Excavator attachment supply · Ningbo, China Search · FAQ · Support · Market / EnglishWhatsApp +86 15058273161
WE-ATTACH

Demolition & Recycling / WORK SCENARIO

Define size reduction or separation

Crushing reduces material size; screening separates a specified fraction. State feed conditions, moisture and intended output so the process can be discussed clearly.

MAKE THE REQUIREMENT SPECIFIC

Work conditions to carry into selection.

Crushing reduces material size; screening separates a specified fraction. State feed conditions, moisture and intended output so the process can be discussed clearly.

Product-specific inputs for this work stage
Tool choiceInformation to provideApplicable conditions
Crushing Buckets ↗Feed material/size; desired output; circuit; machine; site space and handling sequence.A source output figure is not a guaranteed rate for unspecified feed, moisture, reinforcement or material strength. Confirm permitted feed and duty with the actual technical package.
Screening Buckets ↗Material/moisture; required fraction; screen arrangement; machine/circuit; feeding/handling method.Screen opening, material condition and machine setup affect the result; no universal screening rate is inferred.

Compare the relevant product configurations.

Source-listed models for further review.

Crushing Buckets ↗

Model-specific source values · original fields and units retained
Complete modelSource specification snapshotDetails & download
WBC20 ↗
SUITABLE EXCAVATOR,T
20-30
RECOMMENDED FLOW RATE,L/MIN
220
INLET OPENING SIZE,MM
850×430
Source P03 · p.34 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WBC30 ↗
SUITABLE EXCAVATOR,T
25-35
RECOMMENDED FLOW RATE,L/MIN
240
INLET OPENING SIZE,MM
910×540
Source P03 · p.34 ↗
All parameters and conditions ↗
Download reference · CSV ↗

Screening Buckets ↗

Model-specific source values · original fields and units retained
Complete modelSource specification snapshotDetails & download
WSB15 ↗
SUITABLE EXCAVATOR,T
10-15
RECOMMENDED FLOW RATE,L/MIN
70
DRUM DIAMETER,MM
1000
Source P03 · p.35 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WSB20 ↗
SUITABLE EXCAVATOR,T
15-20
RECOMMENDED FLOW RATE,L/MIN
70
DRUM DIAMETER,MM
1160
Source P03 · p.35 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WSB30 ↗
SUITABLE EXCAVATOR,T
22-28
RECOMMENDED FLOW RATE,L/MIN
70
DRUM DIAMETER,MM
1320
Source P03 · p.35 ↗
All parameters and conditions ↗
Download reference · CSV ↗

Read the selection guidance.

Original product information.

PDF · 48 PAGES

Excavator Attachment Catalogue

View the original pages and retain the relevant version with your enquiry.

Continue through the work.

Demolition & Recycling

Separate structural breaking from rubble processing

State whether the material is still part of a structure or already on the ground. Include section size, reinforcement, access and desired result before comparing a breaker, crusher or pulverizer. Compare the supplied crusher and pulverizer forms separately; a rotation or magnet arrangement does not establish a different concrete-processing or lifting rating without the applicable model data.

Explore the scenario →
Demolition & Recycling

Specify the steel-cutting step

Give the material section, thickness and required mounting position. Jaw opening and a generic shear name do not establish the cutting capability for your steel.

Explore the scenario →
Demolition & Recycling

Sort and transfer the material

Describe the mixed material, size, shape and expected handled load. Select jaw/tine form and rotation needs separately from the machine lifting envelope.

Explore the scenario →
Demolition & Recycling

Separate the dismantling tool from the holding frame

For a vehicle-dismantling proposal, describe the material, access and required work sequence. The dismantling shear is a cutting configuration; the pressing frame is a separate holding arrangement. Keep their mounting, carrier and hydraulic information distinct and request the relevant drawings for the proposed setup.

Explore the scenario →
Demolition & Recycling

Identify the breaker and its lubrication requirements

Keep the full breaker model, lubrication points and operating information with the service requirement. An automatic grease device is a support component, not an alternative breaking tool. Confirm the actual connection, lubricant requirements and service instructions for the proposed breaker configuration.

Explore the scenario →

CONTINUE YOUR REVIEW

Related information for your next decision

Discuss your machine, application and configuration →

What do you need to do?

Start with part of a model or describe the job. Suggested results are for selection review.