FROM AN IDEA TO A REQUIREMENT
What to specify for this attachment
Use these decisions to turn the work requirement into a model and configuration enquiry.
| Decision | Why it matters | Information to provide |
|---|---|---|
| Required movement | Changing a tool, tilting it and rotating it are separate functions. | The intended tool and movement, with the required angle/clearance. |
| Upper and lower interfaces | A model name or machine class does not define the complete connection. | Machine identity, pin diameter, centres, inside width and existing tool interface. |
| Hydraulic connections | Locking, rotation or tilt may have separate requirements from the connected tool. | Available circuits, flow, pressure, return and required hose arrangement. |
| Installation information | The final arrangement must retain the applicable locking and operating information. | Current mounting drawing, full model/suffix and the intended attachment. |
View the supplied catalogue drawing and original technical page
Supplier-provided catalogue reference · P03 physical page 12. Check the exact model header, configuration and source version. This excerpt is not a substitute for the current approved installation drawing or a model-specific test report.

Catalogue specifications and source
| Field | Catalogue reference | Source physical page |
|---|---|---|
| Model | WRQ4 | P03 · p.12 ↗ |
| LENGTH(L),MM | 650 | P03 · p.12 ↗ |
| HEIGHT(H),MM | 340 | P03 · p.12 ↗ |
| WIDTH(W),MM | 405 | P03 · p.12 ↗ |
| OUTER OPENING GAP(W1),MM | 224 | P03 · p.12 ↗ |
| LOWER OPENING GAP(W2),MM | 154 | P03 · p.12 ↗ |
| WHEELBASE(L1),MM | 295 | P03 · p.12 ↗ |
| HEIGHT DIFFERENCE(H1),MM | 285 | P03 · p.12 ↗ |
| OPERATING FLOW(MOTOR),L/MIN | 60-70 | P03 · p.12 ↗ |
| WORKING PRESSURE(MOTOR),BAR | 140-160 | P03 · p.12 ↗ |
| OPERATING FLOW(CYLINDER),L/MIN | 10-30 | P03 · p.12 ↗ |
| WORKING PRESSURE(CYLINDER),BAR | 30-250 | P03 · p.12 ↗ |
| WEIGHT,KG | 145 | P03 · p.12 ↗ |
| SUITABLE CARRIER,T | 5-7 | P03 · p.12 ↗ |
Drawing letters such as A/B refer to the original drawing keys; verify dimensions and units with the current model drawing.
Purpose and task
WRQ4 is the rotating quick coupler reference for 360-degree tool positioning. Rotate a connected excavator attachment through 360° with the R-series rotary quick coupler.
How this helps your buying decision
Review both mounting interfaces and the separate rotation and locking circuits. Compare WRQ4 with WRQ06 using each complete model row. The listed geometry and any carrier reference are starting points, not approval that the models are interchangeable. Keep any suffix, slash or configuration designation with the order.
Compare WRQ4 with WRQ02 as separate source-listed configurations. For OUTER OPENING GAP(W1),MM, the listed values are 224 (WRQ4) and 200 (WRQ02). For LOWER OPENING GAP(W2),MM, the listed values are 154 (WRQ4) and 135 (WRQ02). Keep units, mounting position, circuit labels and document conditions with each value. Similar model numbers or overlapping carrier references do not prove fitment, interchangeability or a better result for your task.
Model and configuration
The model-specific catalogue row states LENGTH(L),MM: 650; HEIGHT(H),MM: 340; WIDTH(W),MM: 405; OUTER OPENING GAP(W1),MM: 224; LOWER OPENING GAP(W2),MM: 154; WHEELBASE(L1),MM: 295; HEIGHT DIFFERENCE(H1),MM: 285; OPERATING FLOW(MOTOR),L/MIN: 60-70; WORKING PRESSURE(MOTOR),BAR: 140-160; OPERATING FLOW(CYLINDER),L/MIN: 10-30; WORKING PRESSURE(CYLINDER),BAR: 30-250; WEIGHT,KG: 145; SUITABLE CARRIER,T: 5-7. Retain the original dimension keys, circuit names, units and source physical page with these values.
Machine and interface review
Measure the actual machine-side and tool-side pin diameters, centre distances and inside widths. Check installation space, tool movement and interference against both interface drawings. Keep upper and lower connections separate even when they look similar.
Hydraulic, control and installation conditions
The source lists OPERATING FLOW(MOTOR),L/MIN: 60-70; WORKING PRESSURE(MOTOR),BAR: 140-160; OPERATING FLOW(CYLINDER),L/MIN: 10-30; WORKING PRESSURE(CYLINDER),BAR: 30-250. Keep each pressure and flow value with its printed circuit label. Confirm controls, valves, hose/coupling and return requirements for the ordered assembly; connected powered tools have their own hydraulic demands. The motor rows concern rotation and the cylinder rows concern coupling actuation. The swivel description alone does not approve a particular breaker or compactor combination.
Structure and differences
The supplied R-series page identifies 360-degree rotation, a high-flow swivel joint, a gearbox drive and a steel/copper composite turbine. Rotation-motor and coupling-cylinder circuits have separate rows.
Application boundaries
Rotation is not tilt. The swivel-joint description does not approve every breaker or compactor combination: the connected tool, return conditions, interfaces and machine stability must be reviewed. A completed configuration review must identify the actual connected tool, machine and mounting arrangement.
Manufacturing and quality responsibility
WE-ATTACH supports attachment selection, configuration requirements and coordinated supply through core manufacturing partners, with a warehouse and hillside testing site. Keep the actual manufacturer, ordered model and applicable scope with inspection or compliance records. No model-specific certification is established by the catalogue photographs.
