Excavator attachment supply · Ningbo, China Search · FAQ · Support · Market / EnglishWhatsApp +86 15058273161
WE-ATTACH

WE-ATTACH / EXCAVATOR ATTACHMENTS

Buyer FAQ

Source-led catalogue information and purchasing pathways.

Q01 What excavator attachment is suitable for my job?

Define the job and material first, then review the product family, exact model/configuration, machine interface and hydraulic circuit. Use the related application and selection pages to prepare missing information; catalogue carrier classes and photographs alone do not establish fitment or performance.

Read the related selection information ↗

Reviewed: 2026-11-16

Continue to the relevant page ↗
Q02 Which attachment is suitable for sorting mixed demolition materials?

Define the job and material first, then review the product family, exact model/configuration, machine interface and hydraulic circuit. Use the related application and selection pages to prepare missing information; catalogue carrier classes and photographs alone do not establish fitment or performance.

Read the related selection information ↗

Reviewed: 2026-11-16

Continue to the relevant page ↗
Q03 What information is needed before choosing an excavator auger drive for a drilling job?

Record the required hole diameter/depth, ground description, obstructions, machine and work arrangement. The soft/medium/hard descriptions in the brochure are reference categories, not a measured geotechnical specification. Review output shaft, mounting, auger, extension and teeth together. The selection guide contains drive pages followed by ground-tool and wear-part pages.

Read the related selection information ↗

Reviewed: 2026-11-16

Continue to the relevant page ↗
Q04 Which type of excavator grapple is suitable for timber, rock or scrap handling?

Separate wood/stone, logs, scrap and loose bulk material. Describe piece shape, size, density and handling method rather than selecting from the product photograph alone. Compare opening, attachment weight, geometry and the stated capacity/load definition. Confirm the machine operating envelope and any lifting conditions for the project.

Read the related selection information ↗

Reviewed: 2026-11-16

Continue to the relevant page ↗
Q06 When does a quick coupler make sense for a multi-attachment excavator fleet?

Define the job and material first, then review the product family, exact model/configuration, machine interface and hydraulic circuit. Use the related application and selection pages to prepare missing information; catalogue carrier classes and photographs alone do not establish fitment or performance.

Read the related selection information ↗

Reviewed: 2026-11-16

Continue to the relevant page ↗
Q07 What is the difference between hydraulic and mechanical excavator quick couplers?

The supplied WHC, WCQ, WDQ, WSQ, WTD, WTS and WRQ pages distinguish hydraulic, cast, double-lock, tilting and rotating types. Rotation and tilt are different functions; a rotating quick coupler is not automatically a tiltrotator. Read machine-side and attachment-side dimensions together. Identify the locking arrangement and required control circuit before comparing two models.

Read the related selection information ↗

Reviewed: 2026-11-16

Continue to the relevant page ↗
Q08 Will this quick coupler fit my excavator?

Provide exact brand, model and year, working weight and available machine documents. Add serial information when needed for configuration review. Provide pin/centre/width measurements with units and circuit flow, pressure and return conditions. A common trade name or similar model number does not prove compatibility.

Read the related selection information ↗

Reviewed: 2026-11-16

Continue to the relevant page ↗
Q09 Which dimensions should I measure for an excavator quick coupler?

The pre-order form identifies front and rear pin diameters A1/A2, centre distance B and widths C1/C2. Record what each width measures, include units and attach labelled photographs or a drawing. Record the machine connection and the tool-side connection separately. A matching excavator tonne class does not establish either interface.

Read the related selection information ↗

Reviewed: 2026-11-16

Continue to the relevant page ↗
Q11 What is the difference between a rotating quick coupler, a tilting quick coupler and a tiltrotator?

The supplied WHC, WCQ, WDQ, WSQ, WTD, WTS and WRQ pages distinguish hydraulic, cast, double-lock, tilting and rotating types. Rotation and tilt are different functions; a rotating quick coupler is not automatically a tiltrotator. Read machine-side and attachment-side dimensions together. Identify the locking arrangement and required control circuit before comparing two models.

Read the related selection information ↗

Reviewed: 2026-11-16

Continue to the relevant page ↗
Q12 What hydraulic flow and pressure does this quick coupler require?

Provide exact brand, model and year, working weight and available machine documents. Add serial information when needed for configuration review. Provide pin/centre/width measurements with units and circuit flow, pressure and return conditions. A common trade name or similar model number does not prove compatibility.

Read the related selection information ↗

Reviewed: 2026-11-16

Continue to the relevant page ↗
Q13 How do I select an excavator auger drive for my carrier and ground conditions?

