FROM AN IDEA TO A REQUIREMENT
What to specify for this attachment
Use these decisions to turn the work requirement into a model and configuration enquiry.
| Decision | Why it matters | Information to provide |
|---|---|---|
| Material and jaw form | Timber, stone, scrap and mixed material place different demands on contact and retention. | Material shape, dimensions and handling method. |
| Opening and handled load | Opening geometry does not establish a rated handled load. | Actual load, attachment mass and the machine working envelope. |
| Placement movement | Pickup, transfer and stacking space determine the positioning requirement. | Required rotation, reach, transfer height and placement conditions. |
| Connection and circuit | Mounting and actuation details stay specific to the proposed configuration. | Machine/interface, hydraulic circuits and applicable product documents. |
View the supplied catalogue drawing and original technical page
Supplier-provided catalogue reference · P03 physical page 27. Check the exact model header, configuration and source version. This excerpt is not a substitute for the current approved installation drawing or a model-specific test report.

Catalogue specifications and source
| Field | Catalogue reference | Source physical page |
|---|---|---|
| Model | WGWS20 | P03 · p.27 ↗ |
| MAX OPENING WIDTH,MM | 2300 | P03 · p.27 ↗ |
| WEIGHT,KG | 1820 | P03 · p.27 ↗ |
| WORKING PRESSURE,KG/CM2 | 274 | P03 · p.27 ↗ |
| OPERATION FLOW(GRAB),L/MIN | 120-200 | P03 · p.27 ↗ |
| OPERATION PRESSURE(ROTATING),KG/CM2 | 140 | P03 · p.27 ↗ |
| MOTOR OIL FLOW,L/MIN | 40-60 | P03 · p.27 ↗ |
| SUITABLE EXCAVATOR,T | 17-40 | P03 · p.27 ↗ |
| A | 2400 | P03 · p.27 ↗ |
| B | 2300 | P03 · p.27 ↗ |
| C | 500 | P03 · p.27 ↗ |
| D | 875 | P03 · p.27 ↗ |
Drawing letters such as A/B refer to the original drawing keys; verify dimensions and units with the current model drawing.
Purpose and task
WGWS20 is the scrap grapple reference for irregular scrap handling. Pick and transfer irregular scrap with the WGWS grapple range.
How this helps your buying decision
Describe scrap shape, density and temperature, desired closure and working reach. Check the complete handling arrangement with the carrier. Compare WGWS20 with WGWS15 as separate source-listed configurations. For MOTOR OIL FLOW,L/MIN, the listed values are 40-60 (WGWS20) and 30-50 (WGWS15). For MAX OPENING WIDTH,MM, the listed values are 2300 (WGWS20) and 1850 (WGWS15). Keep units, mounting position, circuit labels and document conditions with each value. Similar model numbers or overlapping carrier references do not prove fitment, interchangeability or a better result for your task.
Model and configuration
The model-specific source row states: MAX OPENING WIDTH,MM: 2300; WEIGHT,KG: 1820; WORKING PRESSURE,KG/CM2: 274; OPERATION FLOW(GRAB),L/MIN: 120-200; OPERATION PRESSURE(ROTATING),KG/CM2: 140; MOTOR OIL FLOW,L/MIN: 40-60; SUITABLE EXCAVATOR,T: 17-40; A: 2400; B: 2300; C: 500; D: 875. Retain the printed units, dimension keys and applicable circuit or mounting labels; unknown drawing units require confirmation rather than conversion.
Machine and interface review
Describe scrap shape, density and temperature, desired closure and working reach. Check the complete handling arrangement with the carrier. Check mounting pins, centres, inside width, overall envelope and clearance through the intended movement against the actual assembly drawing. Catalogue carrier references are preliminary selection information, not machine-specific approval.
Installation, control and operating conditions
The source lists WORKING PRESSURE,KG/CM2: 274; OPERATION PRESSURE(ROTATING),KG/CM2: 140; MOTOR OIL FLOW,L/MIN: 40-60. Check the actual machine flow/pressure at the intended settings, control/valve arrangement, hose/coupling dimensions, return/back-pressure and any case-drain requirement against the current hydraulic drawing. Separate catalogue ranges or maxima do not establish one approved simultaneous running point. Pressure is printed in KG/CM2 for this table, not bar. Keep grab and rotation circuits separate. No maximum material temperature is established by the extended-jaw illustration.
Structure and differences
The supplied scrap-grapple descriptions identify an enclosed jaw arrangement for bulk/irregular material; the table supplies opening, weight, hydraulic values and dimensions. Pressure is printed in KG/CM2 for this table, not bar. Keep grab and rotation circuits separate. No maximum material temperature is established by the extended-jaw illustration.
Application boundaries
Keep the source pressure units as printed; do not assume they are bar. No lifting rating follows from attachment weight or opening.
Manufacturing and quality responsibility
WE-ATTACH supports attachment selection, configuration requirements and coordinated supply through core manufacturing partners, with a warehouse and hillside testing site. Keep the actual manufacturer, ordered model and applicable scope with inspection, material or compliance records. A partner facility certificate or catalogue image is not model-specific product approval.