Documents, parts and operation
The model references are linked to P03 physical PDF page 12; P05 physical PDF page 10. Use the original drawing keys and the per-field-source CSV to check geometry and circuits. Request the current mounting drawing, hydraulic/control drawing and operating/lock-check instructions for the exact configuration. Catalogue illustrations are not current installation approvals.
Options and scope of supply
Have the quotation identify the coupler, upper/lower interface, pins, locking and actuation arrangement, hydraulic connections and any control components separately. Confirm which items, documents and wear parts are included; a pictured tool or option is not an automatic inclusion.
Information to send with a WRQ4 enquiry
For WRQ4, send the machine make/model, upper and lower interface dimensions, intended connected tools, desired movement, available circuit data, access/clearance requirements, quantity and destination. Include drawings or photographs and state units with every dimension and hydraulic value.
Before confirming the order
Agree both interface drawings, the complete model designation, locking method, movement/clearance and the required circuits. Keep the accepted drawing and operating-document revisions with the quotation. Price, delivery, warranty and documentary requirements are confirmed for the actual order.
Source and document traceability
Catalogue transcription for preliminary review. Confirm the applicable configuration and current approved revision before order.
- Excavator Attachment Catalogue ↗ · PDF physical page 12
- Quick Coupler Selection Guide ↗ · PDF physical page 10
Applications and working conditions
Selection and purchase guides
Questions before selection
What task does WRQ4 address?
WRQ4 is the rotating quick coupler reference for 360-degree tool positioning. Rotate a connected excavator attachment through 360° with the R-series rotary quick coupler.
Which information should accompany a WRQ4 enquiry?
For WRQ4, send the machine make/model, upper and lower interface dimensions, intended connected tools, desired movement, available circuit data, access/clearance requirements, quantity and destination. Include drawings or photographs and state units with every dimension and hydraulic value.
What must be checked before confirming this configuration?
Rotation is not tilt. The swivel-joint description does not approve every breaker or compactor combination: the connected tool, return conditions, interfaces and machine stability must be reviewed. A completed configuration review must identify the actual connected tool, machine and mounting arrangement.
Which mounting dimensions should I compare for WRQ4?
Measure the actual machine-side and tool-side pin diameters, centre distances and inside widths. Check installation space, tool movement and interference against both interface drawings. Keep upper and lower connections separate even when they look similar.
Which hydraulic and control information belongs to WRQ4?
The source lists OPERATING FLOW(MOTOR),L/MIN: 60-70; WORKING PRESSURE(MOTOR),BAR: 140-160; OPERATING FLOW(CYLINDER),L/MIN: 10-30; WORKING PRESSURE(CYLINDER),BAR: 30-250. Keep each pressure and flow value with its printed circuit label. Confirm controls, valves, hose/coupling and return requirements for the ordered assembly; connected powered tools have their own hydraulic demands. The motor rows concern rotation and the cylinder rows concern coupling actuation. The swivel description alone does not approve a particular breaker or compactor combination.
How should I compare WRQ4 with another coupler?
Compare WRQ4 with WRQ06 using each complete model row. The listed geometry and any carrier reference are starting points, not approval that the models are interchangeable. Keep any suffix, slash or configuration designation with the order. Rotation is not tilt. The swivel-joint description does not approve every breaker or compactor combination: the connected tool, return conditions, interfaces and machine stability must be reviewed.
What documents and supplied items should a WRQ4 quotation identify?
The model references are linked to P03 physical PDF page 12; P05 physical PDF page 10. Use the original drawing keys and the per-field-source CSV to check geometry and circuits. Request the current mounting drawing, hydraulic/control drawing and operating/lock-check instructions for the exact configuration. Catalogue illustrations are not current installation approvals. Have the quotation identify the coupler, upper/lower interface, pins, locking and actuation arrangement, hydraulic connections and any control components separately. Confirm which items, documents and wear parts are included; a pictured tool or option is not an automatic inclusion.
Related model references
Product type and related work stages
Tilting D Couplers
Tilt a connected attachment for slopes, trenches and angled work with the WTD D-type coupler.
6 listed modelsView type, details & selection →Hydraulic Quick Couplers
Change between excavator tools with a hydraulically operated quick-coupler connection.
9 listed modelsView type, details & selection →Light-duty Hydraulic Breakers
Choose a light-duty WHB breaker configuration for the carrier, material and breaking task.
10 listed modelsView type, details & selection →Vibratory Compactors
Compact suitable fill in trenches and earthworks with the WVC hydraulic vibratory-compactor range.
6 listed modelsView type, details & selection →Double-lock D Couplers
Connect excavator attachments with the WDQ D-type double-lock coupler range.
8 listed modelsView type, details & selection →Tilting S Couplers
Add tool tilt to the WTS S-type coupler arrangement for angled excavation and finishing work.
4 listed modelsView type, details & selection →Upgraded Vibratory Compactors
Select the WEC vibratory-compactor arrangement for the required plate geometry and hydraulic input.
4 listed modelsView type, details & selection →Medium-duty Hydraulic Breakers
Choose a medium-duty WHB breaker configuration against the carrier circuit and material to be broken.
10 listed modelsView type, details & selection →Heavy-duty Hydraulic Breakers
Review heavy-duty WHB breaker models for the machine capacity and proposed breaking conditions.
11 listed modelsView type, details & selection →Fully Hydraulic Breakers
Compare the WHB-Y fully hydraulic breaker configuration with the documented hydraulic requirements.
7 listed modelsView type, details & selection →