Excavator attachment supply · Ningbo, China Search · FAQ · Support · Market / EnglishWhatsApp +86 15058273161
WE-ATTACH

Construction & Earthwork / WORK SCENARIO

Clean and finish the surface

A toothless cleaning bucket shapes a different contact surface from a digging bucket. If the job needs angled positioning, compare a tilting bucket and a tilting coupler as separate configurations.

MAKE THE REQUIREMENT SPECIFIC

Work conditions to carry into selection.

A toothless cleaning bucket shapes a different contact surface from a digging bucket. If the job needs angled positioning, compare a tilting bucket and a tilting coupler as separate configurations.

Product-specific inputs for this work stage
Tool choiceInformation to provideApplicable conditions
Cleaning Buckets ↗Width/capacity definition; material/density; edge/teeth; interface; desired result.Width, capacity, mounting geometry and edge/teeth must be specified for the selected excavator. A product image does not establish an orderable model or rated capacity.
Tilt Buckets ↗Width; desired tilt; terrain/task; interface; cylinder circuit; clearance.Confirm the exact angle and cylinder arrangement for the ordered model rather than assigning a family-wide angle.
Tilting D Couplers ↗Required tilt angle; locking interface; swing-cylinder flow/pressure; connected tool geometry and clearance.Tilt range is model-specific. A tilting coupler is not automatically a 360-degree rotating coupler or a tiltrotator.

Compare the relevant product configurations.

Source-listed models for further review.

Tilting D Couplers ↗

Model-specific source values · original fields and units retained
Complete modelSource specification snapshotDetails & download
WTD02 ↗
SUITABLE CARRIER,T
1-2.5
CYLINDER FLOW RATE,L/MIN
10-30
SWING CYLINDER WORKING FLOW,L/MIN
2-4
Source P03 · p.10 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WTD03 ↗
SUITABLE CARRIER,T
3-4
CYLINDER FLOW RATE,L/MIN
10-30
SWING CYLINDER WORKING FLOW,L/MIN
5-16
Source P03 · p.10 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WTD04 ↗
SUITABLE CARRIER,T
5-6.5
CYLINDER FLOW RATE,L/MIN
10-30
SWING CYLINDER WORKING FLOW,L/MIN
5-16
Source P03 · p.10 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WTD05 ↗
SUITABLE CARRIER,T
7-10
CYLINDER FLOW RATE,L/MIN
10-30
SWING CYLINDER WORKING FLOW,L/MIN
15-44
Source P03 · p.10 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WTD06 ↗
SUITABLE CARRIER,T
11-17
CYLINDER FLOW RATE,L/MIN
10-30
SWING CYLINDER WORKING FLOW,L/MIN
19-58
Source P03 · p.10 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WTD08 ↗
SUITABLE CARRIER,T
18-26
CYLINDER FLOW RATE,L/MIN
10-30
SWING CYLINDER WORKING FLOW,L/MIN
35-105
Source P03 · p.10 ↗
All parameters and conditions ↗
Download reference · CSV ↗

Tilt Buckets ↗

Model-specific source values · original fields and units retained
Complete modelSource specification snapshotDetails & download
WTB01 ↗
SUITABLE EXCAVATOR,T
2-4
TILT OIL FLOW, L/MIN
13-18
MAX. OPERATINGPRESSURE, BAR
230
Source P03 · p.39 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WTB02 ↗
SUITABLE EXCAVATOR,T
5-6
TILT OIL FLOW, L/MIN
15-20
MAX. OPERATINGPRESSURE, BAR
230
Source P03 · p.39 ↗
All parameters and conditions ↗
Download reference · CSV ↗

Read the selection guidance.

BUYING GUIDE

Bucket selection: task, material and interface

Crushing, screening, clamshell handling, cleaning and digging are different tasks. Supplied image families also include tilt, rock and multi-purpose configurations.

Read the guide →

BUYING GUIDE

Crushing vs screening buckets: separate the process

The supplied crushing-bucket page describes breaking feed material on site. The screening-bucket page describes separating material by a screen arrangement. Size reduction and separation are different process requirements.

Read the guide →

BUYING GUIDE

Prepare a multi-attachment fleet compatibility record

Record exact model/year, machine weight, available interface drawings and hydraulic circuit information. Group by confirmed configuration rather than tonne class alone.

Read the guide →

BUYING GUIDE

Quick coupler types and configuration review

The supplied WHC, WCQ, WDQ, WSQ, WTD, WTS and WRQ pages distinguish hydraulic, cast, double-lock, tilting and rotating types. Rotation and tilt are different functions; a rotating quick coupler is not automatically a tiltrotator.

Read the guide →

BUYING GUIDE

How to prepare quick coupler measurements

The pre-order form identifies front and rear pin diameters A1/A2, centre distance B and widths C1/C2. Record what each width measures, include units and attach labelled photographs or a drawing.

Read the guide →

BUYING GUIDE

What to include in an attachment quotation request

The supplied order process covers customer identity, machine brand/model/year, installation dimensions/oil ports, working conditions, function/specification and a completeness check.

Read the guide →

BUYING GUIDE

Machine and attachment compatibility information

Provide exact brand, model and year, working weight and available machine documents. Add serial information when needed for configuration review.

Read the guide →

BUYING GUIDE

Read the quick coupler warranty by component

The supplied quick-coupler matrix distinguishes body, hydraulic lock, cylinder, valve, pins, hoses and switch. Standard and rotating arrangements have different conditions.

Read the guide →

BUYING GUIDE

Rotating vs tilting couplers: choose the movement you need

A rotary coupler changes the tool orientation through the 360-degree rotation described in the R-series source. A tilting coupler changes the tool angle within its model-specific tilt range. These are different motions; neither label alone establishes a tiltrotator.

Read the guide →

Original product information.

PDF · 48 PAGES

Excavator Attachment Catalogue

View the original pages and retain the relevant version with your enquiry.

PDF · 12 PAGES

Quick Coupler Selection Guide

View the original pages and retain the relevant version with your enquiry.

Continue through the work.

CONTINUE YOUR REVIEW

Related information for your next decision

Discuss your machine, application and configuration →

What do you need to do?

Start with part of a model or describe the job. Suggested results are for selection review.