Excavator attachment supply · Ningbo, China Search · FAQ · Support · Market / EnglishWhatsApp +86 15058273161
WE-ATTACH

Quick Couplers

Cast Quick Couplers

2 catalogue models

Connect excavator tools using the WCQ cast-body quick-coupler arrangement.

Compare the body construction and connection envelope against the machine and the tools already in your fleet.

Supplied product-type image; confirm the exact ordered configuration.

FROM AN IDEA TO A REQUIREMENT

What to specify for this attachment

Use these decisions to turn the work requirement into a model and configuration enquiry.

Information to carry into the review
DecisionWhy it mattersInformation to provide
Required movementChanging a tool, tilting it and rotating it are separate functions.The intended tool and movement, with the required angle/clearance.
Upper and lower interfacesA model name or machine class does not define the complete connection.Machine identity, pin diameter, centres, inside width and existing tool interface.
Hydraulic connectionsLocking, rotation or tilt may have separate requirements from the connected tool.Available circuits, flow, pressure, return and required hose arrangement.
Installation informationThe final arrangement must retain the applicable locking and operating information.Current mounting drawing, full model/suffix and the intended attachment.

Structure and functions in the supplied material

The WCQ design is described with an integral cast body, a load-bearing lower plate, an extended movable jaw and an anti-drop mechanism. Compare that cast construction with the welded D-type arrangement, then confirm the locking details and mounting dimensions of the quoted model.

Models and parameter comparison

Source model data · units retained · exact configuration requires review
ParameterWCQ06 ↗WCQ08 ↗
LENGTH,MM9301052
L1,MM375470
ØD,MM6580
L2,MM345-400425-505
W1,MM216-260302-327
W2,MM216-260302-327
H,MM443541

Tasks, applications and buyer value

Compare the body construction and connection envelope against the machine and the tools already in your fleet.

Selection inputs and applicable conditions

Length, L1/L2, widths, pin diameter, body height, locking method and machine/tool drawings.

Do not substitute the WCQ drawing for a welded or double-lock model. Confirm the exact pin geometry and locking instructions.

Plan the work around the attachment

  1. Start with the tool connection

    Record pin diameters, centres, inside width and the intended tool interface. Identify the existing standard and its revision instead of relying on a similar name.

  2. Choose the movement your job needs

    A fixed coupler changes the tool connection; a tilting coupler adds tilt; a rotary coupler adds rotation. Compare those functions separately against the task and available clearance.

  3. Confirm the installed configuration

    Keep the locking method, hydraulic connections, installation drawing and applicable operating instructions with the proposed model. Separate the connected tool circuit from coupler actuation.

Available information and source documents

The supplied family material supports this type entry. Complete order configuration, current drawing and applicable operation documents remain part of the model review.

Selection and purchase guidance

Where this tool fits in the work.

Questions specific to this type

What should I compare before choosing Cast Quick Couplers?

Length, L1/L2, widths, pin diameter, body height, locking method and machine/tool drawings.

Which limits remain important for the purchase?

Do not substitute the WCQ drawing for a welded or double-lock model. Confirm the exact pin geometry and locking instructions.

CONTINUE YOUR REVIEW

Related information for your next decision

Discuss your machine, application and configuration →

What do you need to do?

Start with part of a model or describe the job. Suggested results are for selection review.