Excavator attachment supply · Ningbo, China Search · FAQ · Support · Market / EnglishWhatsApp +86 15058273161
WE-ATTACH

Quick Couplers

Review hydraulic, cast, double-lock, tilting and rotating couplers. Match both interfaces and the locking/circuit requirements.

CHOOSE THE FUNCTION BEFORE THE MODEL

Tool change, tilt or rotation?

Start with the movement your job needs. Fixed, tilting and rotating couplers solve different positioning requirements; both machine-side and tool-side interfaces stay part of the configuration.

8product types42source-listed models3work scenarios
Supplied family photograph; ordered configuration is confirmed on the type and model pages.

THE QUESTIONS THAT DEFINE YOUR SELECTION

  1. 01

    Which movement is required at the tool?

  2. 02

    What are the upper and lower connection dimensions?

  3. 03

    Which locking, rotation or tilt circuits are available?

THE FIRST BUYING DECISION

Compare the work each type is designed around.

A category name is the starting point. Compare the function and configuration inputs before opening a model.

Quick Couplers · functions and configuration inputs
TypePurpose / work stageModel informationSelection inputs
Hydraulic Quick Couplers ↗Change between excavator tools with a hydraulically operated quick-coupler connection.9 catalogue modelsPin diameters at both connections; centre distances; inside widths; locking configuration; hydraulic circuit.
Cast Quick Couplers ↗Connect excavator tools using the WCQ cast-body quick-coupler arrangement.2 catalogue modelsLength, L1/L2, widths, pin diameter, body height, locking method and machine/tool drawings.
Double-lock D Couplers ↗Connect excavator attachments with the WDQ D-type double-lock coupler range.8 catalogue modelsFront/rear connection geometry; locking sequence; cylinder flow/pressure; machine and attachment interface drawings.
Double-lock S Couplers ↗Connect tools through the WSQ S-type double-lock coupler range; compare the exact S-interface geometry.10 catalogue modelsPin diameter and centres; maximum opening; interface standard and revision; locking method; required circuit.
Tilting D Couplers ↗Tilt a connected attachment for slopes, trenches and angled work with the WTD D-type coupler.6 catalogue modelsRequired tilt angle; locking interface; swing-cylinder flow/pressure; connected tool geometry and clearance.
Tilting S Couplers ↗Add tool tilt to the WTS S-type coupler arrangement for angled excavation and finishing work.4 catalogue modelsS-type geometry; requested tilt angle; cylinder circuit; mounting envelope and attached tool.
Rotating Couplers ↗Rotate a connected excavator attachment through 360° with the R-series rotary quick coupler.3 catalogue modelsRotation-motor flow/pressure; cylinder flow/pressure; upper/lower connection dimensions; tool hydraulic demand; return conditions and clearance.
Mechanical Quick Couplers ↗Change excavator tools with a mechanically secured coupler configuration.Configuration to confirmBoth interfaces; locking and verification method; machine/tool drawings; requested documents.

Explore every Quick Couplers type.

What changes between configurations?

Hydraulic Quick Couplers · structure and conditions

The WHC quick-coupler arrangement places the tool connection below the excavator mounting. Pin diameter, centre distance and arm-width ranges define the connections to compare. The pressure and flow values refer to the coupler actuation circuit; they do not establish the requirements of a powered attachment connected below it.

Confirm the locking arrangement and operating/verification instructions for the complete ordered configuration. A dimension range does not prove a match to every machine in the listed tonne class.

Cast Quick Couplers · structure and conditions

The WCQ design is described with an integral cast body, a load-bearing lower plate, an extended movable jaw and an anti-drop mechanism. Compare that cast construction with the welded D-type arrangement, then confirm the locking details and mounting dimensions of the quoted model.

Do not substitute the WCQ drawing for a welded or double-lock model. Confirm the exact pin geometry and locking instructions.

Double-lock D Couplers · structure and conditions

The WDQ D-type arrangement is described with front and rear locks, a flat push structure and a load-bearing lower plate in a welded body. Locking sequence, pin geometry and tool clearance should be reviewed together; a D-type name alone does not define every compatible tool.

The presence of two locks is not a substitute for the model-specific installation, operating and lock-check instructions.

Double-lock S Couplers · structure and conditions

The WSQ series is listed as an S-type double-lock coupler. Its model table separates pin diameter, pin-centre distance, maximum opening, attachment weight and operating pressure/flow. Those dimensions describe the connection that must be checked against the machine and each intended tool.

The source phrase “OS standards” has not been converted into a named certification or assumed Open-S compatibility. Request the exact standard/interface definition.

Tilting D Couplers · structure and conditions

The WTD arrangement places a tilt mechanism between the upper excavator mounting and the lower tool connection. The supplied material identifies built-in hydraulic lines, a swing cylinder and dual mechanical locking. Coupler actuation and swing-cylinder flow/pressure appear as separate requirements in the model data.

