Excavator attachment supply · Ningbo, China Search · FAQ · Support · Market / EnglishWhatsApp +86 15058273161
WE-ATTACH

Buckets

Tilt Buckets

2 catalogue models

Adjust the bucket angle for grading, slopes and trench finishing with the WTB tilting-bucket range.

Compare the required bucket tilt and width with machine clearance and the desired surface or trench geometry.

Supplied product-type image; confirm the exact ordered configuration.

FROM AN IDEA TO A REQUIREMENT

What to specify for this attachment

Use these decisions to turn the work requirement into a model and configuration enquiry.

Information to carry into the review
DecisionWhy it mattersInformation to provide
Task and contact geometryDigging, cleaning, grading, gripping, crushing and screening are different work stages.The job and required surface, opening or output fraction.
Material and capacity definitionWidth or nominal volume alone does not describe the working load.Material size, density/moisture and width/capacity requirements.
Edge, teeth or process partsWear and working parts depend on the selected bucket arrangement.Required edge/teeth, screen or crushing configuration.
Machine and powered functionsThe mounting and any powered movement must be reviewed with the machine.Carrier, connection dimensions and hydraulic information where applicable.

Structure and functions in the supplied material

The WTB source table gives width, weight and carrier references; the supplied product text describes a cylinder/balance-control tilting arrangement.

Models and parameter comparison

Source model data · units retained · exact configuration requires review
ParameterWTB01 ↗WTB02 ↗
WIDTH, MM10001500
WEIGHT, KG135220
CAPACITY, M30.110.225
MAX. OPERATINGPRESSURE, BAR230230
TILT OIL FLOW, L/MIN13-1815-20
SUITABLE EXCAVATOR,T2-45-6

Tasks, applications and buyer value

Compare the required bucket tilt and width with machine clearance and the desired surface or trench geometry.

Selection inputs and applicable conditions

Width; desired tilt; terrain/task; interface; cylinder circuit; clearance.

Confirm the exact angle and cylinder arrangement for the ordered model rather than assigning a family-wide angle.

Plan the work around the attachment

  1. Define the required result

    State whether the job is excavation, cleaning, grading, gripping, crushing or screening. Give the required width, finish or output fraction for the actual work.

  2. Describe material and machine

    Include material size, density and moisture, carrier identity, mounting dimensions and hydraulic data where the bucket has a powered function.

  3. Specify wear and service items

    Confirm edge or teeth, screen or jaw arrangement and replacement items with the selected configuration. A bucket illustration does not establish a production rate or rated capacity.

Available information and source documents

The supplied family material supports this type entry. Complete order configuration, current drawing and applicable operation documents remain part of the model review.

Selection and purchase guidance

Where this tool fits in the work.

Questions specific to this type

What should I compare before choosing Tilt Buckets?

Width; desired tilt; terrain/task; interface; cylinder circuit; clearance.

Which limits remain important for the purchase?

Confirm the exact angle and cylinder arrangement for the ordered model rather than assigning a family-wide angle.

CONTINUE YOUR REVIEW

Related information for your next decision

Discuss your machine, application and configuration →

What do you need to do?

Start with part of a model or describe the job. Suggested results are for selection review.