FROM AN IDEA TO A REQUIREMENT
What to specify for this attachment
Use these decisions to turn the work requirement into a model and configuration enquiry.
| Decision | Why it matters | Information to provide |
|---|---|---|
| Required movement | Changing a tool, tilting it and rotating it are separate functions. | The intended tool and movement, with the required angle/clearance. |
| Upper and lower interfaces | A model name or machine class does not define the complete connection. | Machine identity, pin diameter, centres, inside width and existing tool interface. |
| Hydraulic connections | Locking, rotation or tilt may have separate requirements from the connected tool. | Available circuits, flow, pressure, return and required hose arrangement. |
| Installation information | The final arrangement must retain the applicable locking and operating information. | Current mounting drawing, full model/suffix and the intended attachment. |
Structure and functions in the supplied material
The WHC quick-coupler arrangement places the tool connection below the excavator mounting. Pin diameter, centre distance and arm-width ranges define the connections to compare. The pressure and flow values refer to the coupler actuation circuit; they do not establish the requirements of a powered attachment connected below it.
Models and parameter comparison
| Parameter | WHC01 ↗ | WHC02 ↗ | WHC03 ↗ | WHC04 ↗ | WHC06 ↗ | WHC08 ↗ | WHC10 ↗ | WHC14 ↗ | WHC17 ↗ |
|---|---|---|---|---|---|---|---|---|---|
| LENGTH(L),MM | 370-420 | 400-450 | 550-590 | 610-650 | 800-860 | Source / configuration confirmation needed | Source / configuration confirmation needed | Source / configuration confirmation needed | Source / configuration confirmation needed |
| HEIGHT(H),MM | 255-300 | 230-280 | 300-380 | 310-390 | 415-510 | 500-580 | 550-615 | 575-650 | 600-660 |
| WIDTH(W),MM | 150-200 | 210-250 | 240-310 | 300-390 | 360-420 | 450-560 | 530-640 | 580-650 | 630-700 |
| PIN CENTER(C),MM | 85-180 | 170-245 | 245-300 | 290-360 | 350-420 | 400-510 | 500-580 | 570-600 | 590-650 |
| ARM WIDTH(W1),MM | 90-120 | 110-160 | 150-230 | 220-280 | 250-320 | 300-390 | 350-420 | 400-450 | 450-500 |
| PIN DIAMETER(ØD),MM | Ø25-Ø30 | Ø30-Ø40 | Ø40-Ø50 | Ø50-Ø60 | Ø60-Ø70 | Ø80-Ø90 | Ø90-Ø100 | Ø100-Ø110 | Ø110-Ø130 |
| OPERATING PRESSURE,BAR | 30-150 | 30-150 | 30-150 | 30-150 | 30-150 | 30-200 | 30-200 | 30-200 | 30-200 |
| OIL FLOW RANGE,L/MIN | 10-30 | 10-30 | 10-30 | 10-30 | 10-30 | 10-30 | 10-30 | 10-30 | 10-30 |
| WEIGHT,KG | 20-30 | 35-50 | 60-80 | 90-120 | 200-260 | 340-380 | 530-580 | 700-760 | 750-850 |
| SUITABLE CARRIER,T | 1-2 | 2.5-4 | 5-6 | 7-10 | 11-17 | 18-25 | 25-36 | 36-45 | 45-55 |
| LENGTH(L),MM | Source / configuration confirmation needed | Source / configuration confirmation needed | Source / configuration confirmation needed | Source / configuration confirmation needed | Source / configuration confirmation needed | 1000-1050 | 1080-1150 | 1150-1250 | 1250-1350 |
Tasks, applications and buyer value
For a fleet using several tools, one defined machine-side and tool-side interface provides a clear basis for checking each proposed tool connection.
Selection inputs and applicable conditions
Pin diameters at both connections; centre distances; inside widths; locking configuration; hydraulic circuit.
Confirm the locking arrangement and operating/verification instructions for the complete ordered configuration. A dimension range does not prove a match to every machine in the listed tonne class.
Plan the work around the attachment
Start with the tool connection
Record pin diameters, centres, inside width and the intended tool interface. Identify the existing standard and its revision instead of relying on a similar name.
Choose the movement your job needs
A fixed coupler changes the tool connection; a tilting coupler adds tilt; a rotary coupler adds rotation. Compare those functions separately against the task and available clearance.
Confirm the installed configuration
Keep the locking method, hydraulic connections, installation drawing and applicable operating instructions with the proposed model. Separate the connected tool circuit from coupler actuation.
Available information and source documents
The supplied family material supports this type entry. Complete order configuration, current drawing and applicable operation documents remain part of the model review.
Selection and purchase guidance
Where this tool fits in the work.
Questions specific to this type
What should I compare before choosing Hydraulic Quick Couplers?
Pin diameters at both connections; centre distances; inside widths; locking configuration; hydraulic circuit.
Which limits remain important for the purchase?
Confirm the locking arrangement and operating/verification instructions for the complete ordered configuration. A dimension range does not prove a match to every machine in the listed tonne class.