Documents, parts and operation
Use P03 physical PDF page 27 and the model-reference CSV linked on this page. Each exported parameter retains its source ID and physical page. Catalogue sketches, source images and selection tables are reference information; request the current mounting/connection drawing, operating and maintenance instructions and model-specific evidence for the actual ordered configuration.
Options and scope of supply
Identify the jaw form, pins, rotation equipment and any material/temperature-specific requirements. Have the quotation identify the attachment, mounting, controls/connections, included accessories and required parts individually. A pictured option, support frame or related tool is not automatically included.
Information to send with a WGWS20 enquiry
For WGWS20, send machine make/model and operating weight; mounting/linkage dimensions; available circuit and return information where applicable; material, work stage, access/reach and desired result; Scrap shape/density; opening/closure; source pressure unit; rotation/cylinder circuits; reach. Include quantity, destination and any drawings/photos. State units and identify unknown values rather than substituting a similar machine or model.
Before confirming the order
Agree the complete model and suffix, actual machine, interfaces, operating conditions and scope of supply. Keep unresolved source descriptions and accepted drawing/document revisions with the quotation. Confirm inspection/document requirements, price, delivery, warranty and service scope for the actual order; no unverified term or performance commitment is added here.
Source and document traceability
Catalogue transcription for preliminary review. Confirm the applicable configuration and current approved revision before order.
- Excavator Attachment Catalogue ↗ · PDF physical page 27
Applications and working conditions
Selection and purchase guides
Questions before selection
What task does WGWS20 address?
WGWS20 is the scrap grapple reference for irregular scrap handling. Pick and transfer irregular scrap with the WGWS grapple range.
Which information should accompany a WGWS20 enquiry?
For WGWS20, send machine make/model and operating weight; mounting/linkage dimensions; available circuit and return information where applicable; material, work stage, access/reach and desired result; Scrap shape/density; opening/closure; source pressure unit; rotation/cylinder circuits; reach. Include quantity, destination and any drawings/photos. State units and identify unknown values rather than substituting a similar machine or model.
What must be checked before confirming this configuration?
Keep the source pressure units as printed; do not assume they are bar. No lifting rating follows from attachment weight or opening.
How should I compare WGWS20 with another configuration?
Compare WGWS20 with WGWS15 as separate source-listed configurations. For MOTOR OIL FLOW,L/MIN, the listed values are 40-60 (WGWS20) and 30-50 (WGWS15). For MAX OPENING WIDTH,MM, the listed values are 2300 (WGWS20) and 1850 (WGWS15). Keep units, mounting position, circuit labels and document conditions with each value. Similar model numbers or overlapping carrier references do not prove fitment, interchangeability or a better result for your task. Pressure is printed in KG/CM2 for this table, not bar. Keep grab and rotation circuits separate. No maximum material temperature is established by the extended-jaw illustration.
What installation and operating information is needed for WGWS20?
Describe scrap shape, density and temperature, desired closure and working reach. Check the complete handling arrangement with the carrier. The source lists WORKING PRESSURE,KG/CM2: 274; OPERATION PRESSURE(ROTATING),KG/CM2: 140; MOTOR OIL FLOW,L/MIN: 40-60. Check the actual machine flow/pressure at the intended settings, control/valve arrangement, hose/coupling dimensions, return/back-pressure and any case-drain requirement against the current hydraulic drawing. Separate catalogue ranges or maxima do not establish one approved simultaneous running point.
Where can I check the source and current documents for WGWS20?
Use P03 physical PDF page 27 and the model-reference CSV linked on this page. Each exported parameter retains its source ID and physical page. Catalogue sketches, source images and selection tables are reference information; request the current mounting/connection drawing, operating and maintenance instructions and model-specific evidence for the actual ordered configuration.
Which parts and options should the WGWS20 quotation identify?
Identify the jaw form, pins, rotation equipment and any material/temperature-specific requirements. Confirm the exact configuration and each included item rather than using a family illustration as a packing list.
Related model references
Product type and related work stages
Orange Peel Grapples
Gather and transfer loose, bulky or irregular material with the WOG multi-tine grapple range.
10 listed modelsView type, details & selection →Hydraulic Steel Shears
Cut steel sections and prepare metal for handling with the WHS hydraulic steel-shear range.
5 listed modelsView type, details & selection →Mechanical Grapples
Grip material using the WGM mechanical-grapple configuration.
4 listed modelsView type, details & selection →Car Dismantling Shears
Grip and cut vehicle components during controlled dismantling with the WVS shear range.
2 listed modelsView type, details & selection →Fixed Pulverizers
Reduce concrete in secondary processing with the WFP fixed-pulverizer range.
6 listed modelsView type, details & selection →Rotating Pulverizers
Position the jaws around concrete and carry out secondary processing with the WRP rotating-pulverizer range.
3 listed modelsView type, details & selection →Pulverizers with Magnet
Combine concrete processing with a separately specified magnetic-recovery arrangement.
1 listed modelsView type, details & selection →Wood & Stone Grapples
Grip and position timber, stone or irregular material with a jaw configuration chosen for the load.
5 listed modelsView type, details & selection →Selector & Demolition Grabs
Sort, pick and position demolition material with a selector-grab jaw arrangement.
Specify your configurationView type, details & selection →