FROM AN IDEA TO A REQUIREMENT
What to specify for this attachment
Use these decisions to turn the work requirement into a model and configuration enquiry.
| Decision | Why it matters | Information to provide |
|---|---|---|
| Hole and ground | The same nominal hole can need different tooling in different ground. | Diameter, depth, ground description and the required result. |
| Drive and shaft | The drive output and the tooling connection belong in one configuration. | Machine flow/pressure, output shaft and mounting information. |
| Auger string | Drive, auger, extension, teeth and pilot are separate specification items. | The intended tooling, any extension and wear-part identification. |
| Reference performance | Source depth/torque values retain their conditions and version. | The exact model, source page and any unresolved data difference. |
View the supplied catalogue drawing and original technical page
Supplier-provided catalogue reference · P03 physical page 4. Check the exact model header, configuration and source version. This excerpt is not a substitute for the current approved installation drawing or a model-specific test report.

Catalogue specifications and source
| Field | Catalogue reference | Source physical page |
|---|---|---|
| Model | WD2 | P03 · p.4 ↗ |
| WEIGHT OF CARRIER,T | 1-2.5 | P03 · p.4 ↗ |
| MAX. TORQUE, NM | 2180 | P03 · p.4 ↗ |
| OIL PRESSURE, BAR | 70-240 | P03 · p.4 ↗ |
| OIL FLOW,L/MIN | 25-57 | P03 · p.4 ↗ |
| UNIT HEIGHT, MM | 585 | P03 · p.4 ↗ |
| UNIT DIAMETER, MM | 200 | P03 · p.4 ↗ |
| UNIT WEIGHT, KG | 47 | P03 · p.4 ↗ |
| OUTPUT SHAFT, MM | ROUND D65 | P03 · p.4 ↗ |
| MAX. OUTPUT SPEED, RPM | 99 | P02 · p.4 ↗ |
| AUGER DIAMETER REFERENCE, MM | 100-450 | P02 · p.4 ↗ |
Drawing letters such as A/B refer to the original drawing keys; verify dimensions and units with the current model drawing.
Purpose and task
WD2 is a hydraulic auger drive for rotating a separately specified auger during hole drilling. The supplied WD2 guide identifies a 1-2.5 t carrier reference and a 100-450 mm auger-diameter reference. Select the drive, hitch, auger, teeth and any extension as one documented drilling configuration.
The drive unit is one part of that configuration. A carrier-weight class or a similar-looking mounting does not establish that a particular excavator and auger can be connected.
How this helps your buying decision
Start with the hole diameter, required depth, ground description and the actual machine. Compare those requirements with the WD2 source data before comparing price or selecting accessories.
For construction, infrastructure, post-hole or planting requirements, describe the ground, access and required result. The linked application pages are selection pathways, not verified customer projects or a promise of performance in every soil.
Model and configuration
The P03 catalogue, physical PDF page 4, lists WD2 with a 1-2.5 t carrier reference, maximum torque of 2,180 Nm, hydraulic pressure of 70-240 bar and flow of 25-57 L/min. It records a unit height of 585 mm, unit diameter of 200 mm, unit weight of 47 kg and a 65 mm round output shaft.
P02, physical PDF page 4, also lists a maximum output speed of 99 rpm and an auger-diameter reference of 100-450 mm. These are source-listed reference values. The supplied pages do not establish that every maximum occurs at the same operating point, and the unit weight does not define the complete installed drilling-package weight.
Machine and interface review
Provide the machine manufacturer, exact model and operating weight. Confirm the mounting-pin dimensions, pin centres, inside width, available movement and clearance against the proposed hitch drawing.
The WD2 guide depicts single-pin, double-pin and cradle double-pin hitch arrangements. Those illustrations identify configurations to discuss; they do not establish what is included in a quotation. The stated 65 mm round output shaft does not, by itself, define every auger connection, retaining detail or accessory fit.
Hydraulic and operating conditions
The WD2 catalogue lists 70-240 bar and 25-57 L/min. Check the actual machine circuit, available flow at the intended settings, pressure, return and back-pressure requirements, couplings and hose arrangement for the proposed configuration.
P02 lists 99 rpm as a maximum output-speed reference. A full speed/torque curve, duty-cycle limit and machine-specific hydraulic approval are not supplied on these two pages. Do not treat the separate catalogue maxima as an approved continuous-duty operating condition.
Structure and differences
The supplied auger-drive catalogue describes a hydraulic motor and planetary gearbox arrangement. The output shaft connects the drive to the separately specified ground tool. Use the documented shaft, mounting and auger details to distinguish the proposed WD2 assembly from other sizes in the family.
The Auger Drives series page provides the other source-listed model references for comparison. A higher torque figure or a different carrier-weight reference does not establish that another model will fit the same machine or ground tool.
WD2 or WD3? P03 physical PDF page 4 lists WD2 at 2,180 Nm maximum torque, 25-57 L/min flow, 47 kg unit weight and a 1-2.5 t carrier reference. The WD3 column lists 2,870 Nm, 27-75 L/min, 71 kg and a 2-4 t carrier reference. Both columns specify a 65 mm round output shaft. These catalogue references help you compare circuit demand and attachment mass; a shared shaft size or an overlapping carrier range does not prove interchangeable mounting, tooling or performance.