Tilt range is model-specific. A tilting coupler is not automatically a 360-degree rotating coupler or a tiltrotator.

Tilting S Couplers · structure and conditions

The supplied table separates pin/centre/width, tilt angle, coupling circuit, swing-cylinder circuit, weight and carrier class.

The published angles differ by model. Do not transfer a D-type interface or another WTS model’s angle to this configuration.

Rotating Couplers · structure and conditions

The supplied R-series page identifies 360-degree rotation, a high-flow swivel joint, a gearbox drive and a steel/copper composite turbine. Rotation-motor and coupling-cylinder circuits have separate rows.

Rotation is not tilt. The swivel-joint description does not approve every breaker or compactor combination: the connected tool, return conditions, interfaces and machine stability must be reviewed.

Mechanical Quick Couplers · structure and conditions

The source lists a mechanical option alongside hydraulic, double-lock, tilting and rotating types.

No mechanical model, locking procedure or hydraulic parameter is invented; the photograph is a quick-coupler family reference.

Choose the working context.

Complete model directory and source data.

Hydraulic Quick Couplers ↗

Model-specific source values · original fields and units retained
Complete modelSource specification snapshotDetails & download
WHC01 ↗
SUITABLE CARRIER,T
1-2
OIL FLOW RANGE,L/MIN
10-30
PIN DIAMETER(ØD),MM
Ø25-Ø30
Source P03 · p.6 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WHC02 ↗
SUITABLE CARRIER,T
2.5-4
OIL FLOW RANGE,L/MIN
10-30
PIN DIAMETER(ØD),MM
Ø30-Ø40
Source P03 · p.6 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WHC03 ↗
SUITABLE CARRIER,T
5-6
OIL FLOW RANGE,L/MIN
10-30
PIN DIAMETER(ØD),MM
Ø40-Ø50
Source P03 · p.6 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WHC04 ↗
SUITABLE CARRIER,T
7-10
OIL FLOW RANGE,L/MIN
10-30
PIN DIAMETER(ØD),MM
Ø50-Ø60
Source P03 · p.6 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WHC06 ↗
SUITABLE CARRIER,T
11-17
OIL FLOW RANGE,L/MIN
10-30
PIN DIAMETER(ØD),MM
Ø60-Ø70
Source P03 · p.6 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WHC08 ↗
SUITABLE CARRIER,T
18-25
OIL FLOW RANGE,L/MIN
10-30
PIN DIAMETER(ØD),MM
Ø80-Ø90
Source P03 · p.6 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WHC10 ↗
SUITABLE CARRIER,T
25-36
OIL FLOW RANGE,L/MIN
10-30
PIN DIAMETER(ØD),MM
Ø90-Ø100
Source P03 · p.6 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WHC14 ↗
SUITABLE CARRIER,T
36-45
OIL FLOW RANGE,L/MIN
10-30
PIN DIAMETER(ØD),MM
Ø100-Ø110
Source P03 · p.6 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WHC17 ↗
SUITABLE CARRIER,T
45-55
OIL FLOW RANGE,L/MIN
10-30
PIN DIAMETER(ØD),MM
Ø110-Ø130
Source P03 · p.6 ↗
All parameters and conditions ↗
Download reference · CSV ↗

Cast Quick Couplers ↗

Model-specific source values · original fields and units retained
Complete modelSource specification snapshotDetails & download
WCQ06 ↗
LENGTH,MM
930
L1,MM
375
ØD,MM
65
Source P03 · p.7 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WCQ08 ↗
LENGTH,MM
1052
L1,MM
470
ØD,MM
80
Source P03 · p.7 ↗
All parameters and conditions ↗
Download reference · CSV ↗

Double-lock D Couplers ↗

Model-specific source values · original fields and units retained
Complete modelSource specification snapshotDetails & download
WDQ02 ↗
SUITABLE CARRIER,T
1-2
REQUIRED FLOW,L/MIN
10-30
PIN DIAMETER(ØD),MM
25-30
Source P03 · p.8 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WDQ03 ↗
SUITABLE CARRIER,T
2.5-4
REQUIRED FLOW,L/MIN
10-30
PIN DIAMETER(ØD),MM
35-40
Source P03 · p.8 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WDQ04 ↗
SUITABLE CARRIER,T
5-6
REQUIRED FLOW,L/MIN
10-30
PIN DIAMETER(ØD),MM
45
Source P03 · p.8 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WDQ05 ↗
SUITABLE CARRIER,T
7-10
REQUIRED FLOW,L/MIN
10-30
PIN DIAMETER(ØD),MM
50-60
Source P03 · p.8 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WDQ06 ↗
SUITABLE CARRIER,T
11-17
REQUIRED FLOW,L/MIN
10-30
PIN DIAMETER(ØD),MM
60-70
Source P03 · p.8 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WDQ08 ↗
SUITABLE CARRIER,T
18-25
REQUIRED FLOW,L/MIN
10-30
PIN DIAMETER(ØD),MM
80-90
Source P03 · p.8 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WDQ09 ↗
SUITABLE CARRIER,T
25-36
REQUIRED FLOW,L/MIN
10-30
PIN DIAMETER(ØD),MM
90-100
Source P03 · p.8 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WDQ10 ↗
SUITABLE CARRIER,T
36-45
REQUIRED FLOW,L/MIN
10-30
PIN DIAMETER(ØD),MM
100-120
Source P03 · p.8 ↗
All parameters and conditions ↗
Download reference · CSV ↗