Record the required hole diameter/depth, ground description, obstructions, machine and work arrangement. The soft/medium/hard descriptions in the brochure are reference categories, not a measured geotechnical specification. Review output shaft, mounting, auger, extension and teeth together. The selection guide contains drive pages followed by ground-tool and wear-part pages.

Read the related selection information ↗

Reviewed: 2026-11-16

Continue to the relevant page ↗
Q14 How do soil conditions, hole diameter and drilling depth affect auger selection?

Record the required hole diameter/depth, ground description, obstructions, machine and work arrangement. The soft/medium/hard descriptions in the brochure are reference categories, not a measured geotechnical specification. Review output shaft, mounting, auger, extension and teeth together. The selection guide contains drive pages followed by ground-tool and wear-part pages.

Read the related selection information ↗

Reviewed: 2026-11-16

Continue to the relevant page ↗
Q15 Which auger bit, extension or teeth do I need for my auger drive?

Record the required hole diameter/depth, ground description, obstructions, machine and work arrangement. The soft/medium/hard descriptions in the brochure are reference categories, not a measured geotechnical specification. Review output shaft, mounting, auger, extension and teeth together. The selection guide contains drive pages followed by ground-tool and wear-part pages.

Read the related selection information ↗

Reviewed: 2026-11-16

Continue to the relevant page ↗
Q16 How do I choose between a hydraulic shear and a pulverizer?

The supplied catalogue separates steel shears, eagle shears, CR/CC crushers, dismantling shears, fixed/rotating pulverizers and a magnet-equipped type. State the material and desired processing result. Record attachment position, machine reach/stability and cylinder/rotation circuit requirements. Compare opening, force definition and geometry only when the source/model correspondence is clear.

Read the related selection information ↗

Reviewed: 2026-11-16

Continue to the relevant page ↗
Q18 What grapple opening, capacity and load information should I check?

Separate wood/stone, logs, scrap and loose bulk material. Describe piece shape, size, density and handling method rather than selecting from the product photograph alone. Compare opening, attachment weight, geometry and the stated capacity/load definition. Confirm the machine operating envelope and any lifting conditions for the project.

Read the related selection information ↗

Reviewed: 2026-11-16

Continue to the relevant page ↗
Q19 How do I select an excavator hydraulic breaker for my machine and material?

The supplied material separates light, medium, heavy and fully hydraulic breaker references and side/top/box dimensions. Compare the same housing, bracket and tool arrangement. Record model/year, flow, pressure, return conditions, material, tool diameter and expected work pattern. Tool and wear-part selection remains model-specific.

Read the related selection information ↗

Reviewed: 2026-11-16

Continue to the relevant page ↗
Q20 Which breaker tool and wear parts are required for this breaker model?

Use the full model/suffix and order or serial reference to identify the applicable drawing, parts and operating information. Document availability must be checked by model and revision. A catalogue or another product’s certificate does not replace an approved operation manual. For service, include dates, hours, maintenance and photographs.

Read the related selection information ↗

Reviewed: 2026-11-16

Continue to the relevant page ↗
Q21 How do I choose an excavator bucket by width, capacity and material density?

Crushing, screening, clamshell handling, cleaning and digging are different tasks. Supplied image families also include tilt, rock and multi-purpose configurations. Prepare width/opening, capacity definition, material density, cutting edge or teeth, interface and auxiliary circuit where relevant. A photo does not establish load rating or volume.

Read the related selection information ↗

Reviewed: 2026-11-16

Continue to the relevant page ↗
Q22 What should I check before selecting an excavator-mounted plate compactor?

Record compaction location, material, working area, access and the required project outcome. Catalogue compaction claims are not treated as verified site results. Provide reach, mounting, circuit information and the proposed configuration. WVC and WEC references are separate series.

Read the related selection information ↗

Reviewed: 2026-11-16

Continue to the relevant page ↗
Q23 What information is needed to select an excavator-mounted pile driver?

Provide pile material, section/diameter, length, proposed clamp and site arrangement. Record machine identity, reach, hydraulic circuit and the intended working position. A catalogue carrier class is not a site stability approval.

Read the related selection information ↗

Reviewed: 2026-11-16

Continue to the relevant page ↗
Q24 Will a hydraulic thumb work with my bucket and excavator geometry?

Provide exact brand, model and year, working weight and available machine documents. Add serial information when needed for configuration review. Provide pin/centre/width measurements with units and circuit flow, pressure and return conditions. A common trade name or similar model number does not prove compatibility.

Read the related selection information ↗

Reviewed: 2026-11-16

Continue to the relevant page ↗
Q26 What should I compare when evaluating excavator attachment suppliers?

