Excavator attachment supply · Ningbo, China Search · FAQ · Support · Market / EnglishWhatsApp +86 15058273161
WE-ATTACH

WE-ATTACH / EXCAVATOR ATTACHMENTS

How to prepare quick coupler measurements

How to prepare quick coupler measurements. Prepare the model, machine and evidence needed for a clear technical enquiry.

WE-ATTACH source-led buying guide · Updated 2026-11-17 · Project and technical approval are separate from this guide.

How to prepare quick coupler measurements — supplied Hydraulic Quick Couplers family reference images.
Illustrative guide layout using supplied product-family photographs; exact models, interfaces and scope require configuration review.

This guide organizes the supplied WE-ATTACH material into an information checklist for the proposed purchase. It does not replace the model-specific approved drawing or operation instructions.

Use the supplied dimension fields

The pre-order form identifies front and rear pin diameters A1/A2, centre distance B and widths C1/C2. Record what each width measures, include units and attach labelled photographs or a drawing.

Measure both interfaces

Record the machine connection and the tool-side connection separately. A matching excavator tonne class does not establish either interface.

Close the review

Keep the exact machine model/year, drawing revision, locking configuration and any unresolved dimension with the quotation.

Information to send next

Machine-side and tool-side pin diameters, centre distances and inside widths; locking layout; hydraulic circuit. Include quantities, destination, available drawings and the unresolved questions.

Supply and evidence responsibility

WE-ATTACH connects attachment selection, configuration requirements and coordinated supply, supported by our warehouse and hillside testing site. Core manufacturing partners produce our attachments. Manufacturing facilities, staff and certificates must be attributed to the responsible partner and the applicable product.

Source and document traceability

Catalogue transcription for preliminary review. Confirm the applicable configuration and current approved revision before order.

Related applications

Model references

CONTINUE YOUR REVIEW

Related information for your next decision

Discuss your machine, application and configuration →

What do you need to do?

Start with part of a model or describe the job. Suggested results are for selection review.