FROM AN IDEA TO A REQUIREMENT
What to specify for this attachment
Use these decisions to turn the work requirement into a model and configuration enquiry.
| Decision | Why it matters | Information to provide |
|---|---|---|
| Material and jaw form | Timber, stone, scrap and mixed material place different demands on contact and retention. | Material shape, dimensions and handling method. |
| Opening and handled load | Opening geometry does not establish a rated handled load. | Actual load, attachment mass and the machine working envelope. |
| Placement movement | Pickup, transfer and stacking space determine the positioning requirement. | Required rotation, reach, transfer height and placement conditions. |
| Connection and circuit | Mounting and actuation details stay specific to the proposed configuration. | Machine/interface, hydraulic circuits and applicable product documents. |
Structure and functions in the supplied material
The supplied scrap-grapple descriptions identify an enclosed jaw arrangement for bulk/irregular material; the table supplies opening, weight, hydraulic values and dimensions.
Models and parameter comparison
| Parameter | WGWS08 ↗ | WGWS15 ↗ | WGWS20 ↗ |
|---|---|---|---|
| MAX OPENING WIDTH,MM | 1675 | 1850 | 2300 |
| WEIGHT,KG | 580 | 1000 | 1820 |
| WORKING PRESSURE,KG/CM2 | 240 | 274 | 274 |
| OPERATION FLOW(GRAB),L/MIN | 90-110 | 90-110 | 120-200 |
| OPERATION PRESSURE(ROTATING),KG/CM2 | 140 | 140 | 140 |
| MOTOR OIL FLOW,L/MIN | 30-50 | 30-50 | 40-60 |
| SUITABLE EXCAVATOR,T | 5-10 | 11-16 | 17-40 |
| A | 1506 | 1950 | 2400 |
| B | 1675 | 1850 | 2300 |
| C | 550 | 400 | 500 |
| D | 310 | 700 | 875 |
Tasks, applications and buyer value
Define whether the load is loose, bulky or irregular so jaw closure and the handling envelope can be reviewed against your process.
Selection inputs and applicable conditions
Scrap shape/density; opening/closure; source pressure unit; rotation/cylinder circuits; reach.
Keep the source pressure units as printed; do not assume they are bar. No lifting rating follows from attachment weight or opening.
Plan the work around the attachment
Describe the material
Provide material type, size, shape and expected load. Timber, stone, loose scrap and demolition waste place different demands on the jaws.
Compare the handling envelope
Check opening, attachment mass, mounting and any rotation requirements against pickup, transfer and placement space. An opening dimension is not a rated lifting capacity.
Prepare the support information
Include carrier details, circuit data and photographs of the working task. Ask for the correct wear-part and maintenance information for the proposed configuration.
Available information and source documents
The supplied family material supports this type entry. Complete order configuration, current drawing and applicable operation documents remain part of the model review.
Selection and purchase guidance
Where this tool fits in the work.
Questions specific to this type
What should I compare before choosing Scrap Grapples?
Scrap shape/density; opening/closure; source pressure unit; rotation/cylinder circuits; reach.
Which limits remain important for the purchase?
Keep the source pressure units as printed; do not assume they are bar. No lifting rating follows from attachment weight or opening.