Use the WD3 model link in the comparison panel to inspect its own record and source differences. Then use the auger-selection guide to review the complete drive, mounting and ground-tool arrangement before sending your machine, circuit, hole and ground requirements. Keep the unresolved WD2 depth references with that enquiry.
Application boundaries
The P02 WD2 table separates soft, medium and hard ground. These brochure categories are not a geotechnical classification or a guarantee that the drive can penetrate any material described with the same words. Provide a ground description and any available site information before confirming tooling and depth.
For a 450 mm auger in medium ground, P02 physical page 4 states 1.1 m while P03 physical page 4 states 1 m. Both descriptions remain visible in the source-variant comparison. Neither value is promoted to one approved drilling-depth commitment. Confirm the applicable source revision, tool and project conditions.
Manufacturing and quality responsibility
WE-ATTACH supplies through core manufacturing partners and operates a warehouse and hillside testing site. Ask for the manufacturer, model/configuration and scope on the applicable inspection, material or compliance record. A facility or supplier certificate alone does not certify every listed model.
Keep the actual manufacturer, ordered configuration and current drawing revision with any requested inspection or traceability document. No model-specific certification, test result or customer case is established by the two catalogue pages used here.
Documents, parts and operation
The available public references are the WD2 page in the auger-drive selection guide (P02, physical PDF page 4), the auger-drive specification table in the complete catalogue (P03, physical PDF page 4), and the downloadable WD2 catalogue-reference CSV. The original printed footer on each source page reads 03; the website links use physical PDF page 4.
These are catalogue and selection references. Request the current approved mounting drawing, hydraulic connection information, operating instructions, applicable maintenance information and wear-part identification for the ordered configuration. Their availability and revision must be confirmed separately.
Ground tools and scope of supply
Confirm the auger diameter, flight length, tooth arrangement, shaft connection and any extension against the proposed work. Ask the quotation to identify the drive unit, hitch, auger, extension, hoses/couplings and wear parts individually.
A pictured accessory or mounting option is not automatically included. Keep any branding, packing and requested changes with the agreed configuration and quantity.
Information to send with a WD2 enquiry
Include the machine make/model and operating weight; mounting dimensions; hydraulic flow, pressure and return information; desired hole diameter and depth; ground description; selected auger and extension; quantity; destination; and any drawings or photographs. Include units with every dimension and hydraulic value.
If a value is unavailable, state what can be supplied and identify the open question. The enquiry form carries WD2 and its product family so the technical and purchasing discussion can begin with the same model reference.
Before confirming the order
Resolve the source-version difference in the depth information and agree the actual machine, mounting, hydraulic arrangement, ground tool and scope of supply. Keep the accepted drawing and document revision with the quotation.
No fixed price, minimum order, lead time, warranty term, certification or project performance is asserted here because those items are not established by the WD2 source pages.
Source and document traceability
Catalogue transcription for preliminary review. Confirm the applicable configuration and current approved revision before order.
- Excavator Attachment Catalogue ↗ · PDF physical page 4
- Auger Drive Selection Guide ↗ · PDF physical page 4
Applications and working conditions
Selection and purchase guides
Questions before selection
What task does WD2 address?
WD2 rotates a separately selected auger for hole drilling. P02 identifies a 1-2.5 t carrier reference and a 100-450 mm auger reference. Define the machine, mounting, ground, hole size and complete tooling arrangement before confirming the configuration.
Which information should accompany a WD2 enquiry?
Include the machine make/model and operating weight; mounting dimensions; hydraulic flow, pressure and return information; desired hole diameter and depth; ground description; selected auger and extension; quantity; destination; and any drawings or photographs. Include units with every dimension and hydraulic value.
What must be checked before confirming this configuration?
Confirm machine fitment, hydraulics, mounting, ground tool and the applicable document revision. P02 lists 1.1 m and P03 lists 1 m for a 450 mm auger in medium ground; that difference remains unresolved and is not an approved drilling-depth commitment.
What does the supplied WD2 data say about hydraulics and speed?
P03 physical PDF page 4 lists 70-240 bar and 25-57 L/min. P02 physical PDF page 4 lists a maximum output speed of 99 rpm. The pages do not establish a complete performance curve or that separate maximum values occur simultaneously.
Does the 65 mm round shaft prove my auger will fit?
No. It identifies the source-listed shaft size and form. Confirm the complete connection, retaining details, auger, hitch and current assembly drawing for the actual proposed configuration.
Are the hitch, auger, extension and hoses included?
The guide depicts mounting options but does not establish a commercial scope of supply. Ask the quotation to identify each included drive, mounting, ground tool, extension, hydraulic connection and wear part.
Where can I check the WD2 specification source?
Use P02 and P03 physical PDF page 4 and the WD2 catalogue-reference CSV linked on this page. A current approved installation drawing, operating manual or model-specific test document must be requested and checked separately.
Related model references
Parameter versions requiring confirmation
These source descriptions are shown side by side. They have not been merged into one approved specification; unaffected catalogue fields are retained above.
| Field | Source description A | Source description B |
|---|---|---|
| Medium-ground reference depth at diameter 450 mm | P02 p.4: 1.1 m | P03 p.4: 1 m |
Product type and related work stages
Vibratory Pile Drivers
Grip and vibrate the proposed pile section with the WTV excavator-mounted pile-driver range.
4 listed modelsView type, details & selection →Augers, Extensions & Ground Tools
Match augers, extensions and replaceable ground tools to the drive, hole and ground conditions.
Specify your configurationView type, details & selection →