WE-ATTACH source-led buying guide · Updated 2026-11-17 · Project and technical approval are separate from this guide.

This guide organizes the supplied WE-ATTACH material into an information checklist for the proposed purchase. It does not replace the model-specific approved drawing or operation instructions.
Start with the hole and ground
Record the required hole diameter/depth, ground description, obstructions, machine and work arrangement. The soft/medium/hard descriptions in the brochure are reference categories, not a measured geotechnical specification.
Connect drive and tooling
Review output shaft, mounting, auger, extension and teeth together. The selection guide contains drive pages followed by ground-tool and wear-part pages.
Read maximum values carefully
Torque, flow, pressure, speed and reference drilling depths need their test conditions. Maximum values printed separately do not establish one operating point. WD5 diameter and reference depths differ between the guide and the full catalogue; confirm an approved revision before order.
Information to send next
Carrier, available flow/pressure, output shaft, mounting arrangement, ground, hole diameter and depth. Include quantities, destination, available drawings and the unresolved questions.
Supply and evidence responsibility
WE-ATTACH connects attachment selection, configuration requirements and coordinated supply, supported by our warehouse and hillside testing site. Core manufacturing partners produce our attachments. Manufacturing facilities, staff and certificates must be attributed to the responsible partner and the applicable product.
Source and document traceability
Catalogue transcription for preliminary review. Confirm the applicable configuration and current approved revision before order.
- Auger Drive Selection Guide ↗ · PDF physical page 6
- Excavator Attachment Catalogue ↗ · PDF physical page 4
