Excavator attachment supply · Ningbo, China Search · FAQ · Support · Market / EnglishWhatsApp +86 15058273161
WE-ATTACH

Earth Drills & Auger Drives

Hydraulic Auger Drive

MODEL WD8

WD8 hydraulic auger drive for construction hole drilling. Review the machine circuit, 75 mm square tooling and ground conditions.

Resolve the source flow difference before comparing WD8 with the actual machine circuit and drilling requirement.

Weight Of Carrier, T
6-8
Max. Torque, Nm
8100
Oil Pressure, Bar
80-240
Supplied auger-drive family image for WD8 selection. Confirm the actual drive, hitch, shaft and ground tool on the current assembly drawing.

FROM AN IDEA TO A REQUIREMENT

What to specify for this attachment

Use these decisions to turn the work requirement into a model and configuration enquiry.

Information to carry into the review
DecisionWhy it mattersInformation to provide
Hole and groundThe same nominal hole can need different tooling in different ground.Diameter, depth, ground description and the required result.
Drive and shaftThe drive output and the tooling connection belong in one configuration.Machine flow/pressure, output shaft and mounting information.
Auger stringDrive, auger, extension, teeth and pilot are separate specification items.The intended tooling, any extension and wear-part identification.
Reference performanceSource depth/torque values retain their conditions and version.The exact model, source page and any unresolved data difference.
View the supplied catalogue drawing and original technical page

Supplier-provided catalogue reference · P03 physical page 4. Check the exact model header, configuration and source version. This excerpt is not a substitute for the current approved installation drawing or a model-specific test report.

Original supplied catalogue technical page 4

Catalogue specifications and source

Original units retained; not a machine compatibility approval
FieldCatalogue referenceSource physical page
ModelWD8P03 · p.4 ↗
WEIGHT OF CARRIER,T6-8P03 · p.4 ↗
MAX. TORQUE, NM8100P03 · p.4 ↗
OIL PRESSURE, BAR80-240P03 · p.4 ↗
UNIT HEIGHT, MM780P03 · p.4 ↗
UNIT DIAMETER, MM269P03 · p.4 ↗
UNIT WEIGHT, KG116P03 · p.4 ↗
OUTPUT SHAFT, MMSQUARE 75P03 · p.4 ↗
MAX. OUTPUT SPEED, RPM (P02 reference)78P02 · p.10 ↗
AUGER DIAMETER REFERENCE, MM150-1200P02 · p.10 ↗

Drawing letters such as A/B refer to the original drawing keys; verify dimensions and units with the current model drawing.

Purpose and task

P02 physical page 10 identifies WD8 in its MD auger-drive group. The drive turns a separately selected auger for hole drilling; the hitch, ground tool and any extension remain part of the proposed configuration.

How this helps your buying decision

Resolve the source flow difference before comparing WD8 with the actual machine circuit and drilling requirement. Compare WD8 with WD7 as separate source-listed assemblies. The catalogue torque references are 8100 Nm and 6830 Nm respectively. Check the carrier definition, mounting, shaft and hydraulic conditions for each option; a higher model number is not an interchangeability approval.

Compare WD8 with WD7 as separate source-listed configurations. For MAX. TORQUE, NM, the listed values are 8100 (WD8) and 6830 (WD7). For WEIGHT OF CARRIER,T, the listed values are 6-8 (WD8) and 5-7 (WD7). Keep units, mounting position, circuit labels and document conditions with each value. Similar model numbers or overlapping carrier references do not prove fitment, interchangeability or a better result for your task.

Model and configuration

Carrier reference, t: 6-8 (P03 physical page 4); Maximum torque, Nm: 8100 (P03 physical page 4); Hydraulic pressure, bar: 80-240 (P03 physical page 4); Unit height, mm: 780 (P03 physical page 4); Unit diameter, mm: 269 (P03 physical page 4); Unit weight, kg: 116 (P03 physical page 4); Output shaft, mm: SQUARE 75 (P03 physical page 4). P02 physical page 10 also lists 78 rpm as a maximum output-speed reference. Catalogue values describe the source record, not a confirmed simultaneous running point or a fully installed package.

Machine and interface review

Check the actual machine model, mounting-pin sizes, centres, inside width, installation space and motion clearance. P02 physical page 10 illustrates mounting options; the pictures do not define which hitch, frame or hydraulic connections are included.

Hydraulic, control and installation conditions

Use the source-version comparison for the unresolved flow description before matching WD8 to a machine circuit. Identify the proposed control/valve arrangement, hoses, couplings, return and back-pressure requirements against the current hydraulic drawing. Separate catalogue maxima do not establish a continuous-duty point or a complete speed/torque curve.

Structure and differences

The supplied auger-drive family description uses a hydraulic motor and planetary gearbox arrangement. For WD8, check the documented output shaft, drive dimensions and mounted tool package; a family photograph is not evidence of the exact supplied motor, hitch or auger.

