30-40 | 40-50 | 50-60 | 60-70 | 70-80 | 80-90 | 80-90 | 90-110 | 110-120 |
| PIN CENTER DISTANCE(C-C),MM | 80-180 | 85-180 | 170-245 | 245-300 | 350-410 | 400-470 | 400-510 | 400-510 | 500-560 | 550-630 |
| MAXIMUM OPENING(W-MAX),MM | 144 | 156 | 226 | 206 | 272 | 272 | 364 | 364 | 470 | 610 |
| WORKING PRESSURE,BAR | 25-250 | 25-250 | 25-250 | 25-250 | 25-250 | 25-250 | 25-250 | 25-250 | 25-250 | 25-250 |
| REQUIRED FLOW,L/MIN | 10-20 | 10-20 | 10-20 | 10-20 | 10-20 | 10-20 | 10-20 | 10-20 | 10-20 | 10-20 |
| WEIGHT,KG | 35-45 | 60-80 | 95-110 | 120-130 | 180-210 | 230-260 | 380-400 | 390-410 | 590-610 | 950-1050 |
| SUITABLE CARRIER,T | 0.8-2 | 2-6 | 6-11 | 6-11 | 11-18 | 18-22 | 22-30 | 22-32 | 30-40 | 40-70 |
Tasks, applications and buyer value
For a fleet already using an S-type tool connection, the WSQ range provides a separate route to compare the connection geometry before selecting a model. Start with the existing tools and machine so the quotation retains the correct interface.
Selection inputs and applicable conditions
Pin diameter and centres; maximum opening; interface standard and revision; locking method; required circuit.
The source phrase “OS standards” has not been converted into a named certification or assumed Open-S compatibility. Request the exact standard/interface definition.
Plan the work around the attachment
Start with the tool connection
Record pin diameters, centres, inside width and the intended tool interface. Identify the existing standard and its revision instead of relying on a similar name.
Choose the movement your job needs
A fixed coupler changes the tool connection; a tilting coupler adds tilt; a rotary coupler adds rotation. Compare those functions separately against the task and available clearance.
Confirm the installed configuration
Keep the locking method, hydraulic connections, installation drawing and applicable operating instructions with the proposed model. Separate the connected tool circuit from coupler actuation.
Available information and source documents
The supplied family material supports this type entry. Complete order configuration, current drawing and applicable operation documents remain part of the model review.
Selection and purchase guidance
Where this tool fits in the work.
Questions specific to this type
What should I compare before choosing Double-lock S Couplers?
Pin diameter and centres; maximum opening; interface standard and revision; locking method; required circuit.
Which limits remain important for the purchase?
The source phrase “OS standards” has not been converted into a named certification or assumed Open-S compatibility. Request the exact standard/interface definition.