Double-lock S Couplers ↗

Model-specific source values · original fields and units retained
Complete modelSource specification snapshotDetails & download
WSQ30 ↗
SUITABLE CARRIER,T
0.8-2
REQUIRED FLOW,L/MIN
10-20
MAXIMUM OPENING(W-MAX),MM
144
Source P03 · p.9 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WSQ40 ↗
SUITABLE CARRIER,T
2-6
REQUIRED FLOW,L/MIN
10-20
MAXIMUM OPENING(W-MAX),MM
156
Source P03 · p.9 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WSQ45 ↗
SUITABLE CARRIER,T
6-11
REQUIRED FLOW,L/MIN
10-20
MAXIMUM OPENING(W-MAX),MM
226
Source P03 · p.9 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WSQ50 ↗
SUITABLE CARRIER,T
6-11
REQUIRED FLOW,L/MIN
10-20
MAXIMUM OPENING(W-MAX),MM
206
Source P03 · p.9 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WSQ60 ↗
SUITABLE CARRIER,T
11-18
REQUIRED FLOW,L/MIN
10-20
MAXIMUM OPENING(W-MAX),MM
272
Source P03 · p.9 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WSQ65 ↗
SUITABLE CARRIER,T
18-22
REQUIRED FLOW,L/MIN
10-20
MAXIMUM OPENING(W-MAX),MM
272
Source P03 · p.9 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WSQ70 ↗
SUITABLE CARRIER,T
22-30
REQUIRED FLOW,L/MIN
10-20
MAXIMUM OPENING(W-MAX),MM
364
Source P03 · p.9 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WSQ70/55 ↗
SUITABLE CARRIER,T
22-32
REQUIRED FLOW,L/MIN
10-20
MAXIMUM OPENING(W-MAX),MM
364
Source P03 · p.9 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WSQ80 ↗
SUITABLE CARRIER,T
30-40
REQUIRED FLOW,L/MIN
10-20
MAXIMUM OPENING(W-MAX),MM
470
Source P03 · p.9 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WSQ90 ↗
SUITABLE CARRIER,T
40-70
REQUIRED FLOW,L/MIN
10-20
MAXIMUM OPENING(W-MAX),MM
610
Source P03 · p.9 ↗
All parameters and conditions ↗
Download reference · CSV ↗

Tilting D Couplers ↗

Model-specific source values · original fields and units retained
Complete modelSource specification snapshotDetails & download
WTD02 ↗
SUITABLE CARRIER,T
1-2.5
CYLINDER FLOW RATE,L/MIN
10-30
SWING CYLINDER WORKING FLOW,L/MIN
2-4
Source P03 · p.10 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WTD03 ↗
SUITABLE CARRIER,T
3-4
CYLINDER FLOW RATE,L/MIN
10-30
SWING CYLINDER WORKING FLOW,L/MIN
5-16
Source P03 · p.10 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WTD04 ↗
SUITABLE CARRIER,T
5-6.5
CYLINDER FLOW RATE,L/MIN
10-30
SWING CYLINDER WORKING FLOW,L/MIN
5-16
Source P03 · p.10 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WTD05 ↗
SUITABLE CARRIER,T
7-10
CYLINDER FLOW RATE,L/MIN
10-30
SWING CYLINDER WORKING FLOW,L/MIN
15-44
Source P03 · p.10 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WTD06 ↗
SUITABLE CARRIER,T
11-17
CYLINDER FLOW RATE,L/MIN
10-30
SWING CYLINDER WORKING FLOW,L/MIN
19-58
Source P03 · p.10 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WTD08 ↗
SUITABLE CARRIER,T
18-26
CYLINDER FLOW RATE,L/MIN
10-30
SWING CYLINDER WORKING FLOW,L/MIN
35-105
Source P03 · p.10 ↗
All parameters and conditions ↗
Download reference · CSV ↗

