Excavator attachment supply · Ningbo, China Search · FAQ · Support · Market / EnglishWhatsApp +86 15058273161
WE-ATTACH

WE-ATTACH / EXCAVATOR ATTACHMENTS

Mining & Quarrying

Loosening, breaking, reducing size and separating a fraction are different stages. Start with rock/material characteristics and the required output, then assess the machine, tooling and site conditions.

Explore the work stages

START WITH THE WORK

Separate breaking, excavation and material processing.

01

Loosen and break the material

Distinguish resistant ground that needs loosening from a breaking task. Provide material characteristics, working duty and carrier information instead of choosing by a general quarry label.

Explore this work scenario
02

Excavate and prepare the feed

Bucket width, capacity definition, teeth and wear arrangement belong with the material and machine. State feed size and the intended reduction process before comparing a crushing bucket.

Explore this work scenario
03

Separate the target fraction

Give material size, moisture, screen opening and feeding/handling conditions. A screen selection does not establish a universal production rate.

Explore this work scenario
04

Review cutting as its own configuration

A drum-cutter enquiry needs a current head/pick arrangement, machine circuit and a specific material/cutting task. The supplied family images alone do not approve use in every rock condition.

Explore this work scenario

The material and work stage

Loosening, breaking, reducing size and separating a fraction are different stages. Start with rock/material characteristics and the required output, then assess the machine, tooling and site conditions.

Information for the configuration review

Rock/material description; size and desired result; duty; machine/circuit; tooling and site arrangement. No mine productivity result is inferred.

Documents to keep with the proposal

Keep the complete model/suffix, machine and mounting information with the relevant drawing and operating requirements. The work stages above identify the product and document paths for this application.

Application scope

These are selection pathways drawn from the supplied product material. Confirm the exact configuration and site conditions; no customer project or measured site result is represented by the product photographs.

Start with the relevant attachment family

Model references and source specifications for this industry

Crushing Buckets ↗

Model-specific source values · original fields and units retained
Complete modelSource specification snapshotDetails & download
WBC20 ↗
SUITABLE EXCAVATOR,T
20-30
RECOMMENDED FLOW RATE,L/MIN
220
INLET OPENING SIZE,MM
850×430
Source P03 · p.34 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WBC30 ↗
SUITABLE EXCAVATOR,T
25-35
RECOMMENDED FLOW RATE,L/MIN
240
INLET OPENING SIZE,MM
910×540
Source P03 · p.34 ↗
All parameters and conditions ↗
Download reference · CSV ↗

Screening Buckets ↗

Model-specific source values · original fields and units retained
Complete modelSource specification snapshotDetails & download
WSB15 ↗
SUITABLE EXCAVATOR,T
10-15
RECOMMENDED FLOW RATE,L/MIN
70
DRUM DIAMETER,MM
1000
Source P03 · p.35 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WSB20 ↗
SUITABLE EXCAVATOR,T
15-20
RECOMMENDED FLOW RATE,L/MIN
70
DRUM DIAMETER,MM
1160
Source P03 · p.35 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WSB30 ↗
SUITABLE EXCAVATOR,T
22-28
RECOMMENDED FLOW RATE,L/MIN
70
DRUM DIAMETER,MM
1320
Source P03 · p.35 ↗
All parameters and conditions ↗
Download reference · CSV ↗

Rippers ↗

Model-specific source values · original fields and units retained
Complete modelSource specification snapshotDetails & download
WR02 ↗
SUITABLE EXCAVATOR, T
2-4
OPENING WIDTH, MM
110-160
SHAFT DIAMETER, MM
35-40
Source P03 · p.36 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WR04 ↗
SUITABLE EXCAVATOR, T
5-8
OPENING WIDTH, MM
150-230
SHAFT DIAMETER, MM
40-55
Source P03 · p.36 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WR06 ↗
SUITABLE EXCAVATOR, T
9-16
OPENING WIDTH, MM
220-300
SHAFT DIAMETER, MM
60-70
Source P03 · p.36 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WR08 ↗
SUITABLE EXCAVATOR, T
17-23
OPENING WIDTH, MM
300-360
SHAFT DIAMETER, MM
80-90
Source P03 · p.36 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WR10 ↗
SUITABLE EXCAVATOR, T
24-30
OPENING WIDTH, MM
360-410
SHAFT DIAMETER, MM
90-100
Source P03 · p.36 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WR12 ↗
SUITABLE EXCAVATOR, T
31-35
OPENING WIDTH, MM
410-480
SHAFT DIAMETER, MM
100-110
Source P03 · p.36 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WR14 ↗
SUITABLE EXCAVATOR, T
36-45
OPENING WIDTH, MM
480-550
SHAFT DIAMETER, MM
110-120
Source P03 · p.36 ↗
All parameters and conditions ↗
Download reference · CSV ↗

Heavy-duty Hydraulic Breakers ↗

Model-specific source values · original fields and units retained
Complete modelSource specification snapshotDetails & download
WHB175 ↗
SUITABLE EXCAVATOR, T
36-45
OIL FLOW RANGE, L/MIN
200-260
DIAMETER OF HOSE, INCH
11/4
Source P03 · p.46 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WHB185 ↗
SUITABLE EXCAVATOR, T
48-60
OIL FLOW RANGE, L/MIN
240-300
DIAMETER OF HOSE, INCH
11/4
Source P03 · p.46 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WHB195 ↗
SUITABLE EXCAVATOR, T
48-60
OIL FLOW RANGE, L/MIN
290-360
DIAMETER OF HOSE, INCH
11/4
Source P03 · p.46 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WHB200 ↗
SUITABLE EXCAVATOR, T
48-60
OIL FLOW RANGE, L/MIN
300-370
DIAMETER OF HOSE, INCH
11/4
Source P03 · p.46 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WHB205 ↗
SUITABLE EXCAVATOR, T
55-65
OIL FLOW RANGE, L/MIN
320-390
DIAMETER OF HOSE, INCH
11/2
Source P03 · p.46 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WHB210 ↗
SUITABLE EXCAVATOR, T
55-65
OIL FLOW RANGE, L/MIN
340-420
DIAMETER OF HOSE, INCH
11/2
Source P03 · p.47 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WHB215 ↗
SUITABLE EXCAVATOR, T
65-75
OIL FLOW RANGE, L/MIN
360-460
DIAMETER OF HOSE, INCH
11/2
Source P03 · p.47 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WHB220 ↗
SUITABLE EXCAVATOR, T
65-80
OIL FLOW RANGE, L/MIN
350-400
DIAMETER OF HOSE, INCH
11/2
Source P03 · p.47 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WHB230 ↗
SUITABLE EXCAVATOR, T
80-100
OIL FLOW RANGE, L/MIN
420-540
DIAMETER OF HOSE, INCH
11/2
Source P03 · p.47 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WHB248 ↗
SUITABLE EXCAVATOR, T
85-120
OIL FLOW RANGE, L/MIN
450-550
DIAMETER OF HOSE, INCH
11/2
Source P03 · p.47 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WHB258 ↗
SUITABLE EXCAVATOR, T
87-140
OIL FLOW RANGE, L/MIN
500-600
DIAMETER OF HOSE, INCH
11/2
Source P03 · p.47 ↗
All parameters and conditions ↗
Download reference · CSV ↗

Selection and purchase guidance

Source and document traceability

Catalogue transcription for preliminary review. Confirm the applicable configuration and current approved revision before order.

CONTINUE YOUR REVIEW

Related information for your next decision

Discuss your machine, application and configuration →

What do you need to do?

Start with part of a model or describe the job. Suggested results are for selection review.