Application boundaries

The page retains the unresolved source descriptions, including Flow descriptions: P02 p.10: maximum 115 L/min versus P03 p.4: range 70–150 L/min. Ask which drawing and source revision define the offered assembly. Do not select a convenient number from different versions to create a new operating point.

Manufacturing and quality responsibility

WE-ATTACH supports attachment selection, configuration requirements and coordinated supply through core manufacturing partners, with a warehouse and hillside testing site. Request the actual manufacturer, ordered assembly and scope on inspection or compliance records; a partner facility certificate does not certify every listed model.

Documents, parts and operation

Check the WD8 column on P03 physical PDF page 4 and P02 physical page 10, P02 physical page 25. The model-specific links retain the original physical page numbers. The specification CSV identifies the source for each field; a separate version-comparison CSV is available where source differences exist. These are catalogue/selection references. Current installation and hydraulic drawings, operating instructions and a model-specific performance curve must be requested and checked for the actual ordered configuration.

Ground tools and scope of supply

The drive lists a 75 mm square output shaft. P02 physical page 25 supplies related hub, auger and wear-part references. Confirm the complete hub/retaining arrangement, flight length, teeth/pilot, any extension and the ground before choosing the tool. Have the quotation list the drive, hitch/frame, auger, extension, connections and wear parts separately.

Information to send with a WD8 enquiry

For WD8, send the carrier make/model and the meaning of its rated reference; machine/mounting dimensions; hydraulic flow, pressure and return information; hole diameter and depth; ground description; the required auger/extension; quantity and destination. Include units, available drawings and any open source-version questions.

Before confirming the order

Agree the exact WD8 configuration, source/drawing revision, carrier interface, hydraulic conditions and included ground tools. Resolve open parameter versions before converting a catalogue reference into an order requirement. Price, delivery, warranty scope and any required documentation remain quotation-specific.

Source and document traceability

Catalogue transcription for preliminary review. Confirm the applicable configuration and current approved revision before order.

Applications and working conditions

Selection and purchase guides

Questions before selection

What task does WD8 address?

P02 physical page 10 identifies WD8 in its MD auger-drive group. The drive turns a separately selected auger for hole drilling; the hitch, ground tool and any extension remain part of the proposed configuration.

Which information should accompany a WD8 enquiry?

For WD8, send the carrier make/model and the meaning of its rated reference; machine/mounting dimensions; hydraulic flow, pressure and return information; hole diameter and depth; ground description; the required auger/extension; quantity and destination. Include units, available drawings and any open source-version questions.

What must be checked before confirming this configuration?

The page retains the unresolved source descriptions, including Flow descriptions: P02 p.10: maximum 115 L/min versus P03 p.4: range 70–150 L/min. Ask which drawing and source revision define the offered assembly. Do not select a convenient number from different versions to create a new operating point.

Which hydraulic and control conditions matter for WD8?

Use the source-version comparison for the unresolved flow description before matching WD8 to a machine circuit. Identify the proposed control/valve arrangement, hoses, couplings, return and back-pressure requirements against the current hydraulic drawing. Separate catalogue maxima do not establish a continuous-duty point or a complete speed/torque curve.

Does the 75 mm square shaft prove that my auger will fit?

The drive lists a 75 mm square output shaft. P02 physical page 25 supplies related hub, auger and wear-part references. Confirm the complete hub/retaining arrangement, flight length, teeth/pilot, any extension and the ground before choosing the tool.

How should I compare WD8 with WD7?

Compare WD8 with WD7 as separate source-listed assemblies. The catalogue torque references are 8100 Nm and 6830 Nm respectively. Check the carrier definition, mounting, shaft and hydraulic conditions for each option; a higher model number is not an interchangeability approval.

Which source documents and items should accompany a WD8 quotation?

Check the WD8 column on P03 physical PDF page 4 and P02 physical page 10, P02 physical page 25. The model-specific links retain the original physical page numbers. The specification CSV identifies the source for each field; a separate version-comparison CSV is available where source differences exist. These are catalogue/selection references. Current installation and hydraulic drawings, operating instructions and a model-specific performance curve must be requested and checked for the actual ordered configuration. Confirm which mounting, ground tool and connections are included in the quotation.

Related model references

Parameter versions requiring confirmation

These source descriptions are shown side by side. They have not been merged into one approved specification; unaffected catalogue fields are retained above.

Original source variants · physical PDF page numbers
FieldSource description ASource description B
Flow descriptionsP02 p.10: maximum 115 L/minP03 p.4: range 70–150 L/min
OIL FLOW,L/MINP02 p.10: 115 L/min (maximum)P03 p.4: 70-150
Medium-ground reference depth at diameter 150 mmP02 p.10: 5.4 mP03 p.4: 5.5 m
Medium-ground reference depth at diameter 1200 mmP02 p.10: 2.7 mP03 p.4: 2.5 m

Where this tool fits in the work.

Discuss WD8 with your project conditions

Missing a technical value? Describe what is available so the next information needed can be identified.

CONTINUE YOUR REVIEW

Related information for your next decision

Discuss your machine, application and configuration →

What do you need to do?

Start with part of a model or describe the job. Suggested results are for selection review.