Excavator attachment supply · Ningbo, China Search · FAQ · Support · Market / EnglishWhatsApp +86 15058273161
WE-ATTACH

Mining & Quarrying / WORK SCENARIO

Loosen and break the material

Distinguish resistant ground that needs loosening from a breaking task. Provide material characteristics, working duty and carrier information instead of choosing by a general quarry label.

MAKE THE REQUIREMENT SPECIFIC

Work conditions to carry into selection.

Distinguish resistant ground that needs loosening from a breaking task. Provide material characteristics, working duty and carrier information instead of choosing by a general quarry label.

Product-specific inputs for this work stage
Tool choiceInformation to provideApplicable conditions
Rippers ↗Material; tooth configuration; pin/centre/width; reach; current drawing and work arrangement.A ripper is not a compactor. No production rate or material hardness capability follows from the carrier reference alone.
Heavy-duty Hydraulic Breakers ↗Material/duty; exact housing and bracket; tool; pressure/flow/return conditions; machine/model/year.Tool diameter is not the same as every model-number suffix. Confirm return conditions, mounting and operating instructions; catalogue frequency is not a guaranteed jobsite output.

Compare the relevant product configurations.

Source-listed models for further review.

Rippers ↗

Model-specific source values · original fields and units retained
Complete modelSource specification snapshotDetails & download
WR02 ↗
SUITABLE EXCAVATOR, T
2-4
OPENING WIDTH, MM
110-160
SHAFT DIAMETER, MM
35-40
Source P03 · p.36 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WR04 ↗
SUITABLE EXCAVATOR, T
5-8
OPENING WIDTH, MM
150-230
SHAFT DIAMETER, MM
40-55
Source P03 · p.36 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WR06 ↗
SUITABLE EXCAVATOR, T
9-16
OPENING WIDTH, MM
220-300
SHAFT DIAMETER, MM
60-70
Source P03 · p.36 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WR08 ↗
SUITABLE EXCAVATOR, T
17-23
OPENING WIDTH, MM
300-360
SHAFT DIAMETER, MM
80-90
Source P03 · p.36 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WR10 ↗
SUITABLE EXCAVATOR, T
24-30
OPENING WIDTH, MM
360-410
SHAFT DIAMETER, MM
90-100
Source P03 · p.36 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WR12 ↗
SUITABLE EXCAVATOR, T
31-35
OPENING WIDTH, MM
410-480
SHAFT DIAMETER, MM
100-110
Source P03 · p.36 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WR14 ↗
SUITABLE EXCAVATOR, T
36-45
OPENING WIDTH, MM
480-550
SHAFT DIAMETER, MM
110-120
Source P03 · p.36 ↗
All parameters and conditions ↗
Download reference · CSV ↗

Heavy-duty Hydraulic Breakers ↗

Model-specific source values · original fields and units retained
Complete modelSource specification snapshotDetails & download
WHB175 ↗
SUITABLE EXCAVATOR, T
36-45
OIL FLOW RANGE, L/MIN
200-260
DIAMETER OF HOSE, INCH
11/4
Source P03 · p.46 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WHB185 ↗
SUITABLE EXCAVATOR, T
48-60
OIL FLOW RANGE, L/MIN
240-300
DIAMETER OF HOSE, INCH
11/4
Source P03 · p.46 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WHB195 ↗
SUITABLE EXCAVATOR, T
48-60
OIL FLOW RANGE, L/MIN
290-360
DIAMETER OF HOSE, INCH
11/4
Source P03 · p.46 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WHB200 ↗
SUITABLE EXCAVATOR, T
48-60
OIL FLOW RANGE, L/MIN
300-370
DIAMETER OF HOSE, INCH
11/4
Source P03 · p.46 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WHB205 ↗
SUITABLE EXCAVATOR, T
55-65
OIL FLOW RANGE, L/MIN
320-390
DIAMETER OF HOSE, INCH
11/2
Source P03 · p.46 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WHB210 ↗
SUITABLE EXCAVATOR, T
55-65
OIL FLOW RANGE, L/MIN
340-420
DIAMETER OF HOSE, INCH
11/2
Source P03 · p.47 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WHB215 ↗
SUITABLE EXCAVATOR, T
65-75
OIL FLOW RANGE, L/MIN
360-460
DIAMETER OF HOSE, INCH
11/2
Source P03 · p.47 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WHB220 ↗
SUITABLE EXCAVATOR, T
65-80
OIL FLOW RANGE, L/MIN
350-400
DIAMETER OF HOSE, INCH
11/2
Source P03 · p.47 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WHB230 ↗
SUITABLE EXCAVATOR, T
80-100
OIL FLOW RANGE, L/MIN
420-540
DIAMETER OF HOSE, INCH
11/2
Source P03 · p.47 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WHB248 ↗
SUITABLE EXCAVATOR, T
85-120
OIL FLOW RANGE, L/MIN
450-550
DIAMETER OF HOSE, INCH
11/2
Source P03 · p.47 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WHB258 ↗
SUITABLE EXCAVATOR, T
87-140
OIL FLOW RANGE, L/MIN
500-600
DIAMETER OF HOSE, INCH
11/2
Source P03 · p.47 ↗
All parameters and conditions ↗
Download reference · CSV ↗

Read the selection guidance.

Original product information.

PDF · 48 PAGES

Excavator Attachment Catalogue

View the original pages and retain the relevant version with your enquiry.

Continue through the work.

CONTINUE YOUR REVIEW

Related information for your next decision

Discuss your machine, application and configuration →

What do you need to do?

Start with part of a model or describe the job. Suggested results are for selection review.