Excavator attachment supply · Ningbo, China Search · FAQ · Support · Market / EnglishWhatsApp +86 15058273161
WE-ATTACH

Demolition & Recycling / WORK SCENARIO

Separate structural breaking from rubble processing

State whether the material is still part of a structure or already on the ground. Include section size, reinforcement, access and desired result before comparing a breaker, crusher or pulverizer. Compare the supplied crusher and pulverizer forms separately; a rotation or magnet arrangement does not establish a different concrete-processing or lifting rating without the applicable model data.

MAKE THE REQUIREMENT SPECIFIC

Work conditions to carry into selection.

State whether the material is still part of a structure or already on the ground. Include section size, reinforcement, access and desired result before comparing a breaker, crusher or pulverizer. Compare the supplied crusher and pulverizer forms separately; a rotation or magnet arrangement does not establish a different concrete-processing or lifting rating without the applicable model data.

Product-specific inputs for this work stage
Tool choiceInformation to provideApplicable conditions
Medium-duty Hydraulic Breakers ↗Material/duty; exact housing and bracket; tool; pressure/flow/return conditions; machine/model/year.Tool diameter is not the same as every model-number suffix. Confirm return conditions, mounting and operating instructions; catalogue frequency is not a guaranteed jobsite output.
CR Hydraulic Crushers ↗Concrete/reinforcement; processing stage; jaw opening; mounting/stability; rotation and cylinder circuits.CR and CC are separate configurations. Do not assume identical opening, dimensions or duty from similar model numbers; casting/strength and life claims need applicable evidence.
Fixed Pulverizers ↗Concrete/reinforcement; opening; tooth/plate configuration; mounting; circuit; requested processing result.Do not infer processing rate, noise reduction, magnetic lifting capacity or circuit requirements that are absent from the exact model documents.
CC Hydraulic Crushers ↗Concrete/reinforcement; processing stage; jaw opening; mounting/stability; rotation and cylinder circuits.CR and CC are separate configurations. Do not assume identical opening, dimensions or duty from similar model numbers; casting/strength and life claims need applicable evidence.
Rotating Pulverizers ↗Concrete/reinforcement; opening; tooth/plate configuration; mounting; circuit; requested processing result.Do not infer processing rate, noise reduction, magnetic lifting capacity or circuit requirements that are absent from the exact model documents.
Pulverizers with Magnet ↗Concrete/reinforcement; opening; tooth/plate configuration; mounting; circuit; requested processing result.Do not infer processing rate, noise reduction, magnetic lifting capacity or circuit requirements that are absent from the exact model documents.

Compare the relevant product configurations.

Source-listed models for further review.

CR Hydraulic Crushers ↗

Model-specific source values · original fields and units retained
Complete modelSource specification snapshotDetails & download
WCR10 ↗
SUITABLE EXCAVATOR,T
11-16
CYLINDER OIL FLOW,L/MIN
60-120
MOTOR OIL FLOW,L/MIN
20-30
Source P03 · p.18 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WCR15 ↗
SUITABLE EXCAVATOR,T
17-25
CYLINDER OIL FLOW,L/MIN
140-240
MOTOR OIL FLOW,L/MIN
30-50
Source P03 · p.18 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WCR20 ↗
SUITABLE EXCAVATOR,T
26-35
CYLINDER OIL FLOW,L/MIN
180-240
MOTOR OIL FLOW,L/MIN
30-50
Source P03 · p.18 ↗
All parameters and conditions ↗
Download reference · CSV ↗

CC Hydraulic Crushers ↗

Model-specific source values · original fields and units retained
Complete modelSource specification snapshotDetails & download
WCC10 ↗
SUITABLE EXCAVATOR,T
6-13
CYLINDER OIL FLOW,L/MIN
50-100
MOTOR OIL FLOW,L/MIN
20-30
Source P03 · p.19 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WCC15 ↗
SUITABLE EXCAVATOR,T
17-25
CYLINDER OIL FLOW,L/MIN
140-240
MOTOR OIL FLOW,L/MIN
30-50
Source P03 · p.19 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WCC20 ↗
SUITABLE EXCAVATOR,T
26-35
CYLINDER OIL FLOW,L/MIN
180-240
MOTOR OIL FLOW,L/MIN
30-50
Source P03 · p.19 ↗
All parameters and conditions ↗
Download reference · CSV ↗

Rotating Pulverizers ↗

Model-specific source values · original fields and units retained
Complete modelSource specification snapshotDetails & download
WRP18C ↗
SUITABLE EXCAVATOR,T
15-20
CYLINDER OIL FLOW,L/MIN
140-240
MOTOR OIL FLOW,L/MIN
30-50
Source P03 · p.21 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WRP20 ↗
SUITABLE EXCAVATOR,T
20-30
CYLINDER OIL FLOW,L/MIN
180-240
MOTOR OIL FLOW,L/MIN
30-50
Source P03 · p.21 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WRP20C ↗
SUITABLE EXCAVATOR,T
20-30
CYLINDER OIL FLOW,L/MIN
180-240
MOTOR OIL FLOW,L/MIN
30-50
Source P03 · p.21 ↗
All parameters and conditions ↗
Download reference · CSV ↗

