Excavator attachment supply · Ningbo, China Search · FAQ · Support · Market / EnglishWhatsApp +86 15058273161
WE-ATTACH

Construction & Earthwork / WORK SCENARIO

Loosen, then compact

Loosening resistant material and compacting placed fill are separate operations. Specify the ripper geometry or compactor plate, access and machine/circuit data for the relevant stage.

MAKE THE REQUIREMENT SPECIFIC

Work conditions to carry into selection.

Loosening resistant material and compacting placed fill are separate operations. Specify the ripper geometry or compactor plate, access and machine/circuit data for the relevant stage.

Product-specific inputs for this work stage
Tool choiceInformation to provideApplicable conditions
Rippers ↗Material; tooth configuration; pin/centre/width; reach; current drawing and work arrangement.A ripper is not a compactor. No production rate or material hardness capability follows from the carrier reference alone.
Upgraded Vibratory Compactors ↗Material/work area; reach; base geometry; pressure/flow/return conditions; mounting; required project result.A catalogue vibration/force value is not a verified compaction result. Confirm material, operating conditions, return requirements and the actual supplied control arrangement.

Compare the relevant product configurations.

Source-listed models for further review.

Upgraded Vibratory Compactors ↗

Model-specific source values · original fields and units retained
Complete modelSource specification snapshotDetails & download
WEC04 ↗
SUITABLE EXCAVATOR,T
1-5
OIL FLOW RANGE,L/MIN
50-70
WORKING PRESSURE,BAR
80-120
Source P03 · p.33 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WEC06 ↗
SUITABLE EXCAVATOR,T
6-10
OIL FLOW RANGE,L/MIN
60-80
WORKING PRESSURE,BAR
90-130
Source P03 · p.33 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WEC15 ↗
SUITABLE EXCAVATOR,T
11-16
OIL FLOW RANGE,L/MIN
80-120
WORKING PRESSURE,BAR
100-140
Source P03 · p.33 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WEC20 ↗
SUITABLE EXCAVATOR,T
17-23
OIL FLOW RANGE,L/MIN
100-170
WORKING PRESSURE,BAR
150-180
Source P03 · p.33 ↗
All parameters and conditions ↗
Download reference · CSV ↗

Rippers ↗

Model-specific source values · original fields and units retained
Complete modelSource specification snapshotDetails & download
WR02 ↗
SUITABLE EXCAVATOR, T
2-4
OPENING WIDTH, MM
110-160
SHAFT DIAMETER, MM
35-40
Source P03 · p.36 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WR04 ↗
SUITABLE EXCAVATOR, T
5-8
OPENING WIDTH, MM
150-230
SHAFT DIAMETER, MM
40-55
Source P03 · p.36 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WR06 ↗
SUITABLE EXCAVATOR, T
9-16
OPENING WIDTH, MM
220-300
SHAFT DIAMETER, MM
60-70
Source P03 · p.36 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WR08 ↗
SUITABLE EXCAVATOR, T
17-23
OPENING WIDTH, MM
300-360
SHAFT DIAMETER, MM
80-90
Source P03 · p.36 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WR10 ↗
SUITABLE EXCAVATOR, T
24-30
OPENING WIDTH, MM
360-410
SHAFT DIAMETER, MM
90-100
Source P03 · p.36 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WR12 ↗
SUITABLE EXCAVATOR, T
31-35
OPENING WIDTH, MM
410-480
SHAFT DIAMETER, MM
100-110
Source P03 · p.36 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WR14 ↗
SUITABLE EXCAVATOR, T
36-45
OPENING WIDTH, MM
480-550
SHAFT DIAMETER, MM
110-120
Source P03 · p.36 ↗
All parameters and conditions ↗
Download reference · CSV ↗

Read the selection guidance.

Original product information.

PDF · 48 PAGES

Excavator Attachment Catalogue

View the original pages and retain the relevant version with your enquiry.

Continue through the work.

CONTINUE YOUR REVIEW

Related information for your next decision

Discuss your machine, application and configuration →

What do you need to do?

Start with part of a model or describe the job. Suggested results are for selection review.