WE-ATTACH connects attachment selection, configuration requirements and coordinated supply, supported by our warehouse and hillside testing site. Core manufacturing partners produce our attachments. Manufacturing facilities, staff and certificates must be attributed to the responsible partner and the applicable product. Define the product/drawing revision, target market, quality responsibilities, quantity and required evidence for the proposed project. Confirm commercial and manufacturing responsibilities in writing.

Read the related selection information ↗

Reviewed: 2026-11-16

Continue to the relevant page ↗
Q27 What information should an OEM buyer review before approving an attachment supplier?

WE-ATTACH connects attachment selection, configuration requirements and coordinated supply, supported by our warehouse and hillside testing site. Core manufacturing partners produce our attachments. Manufacturing facilities, staff and certificates must be attributed to the responsible partner and the applicable product. Define the product/drawing revision, target market, quality responsibilities, quantity and required evidence for the proposed project. Confirm commercial and manufacturing responsibilities in writing.

Read the related selection information ↗

Reviewed: 2026-11-16

Continue to the relevant page ↗
Q28 Can WE-ATTACH support OEM, private-label or custom attachment projects?

WE-ATTACH connects attachment selection, configuration requirements and coordinated supply, supported by our warehouse and hillside testing site. Core manufacturing partners produce our attachments. Manufacturing facilities, staff and certificates must be attributed to the responsible partner and the applicable product. Define the product/drawing revision, target market, quality responsibilities, quantity and required evidence for the proposed project. Confirm commercial and manufacturing responsibilities in writing.

Read the related selection information ↗

Reviewed: 2026-11-16

Continue to the relevant page ↗
Q29 What is included in the quoted excavator attachment configuration?

The supplied order process covers customer identity, machine brand/model/year, installation dimensions/oil ports, working conditions, function/specification and a completeness check. Record full model/suffix, drawing revision, mounting, tooling, hoses, accessories, exclusions, quantity and destination. Confirm packaging, delivery and responsibility in the actual quotation.

Read the related selection information ↗

Reviewed: 2026-11-16

Continue to the relevant page ↗
Q30 What is the MOQ for this attachment and configuration?

The supplied order process covers customer identity, machine brand/model/year, installation dimensions/oil ports, working conditions, function/specification and a completeness check. Record full model/suffix, drawing revision, mounting, tooling, hoses, accessories, exclusions, quantity and destination. Confirm packaging, delivery and responsibility in the actual quotation.

Read the related selection information ↗

Reviewed: 2026-11-16

Continue to the relevant page ↗
Q31 What is the lead time for this model and order quantity?

The supplied order process covers customer identity, machine brand/model/year, installation dimensions/oil ports, working conditions, function/specification and a completeness check. Record full model/suffix, drawing revision, mounting, tooling, hoses, accessories, exclusions, quantity and destination. Confirm packaging, delivery and responsibility in the actual quotation.

Read the related selection information ↗

Reviewed: 2026-11-16

Continue to the relevant page ↗
Q32 Which technical and quality documents can you provide for this model?

Use the full model/suffix and order or serial reference to identify the applicable drawing, parts and operating information. Document availability must be checked by model and revision. A catalogue or another product’s certificate does not replace an approved operation manual. For service, include dates, hours, maintenance and photographs.

Read the related selection information ↗

Reviewed: 2026-11-16

Continue to the relevant page ↗
Q33 Can you provide dealer pricing and regional distribution support?

MOQ, lead time, trial configuration, pricing and distribution terms depend on the actual model, quantity, territory and written quotation. The supplied sales script contains examples, not an approved company-wide promise. Send the specific requirement for review.

Read the related selection information ↗

Reviewed: 2026-11-16

Continue to the relevant page ↗
Q34 How can I verify that the attachment is compatible with my machine?

Provide exact brand, model and year, working weight and available machine documents. Add serial information when needed for configuration review. Provide pin/centre/width measurements with units and circuit flow, pressure and return conditions. A common trade name or similar model number does not prove compatibility.

Read the related selection information ↗

Reviewed: 2026-11-16

Continue to the relevant page ↗
Q40 What spare parts and after-sales support are available for this model?

Use the full model/suffix and order or serial reference to identify the applicable drawing, parts and operating information. Document availability must be checked by model and revision. A catalogue or another product’s certificate does not replace an approved operation manual. For service, include dates, hours, maintenance and photographs.

Read the related selection information ↗

Reviewed: 2026-11-16

Continue to the relevant page ↗
Q41 How are packaging, shipping and delivery responsibilities defined?

The supplied order process covers customer identity, machine brand/model/year, installation dimensions/oil ports, working conditions, function/specification and a completeness check. Record full model/suffix, drawing revision, mounting, tooling, hoses, accessories, exclusions, quantity and destination. Confirm packaging, delivery and responsibility in the actual quotation.