Fixed Pulverizers ↗

Model-specific source values · original fields and units retained
Complete modelSource specification snapshotDetails & download
WFP08 ↗
SUITABLE EXCAVATOR,T
7-10
OIL FLOW,L/MIN
60-120
MAX. OPENING WIDTH,MM
620
Source P03 · p.22 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WFP15 ↗
SUITABLE EXCAVATOR,T
11-17
OIL FLOW,L/MIN
140-240
MAX. OPENING WIDTH,MM
750
Source P03 · p.22 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WFP20 ↗
SUITABLE EXCAVATOR,T
18-27
OIL FLOW,L/MIN
180-240
MAX. OPENING WIDTH,MM
850
Source P03 · p.22 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WFP20I ↗
SUITABLE EXCAVATOR,T
18-27
OIL FLOW,L/MIN
180-240
MAX. OPENING WIDTH,MM
760
Source P03 · p.22 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WFP30 ↗
SUITABLE EXCAVATOR,T
28-45
OIL FLOW,L/MIN
200-250
MAX. OPENING WIDTH,MM
1150
Source P03 · p.22 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WFP30C ↗
SUITABLE EXCAVATOR,T
28-45
OIL FLOW,L/MIN
200-250
MAX. OPENING WIDTH,MM
1085
Source P03 · p.22 ↗
All parameters and conditions ↗
Download reference · CSV ↗

Pulverizers with Magnet ↗

Model-specific source values · original fields and units retained
Complete modelSource specification snapshotDetails & download
WMP20-M ↗
SUITABLE EXCAVATOR, T
18-27
OIL FLOW RANGE, L/MIN
180-240
MAX. OPENING WIDTH, MM
760
Source P03 · p.23 ↗
All parameters and conditions ↗
Download reference · CSV ↗

Medium-duty Hydraulic Breakers ↗

Model-specific source values · original fields and units retained
Complete modelSource specification snapshotDetails & download
WHB125 ↗
SUITABLE EXCAVATOR, T
15-18
OIL FLOW RANGE, L/MIN
90-120
DIAMETER OF HOSE, INCH
1
Source P03 · p.44 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WHB135 ↗
SUITABLE EXCAVATOR, T
18-26
OIL FLOW RANGE, L/MIN
130-150
DIAMETER OF HOSE, INCH
1
Source P03 · p.44 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WHB135F ↗
SUITABLE EXCAVATOR, T
18-26
OIL FLOW RANGE, L/MIN
145-180
DIAMETER OF HOSE, INCH
1
Source P03 · p.44 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WHB135M ↗
SUITABLE EXCAVATOR, T
18-26
OIL FLOW RANGE, L/MIN
115-160
DIAMETER OF HOSE, INCH
1
Source P03 · p.44 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WHB140 ↗
SUITABLE EXCAVATOR, T
18-26
OIL FLOW RANGE, L/MIN
120-180
DIAMETER OF HOSE, INCH
1
Source P03 · p.45 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WHB140A ↗
SUITABLE EXCAVATOR, T
18-26
OIL FLOW RANGE, L/MIN
120-180
DIAMETER OF HOSE, INCH
1
Source P03 · p.45 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WHB150 ↗
SUITABLE EXCAVATOR, T
27-35
OIL FLOW RANGE, L/MIN
150-190
DIAMETER OF HOSE, INCH
1
Source P03 · p.45 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WHB155 ↗
SUITABLE EXCAVATOR, T
28-35
OIL FLOW RANGE, L/MIN
180-240
DIAMETER OF HOSE, INCH
11/4
Source P03 · p.45 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WHB165 ↗
SUITABLE EXCAVATOR, T
35-40
OIL FLOW RANGE, L/MIN
200-250
DIAMETER OF HOSE, INCH
11/4
Source P03 · p.45 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WHB160 ↗
SUITABLE EXCAVATOR, T
35-40
OIL FLOW RANGE, L/MIN
190-240
DIAMETER OF HOSE, INCH
11/4
Source P03 · p.45 ↗
All parameters and conditions ↗
Download reference · CSV ↗

Read the selection guidance.

Original product information.

PDF · 48 PAGES

Excavator Attachment Catalogue

View the original pages and retain the relevant version with your enquiry.

Continue through the work.

Demolition & Recycling

Specify the steel-cutting step

Give the material section, thickness and required mounting position. Jaw opening and a generic shear name do not establish the cutting capability for your steel.

Explore the scenario →
Demolition & Recycling

Sort and transfer the material

Describe the mixed material, size, shape and expected handled load. Select jaw/tine form and rotation needs separately from the machine lifting envelope.

Explore the scenario →
Demolition & Recycling

Define size reduction or separation

Crushing reduces material size; screening separates a specified fraction. State feed conditions, moisture and intended output so the process can be discussed clearly.

Explore the scenario →
Demolition & Recycling

Separate the dismantling tool from the holding frame

For a vehicle-dismantling proposal, describe the material, access and required work sequence. The dismantling shear is a cutting configuration; the pressing frame is a separate holding arrangement. Keep their mounting, carrier and hydraulic information distinct and request the relevant drawings for the proposed setup.

Explore the scenario →
Demolition & Recycling

Identify the breaker and its lubrication requirements

Keep the full breaker model, lubrication points and operating information with the service requirement. An automatic grease device is a support component, not an alternative breaking tool. Confirm the actual connection, lubricant requirements and service instructions for the proposed breaker configuration.

Explore the scenario →

CONTINUE YOUR REVIEW

Related information for your next decision

Discuss your machine, application and configuration →

What do you need to do?

Start with part of a model or describe the job. Suggested results are for selection review.