Tilting S Couplers ↗

Model-specific source values · original fields and units retained
Complete modelSource specification snapshotDetails & download
WTS40 ↗
SUITABLE CARRIER,T
2-6
CYLINDER FLOW RATE,L/MIN
10-20
SWING CYLINDER WORKING FLOW,L/MIN
5-16
Source P03 · p.11 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WTS45 ↗
SUITABLE CARRIER,T
6-11
CYLINDER FLOW RATE,L/MIN
10-20
SWING CYLINDER WORKING FLOW,L/MIN
15-44
Source P03 · p.11 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WTS60 ↗
SUITABLE CARRIER,T
11-20
CYLINDER FLOW RATE,L/MIN
10-20
SWING CYLINDER WORKING FLOW,L/MIN
19-58
Source P03 · p.11 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WTS70 ↗
SUITABLE CARRIER,T
22-35
CYLINDER FLOW RATE,L/MIN
10-20
SWING CYLINDER WORKING FLOW,L/MIN
35-105
Source P03 · p.11 ↗
All parameters and conditions ↗
Download reference · CSV ↗

Rotating Couplers ↗

Model-specific source values · original fields and units retained
Complete modelSource specification snapshotDetails & download
WRQ02 ↗
SUITABLE CARRIER,T
2.5-4
OPERATING FLOW(MOTOR),L/MIN
40-50
OPERATING FLOW(CYLINDER),L/MIN
10-30
Source P03 · p.12 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WRQ4 ↗
SUITABLE CARRIER,T
5-7
OPERATING FLOW(MOTOR),L/MIN
60-70
OPERATING FLOW(CYLINDER),L/MIN
10-30
Source P03 · p.12 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WRQ06 ↗
SUITABLE CARRIER,T
11-15
OPERATING FLOW(MOTOR),L/MIN
60-70
OPERATING FLOW(CYLINDER),L/MIN
10-30
Source P03 · p.12 ↗
All parameters and conditions ↗
Download reference · CSV ↗

Selection and purchase guidance.

BUYING GUIDE

Quick coupler types and configuration review

The supplied WHC, WCQ, WDQ, WSQ, WTD, WTS and WRQ pages distinguish hydraulic, cast, double-lock, tilting and rotating types. Rotation and tilt are different functions; a rotating quick coupler is not automatically a tiltrotator.

Read the guide →

BUYING GUIDE

How to prepare quick coupler measurements

The pre-order form identifies front and rear pin diameters A1/A2, centre distance B and widths C1/C2. Record what each width measures, include units and attach labelled photographs or a drawing.

Read the guide →

BUYING GUIDE

What to include in an attachment quotation request

The supplied order process covers customer identity, machine brand/model/year, installation dimensions/oil ports, working conditions, function/specification and a completeness check.

Read the guide →

BUYING GUIDE

Machine and attachment compatibility information

Provide exact brand, model and year, working weight and available machine documents. Add serial information when needed for configuration review.

Read the guide →

BUYING GUIDE

Read the quick coupler warranty by component

The supplied quick-coupler matrix distinguishes body, hydraulic lock, cylinder, valve, pins, hoses and switch. Standard and rotating arrangements have different conditions.

Read the guide →

BUYING GUIDE

Rotating vs tilting couplers: choose the movement you need

A rotary coupler changes the tool orientation through the 360-degree rotation described in the R-series source. A tilting coupler changes the tool angle within its model-specific tilt range. These are different motions; neither label alone establishes a tiltrotator.

Read the guide →

BUYING GUIDE

Prepare a multi-attachment fleet compatibility record

Record exact model/year, machine weight, available interface drawings and hydraulic circuit information. Group by confirmed configuration rather than tonne class alone.

Read the guide →

Keep the source with the model.

PDF · 12 PAGES

Quick Coupler Selection Guide

View the original pages and retain the relevant version with your enquiry.

PDF · 48 PAGES

Excavator Attachment Catalogue

View the original pages and retain the relevant version with your enquiry.

Questions before choosing.

What information should I prepare for this category?

Machine-side and tool-side pin diameters, centre distances and inside widths; locking layout; hydraulic circuit.

How do I compare the types before picking a model?

Use the function comparison above to identify the work stage, then open the relevant type to compare its complete source-listed models and parameters.

Does a catalogue model establish compatibility with my machine?

Keep the exact machine, upper/lower interface and any hydraulic or connected-tool requirements with the selected model. Confirm the actual proposed configuration and current documents.

Turn your job into a defined requirement.

Start with the material and machine, add a type or model if known, and keep the conditions with your enquiry.

CONTINUE YOUR REVIEW

Related information for your next decision

Discuss your machine, application and configuration →

What do you need to do?

Start with part of a model or describe the job. Suggested results are for selection review.