Excavator attachment supply · Ningbo, China Search · FAQ · Support · Market / EnglishWhatsApp +86 15058273161
WE-ATTACH

Quick Couplers

Mechanical Quick Couplers

Configuration-led product type

Change excavator tools with a mechanically secured coupler configuration.

Separate the locking/operation method and interfaces from the hydraulic-coupler circuit request.

Model-specific product viewAsk for the configuration drawing
WE-ATTACH brand mark. An exact mechanical-coupler product image is not identified in the supplied set.

FROM AN IDEA TO A REQUIREMENT

What to specify for this attachment

Use these decisions to turn the work requirement into a model and configuration enquiry.

Information to carry into the review
DecisionWhy it mattersInformation to provide
Required movementChanging a tool, tilting it and rotating it are separate functions.The intended tool and movement, with the required angle/clearance.
Upper and lower interfacesA model name or machine class does not define the complete connection.Machine identity, pin diameter, centres, inside width and existing tool interface.
Hydraulic connectionsLocking, rotation or tilt may have separate requirements from the connected tool.Available circuits, flow, pressure, return and required hose arrangement.
Installation informationThe final arrangement must retain the applicable locking and operating information.Current mounting drawing, full model/suffix and the intended attachment.

Structure and functions in the supplied material

The source lists a mechanical option alongside hydraulic, double-lock, tilting and rotating types.

Models and parameter comparison

This supplied product type now has its own detail page. The available material does not identify a complete orderable model or parameter table; no model code or specification is created from its photograph.

Send the machine and task information below so the exact model/configuration can be identified.

Tasks, applications and buyer value

Separate the locking/operation method and interfaces from the hydraulic-coupler circuit request.

Selection inputs and applicable conditions

Both interfaces; locking and verification method; machine/tool drawings; requested documents.

No mechanical model, locking procedure or hydraulic parameter is invented; the photograph is a quick-coupler family reference.

Plan the work around the attachment

  1. Start with the tool connection

    Record pin diameters, centres, inside width and the intended tool interface. Identify the existing standard and its revision instead of relying on a similar name.

  2. Choose the movement your job needs

    A fixed coupler changes the tool connection; a tilting coupler adds tilt; a rotary coupler adds rotation. Compare those functions separately against the task and available clearance.

  3. Confirm the installed configuration

    Keep the locking method, hydraulic connections, installation drawing and applicable operating instructions with the proposed model. Separate the connected tool circuit from coupler actuation.

Available information and source documents

The supplied family material supports this type entry. Complete order configuration, current drawing and applicable operation documents remain part of the model review.

Selection and purchase guidance

Where this tool fits in the work.

Questions specific to this type

What should I compare before choosing Mechanical Quick Couplers?

Both interfaces; locking and verification method; machine/tool drawings; requested documents.

Which limits remain important for the purchase?

No mechanical model, locking procedure or hydraulic parameter is invented; the photograph is a quick-coupler family reference.

CONTINUE YOUR REVIEW

Related information for your next decision

Discuss your machine, application and configuration →

What do you need to do?

Start with part of a model or describe the job. Suggested results are for selection review.