Excavator attachment supply · Ningbo, China Search · FAQ · Support · Market / EnglishWhatsApp +86 15058273161
WE-ATTACH

Demolition & Recycling / WORK SCENARIO

Sort and transfer the material

Describe the mixed material, size, shape and expected handled load. Select jaw/tine form and rotation needs separately from the machine lifting envelope.

MAKE THE REQUIREMENT SPECIFIC

Work conditions to carry into selection.

Describe the mixed material, size, shape and expected handled load. Select jaw/tine form and rotation needs separately from the machine lifting envelope.

Product-specific inputs for this work stage
Tool choiceInformation to provideApplicable conditions
Selector & Demolition Grabs ↗Material mix; opening; blade task; rotation/cylinder circuits; machine reach.Material grades and comparative durability/strength claims are not assigned to an invented model.
Scrap Grapples ↗Scrap shape/density; opening/closure; source pressure unit; rotation/cylinder circuits; reach.Keep the source pressure units as printed; do not assume they are bar. No lifting rating follows from attachment weight or opening.
Orange Peel Grapples ↗Material/density; tine design; open/closed configuration; capacity definition; cylinder/rotation circuits.Capacity definitions, material density and machine lift/stability need confirmation. Material or reliability claims need model-specific records.

Type-level values in the supplied brochure

These references belong to the illustrated type. They do not replace a complete model specification or a confirmed machine configuration.

Original brochure notation retained · type-level reference
TypeBrochure fieldReference valueSource
Selector & Demolition Grabs ↗Brochure carrier reference2.5-35TP06 · p.8 ↗

Compare the relevant product configurations.

Source-listed models for further review.

Scrap Grapples ↗

Model-specific source values · original fields and units retained
Complete modelSource specification snapshotDetails & download
WGWS08 ↗
SUITABLE EXCAVATOR,T
5-10
OPERATION FLOW(GRAB),L/MIN
90-110
MOTOR OIL FLOW,L/MIN
30-50
Source P03 · p.27 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WGWS15 ↗
SUITABLE EXCAVATOR,T
11-16
OPERATION FLOW(GRAB),L/MIN
90-110
MOTOR OIL FLOW,L/MIN
30-50
Source P03 · p.27 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WGWS20 ↗
SUITABLE EXCAVATOR,T
17-40
OPERATION FLOW(GRAB),L/MIN
120-200
MOTOR OIL FLOW,L/MIN
40-60
Source P03 · p.27 ↗
All parameters and conditions ↗
Download reference · CSV ↗

Orange Peel Grapples ↗

Model-specific source values · original fields and units retained
Complete modelSource specification snapshotDetails & download
WOG15 ↗
SUITABLE EXCAVATOR, T
12-16
CYLINDER OIL FLOW,L/MIN
80-120
MOTOR OIL FLOW,L/MIN
30-50
Source P03 · p.29 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WOG15H ↗
SUITABLE EXCAVATOR, T
12-16
CYLINDER OIL FLOW,L/MIN
80-120
MOTOR OIL FLOW,L/MIN
30-50
Source P03 · p.29 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WOG20 ↗
SUITABLE EXCAVATOR, T
17-24
CYLINDER OIL FLOW,L/MIN
100-140
MOTOR OIL FLOW,L/MIN
30-50
Source P03 · p.29 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WOG20H ↗
SUITABLE EXCAVATOR, T
17-24
CYLINDER OIL FLOW,L/MIN
100-140
MOTOR OIL FLOW,L/MIN
30-50
Source P03 · p.29 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WOG30 ↗
SUITABLE EXCAVATOR, T
25-35
CYLINDER OIL FLOW,L/MIN
130-180
MOTOR OIL FLOW,L/MIN
30-50
Source P03 · p.29 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WOG30H ↗
SUITABLE EXCAVATOR, T
25-35
CYLINDER OIL FLOW,L/MIN
130-180
MOTOR OIL FLOW,L/MIN
30-50
Source P03 · p.29 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WOG15P ↗
SUITABLE EXCAVATOR, T
12-16
CYLINDER OIL FLOW,L/MIN
100-140
MOTOR OIL FLOW,L/MIN
30-50
Source P03 · p.29 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WOG15PH ↗
SUITABLE EXCAVATOR, T
12-16
CYLINDER OIL FLOW,L/MIN
100-140
MOTOR OIL FLOW,L/MIN
30-50
Source P03 · p.29 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WOG20P ↗
SUITABLE EXCAVATOR, T
17-24
CYLINDER OIL FLOW,L/MIN
130-180
MOTOR OIL FLOW,L/MIN
30-50
Source P03 · p.29 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WOG20PH ↗
SUITABLE EXCAVATOR, T
17-24
CYLINDER OIL FLOW,L/MIN
130-180
MOTOR OIL FLOW,L/MIN
30-50
Source P03 · p.29 ↗
All parameters and conditions ↗
Download reference · CSV ↗

Read the selection guidance.

Original product information.

PDF · 4 PAGES

Product Type Reference Brochure · Selected Pages

View the original pages and retain the relevant version with your enquiry.

PDF · 48 PAGES

Excavator Attachment Catalogue

View the original pages and retain the relevant version with your enquiry.

Continue through the work.

Demolition & Recycling

Separate structural breaking from rubble processing

State whether the material is still part of a structure or already on the ground. Include section size, reinforcement, access and desired result before comparing a breaker, crusher or pulverizer. Compare the supplied crusher and pulverizer forms separately; a rotation or magnet arrangement does not establish a different concrete-processing or lifting rating without the applicable model data.

Explore the scenario →
Demolition & Recycling

Specify the steel-cutting step

Give the material section, thickness and required mounting position. Jaw opening and a generic shear name do not establish the cutting capability for your steel.

Explore the scenario →
Demolition & Recycling

Define size reduction or separation

Crushing reduces material size; screening separates a specified fraction. State feed conditions, moisture and intended output so the process can be discussed clearly.

Explore the scenario →
Demolition & Recycling

Separate the dismantling tool from the holding frame

For a vehicle-dismantling proposal, describe the material, access and required work sequence. The dismantling shear is a cutting configuration; the pressing frame is a separate holding arrangement. Keep their mounting, carrier and hydraulic information distinct and request the relevant drawings for the proposed setup.

Explore the scenario →
Demolition & Recycling

Identify the breaker and its lubrication requirements

Keep the full breaker model, lubrication points and operating information with the service requirement. An automatic grease device is a support component, not an alternative breaking tool. Confirm the actual connection, lubricant requirements and service instructions for the proposed breaker configuration.

Explore the scenario →

CONTINUE YOUR REVIEW

Related information for your next decision

Discuss your machine, application and configuration →

What do you need to do?

Start with part of a model or describe the job. Suggested results are for selection review.