FROM AN IDEA TO A REQUIREMENT
What to specify for this attachment
Use these decisions to turn the work requirement into a model and configuration enquiry.
| Decision | Why it matters | Information to provide |
|---|---|---|
| Work stage and material | Steel cutting, primary concrete processing and secondary reduction are not interchangeable. | Material, section/reinforcement and the proposed work sequence. |
| Jaw and mounting arrangement | Opening and tool position affect access and the working envelope. | Section/block size, mounting position and required reach/clearance. |
| Hydraulics and positioning | Working and rotation requirements belong to the exact head arrangement. | Machine, flow, pressure and the required rotation circuit. |
| Wear parts and documents | Blade/tooth arrangement and technical revision stay with the configuration. | Full model/suffix, blade/teeth information and current drawing requirements. |
Structure and functions in the supplied material
The catalogue provides a jaw drawing, opening/weight, hydraulic requirements and dimensional keys. The source’s construction descriptions must be tied to the actual manufacturing configuration.
Models and parameter comparison
| Parameter | WCC10 ↗ | WCC15 ↗ | WCC20 ↗ |
|---|---|---|---|
| MAX. OPENING WIDTH,MM | 580 | 850 | 1000 |
| WEIGHT,KG | 570 | 2060 | 2680 |
| CRUSHING FORCE,KN | 278 | 886 | 1200 |
| SHEARING FORCE,KN | 700 | 2250 | 3020 |
| CYLINDER WORKING PRESSURE, BAR | 180-250 | 300-350 | 300-350 |
| CYLINDER OIL FLOW,L/MIN | 50-100 | 140-240 | 180-240 |
| MOTOR WORKING PRESSURE,BAR | 60-90 | 120-160 | 120-160 |
| MOTOR OIL FLOW,L/MIN | 20-30 | 30-50 | 30-50 |
| SUITABLE EXCAVATOR,T | 6-13 | 17-25 | 26-35 |
| ROTATION MODE | MECHANICAL OR HYDRAULIC, 360° FREE ROTATION | MECHANICAL OR HYDRAULIC, 360° FREE ROTATION | MECHANICAL OR HYDRAULIC, 360° FREE ROTATION |
| A | 1155 | 1815 | 2017 |
| B | 580 | 850 | 1000 |
| C | 240 | 420 | 480 |
| D | 486 | 662 | 732 |
| E | 357 | 639 | 718 |
Tasks, applications and buyer value
Separate material size, reinforcement and processing stage before comparing the opening, geometry and force definition.
Selection inputs and applicable conditions
Concrete/reinforcement; processing stage; jaw opening; mounting/stability; rotation and cylinder circuits.
CR and CC are separate configurations. Do not assume identical opening, dimensions or duty from similar model numbers; casting/strength and life claims need applicable evidence.
Plan the work around the attachment
Describe the task
Provide the work stage, material, access and required result. Keep those conditions with the model comparison.
Match the machine and attachment
Confirm machine identity, mounting dimensions, attachment mass and relevant hydraulic information against the documented model data.
Keep the technical package together
Request the installation and operating information, wear parts and applicable inspection documents for the exact proposed configuration.
Available information and source documents
The supplied family material supports this type entry. Complete order configuration, current drawing and applicable operation documents remain part of the model review.
Selection and purchase guidance
Where this tool fits in the work.
Questions specific to this type
What should I compare before choosing CC Hydraulic Crushers?
Concrete/reinforcement; processing stage; jaw opening; mounting/stability; rotation and cylinder circuits.
Which limits remain important for the purchase?
CR and CC are separate configurations. Do not assume identical opening, dimensions or duty from similar model numbers; casting/strength and life claims need applicable evidence.