Read the related selection information ↗

Reviewed: 2026-11-16

Continue to the relevant page ↗
Q42 What information should I include in a request for quotation for an excavator quick coupler?

Provide company/contact, exact model and configuration, machine brand/model/year, interface measurements and hydraulic data with units, material/work conditions, quantity and destination. State included mounting, tooling, accessories, exclusions and drawing revision. Keep unresolved points with the quotation.

Read the related selection information ↗

Reviewed: 2026-11-16

Continue to the relevant page ↗
Q43 What information should I provide when requesting an excavator auger drive quotation?

Provide company/contact, exact model and configuration, machine brand/model/year, interface measurements and hydraulic data with units, material/work conditions, quantity and destination. State included mounting, tooling, accessories, exclusions and drawing revision. Keep unresolved points with the quotation.

Read the related selection information ↗

Reviewed: 2026-11-16

Continue to the relevant page ↗
Q44 What information should I provide for a hydraulic breaker quotation?

Provide company/contact, exact model and configuration, machine brand/model/year, interface measurements and hydraulic data with units, material/work conditions, quantity and destination. State included mounting, tooling, accessories, exclusions and drawing revision. Keep unresolved points with the quotation.

Read the related selection information ↗

Reviewed: 2026-11-16

Continue to the relevant page ↗
Q45 What information is required for an OEM attachment project inquiry?

WE-ATTACH connects attachment selection, configuration requirements and coordinated supply, supported by our warehouse and hillside testing site. Core manufacturing partners produce our attachments. Manufacturing facilities, staff and certificates must be attributed to the responsible partner and the applicable product. Define the product/drawing revision, target market, quality responsibilities, quantity and required evidence for the proposed project. Confirm commercial and manufacturing responsibilities in writing.

Read the related selection information ↗

Reviewed: 2026-11-16

Continue to the relevant page ↗
Q46 What information is needed to discuss an excavator attachment distributorship?

WE-ATTACH connects attachment selection, configuration requirements and coordinated supply, supported by our warehouse and hillside testing site. Core manufacturing partners produce our attachments. Manufacturing facilities, staff and certificates must be attributed to the responsible partner and the applicable product. Define the product/drawing revision, target market, quality responsibilities, quantity and required evidence for the proposed project. Confirm commercial and manufacturing responsibilities in writing.

Read the related selection information ↗

Reviewed: 2026-11-16

Continue to the relevant page ↗
Q47 Can I start with a trial order or sample configuration?

The supplied order process covers customer identity, machine brand/model/year, installation dimensions/oil ports, working conditions, function/specification and a completeness check. Record full model/suffix, drawing revision, mounting, tooling, hoses, accessories, exclusions, quantity and destination. Confirm packaging, delivery and responsibility in the actual quotation.

Read the related selection information ↗

Reviewed: 2026-11-16

Continue to the relevant page ↗
Q48 How can I make sure the quotation covers the correct model and configuration?

The supplied order process covers customer identity, machine brand/model/year, installation dimensions/oil ports, working conditions, function/specification and a completeness check. Record full model/suffix, drawing revision, mounting, tooling, hoses, accessories, exclusions, quantity and destination. Confirm packaging, delivery and responsibility in the actual quotation.

Read the related selection information ↗

Reviewed: 2026-11-16

Continue to the relevant page ↗
Q49 How do I identify the correct spare part for my attachment?

Use the full model/suffix and order or serial reference to identify the applicable drawing, parts and operating information. Document availability must be checked by model and revision. A catalogue or another product’s certificate does not replace an approved operation manual. For service, include dates, hours, maintenance and photographs.

Read the related selection information ↗

Reviewed: 2026-11-16

Continue to the relevant page ↗
Q50 Where can I find the installation, operation and maintenance instructions for my model?

Use the full model/suffix and order or serial reference to identify the applicable drawing, parts and operating information. Document availability must be checked by model and revision. A catalogue or another product’s certificate does not replace an approved operation manual. For service, include dates, hours, maintenance and photographs.

Read the related selection information ↗

Reviewed: 2026-11-16

Continue to the relevant page ↗
Q51 What information is required to submit a warranty or service request?

Use the full model/suffix and order or serial reference to identify the applicable drawing, parts and operating information. Document availability must be checked by model and revision. A catalogue or another product’s certificate does not replace an approved operation manual. For service, include dates, hours, maintenance and photographs.

Read the related selection information ↗

Reviewed: 2026-11-16

Continue to the relevant page ↗

What do you need to do?

Start with part of a model or describe the job. Suggested results are for selection review.