FROM AN IDEA TO A REQUIREMENT
What to specify for this attachment
Use these decisions to turn the work requirement into a model and configuration enquiry.
| Decision | Why it matters | Information to provide |
|---|---|---|
| Required movement | Changing a tool, tilting it and rotating it are separate functions. | The intended tool and movement, with the required angle/clearance. |
| Upper and lower interfaces | A model name or machine class does not define the complete connection. | Machine identity, pin diameter, centres, inside width and existing tool interface. |
| Hydraulic connections | Locking, rotation or tilt may have separate requirements from the connected tool. | Available circuits, flow, pressure, return and required hose arrangement. |
| Installation information | The final arrangement must retain the applicable locking and operating information. | Current mounting drawing, full model/suffix and the intended attachment. |
Structure and functions in the supplied material
The WDQ D-type arrangement is described with front and rear locks, a flat push structure and a load-bearing lower plate in a welded body. Locking sequence, pin geometry and tool clearance should be reviewed together; a D-type name alone does not define every compatible tool.
Models and parameter comparison
| Parameter | WDQ02 ↗ | WDQ03 ↗ | WDQ04 ↗ | WDQ05 ↗ | WDQ06 ↗ | WDQ08 ↗ | WDQ09 ↗ | WDQ10 ↗ |
|---|---|---|---|---|---|---|---|---|
| LENGTH(L),MM | 450-500 | 580-630 | 600-630 | 660-720 | 900-970 | 1000-1050 | 1300-1400 | CUSTOMIZABLE |
| WIDTH(W),MM | 150-200 | 210-250 | 240-310 | 300-385 | 360-420 | 450-560 | 530-640 | CUSTOMIZABLE |
| HEIGHT(H),MM | 250-300 | 310-350 | 310-350 | 350-380 | 435-470 | 530-560 | 620-670 | 650-700 |
| PIN DIAMETER(ØD),MM | 25-30 | 35-40 | 45 | 50-60 | 60-70 | 80-90 | 90-100 | 100-120 |
| PIN CENTER DISTANCE(C-C),MM | 85-180 | 170-245 | 245-300 | 290-360 | 350-420 | 400-510 | 500-560 | CUSTOMIZABLE |
| DIPPER WIDTH(W1),MM | 90-120 | 110-160 | 150-230 | 220-280 | 250-320 | 300-390 | 350-420 | CUSTOMIZABLE |
| WORKING PRESSURE,BAR | 15-250 | 15-250 | 15-250 | 15-250 | 15-250 | 15-250 | 15-250 | 15-250 |
| REQUIRED FLOW,L/MIN | 10-30 | 10-30 | 10-30 | 10-30 | 10-30 | 10-30 | 10-30 | 10-30 |
| WEIGHT,KG | 20-30 | 35-50 | 60-80 | 90-120 | 200-260 | 340-380 | 530-580 | 650-800 |
| SUITABLE CARRIER,T | 1-2 | 2.5-4 | 5-6 | 7-10 | 11-17 | 18-25 | 25-36 | 36-45 |
Tasks, applications and buyer value
The source describes front and rear locks; the buyer can ask how both interfaces and the locking check are handled on the proposed machine.
Selection inputs and applicable conditions
Front/rear connection geometry; locking sequence; cylinder flow/pressure; machine and attachment interface drawings.
The presence of two locks is not a substitute for the model-specific installation, operating and lock-check instructions.
Plan the work around the attachment
Start with the tool connection
Record pin diameters, centres, inside width and the intended tool interface. Identify the existing standard and its revision instead of relying on a similar name.
Choose the movement your job needs
A fixed coupler changes the tool connection; a tilting coupler adds tilt; a rotary coupler adds rotation. Compare those functions separately against the task and available clearance.
Confirm the installed configuration
Keep the locking method, hydraulic connections, installation drawing and applicable operating instructions with the proposed model. Separate the connected tool circuit from coupler actuation.
Available information and source documents
The supplied family material supports this type entry. Complete order configuration, current drawing and applicable operation documents remain part of the model review.
Selection and purchase guidance
Where this tool fits in the work.
Questions specific to this type
What should I compare before choosing Double-lock D Couplers?
Front/rear connection geometry; locking sequence; cylinder flow/pressure; machine and attachment interface drawings.
Which limits remain important for the purchase?
The presence of two locks is not a substitute for the model-specific installation, operating and lock-check instructions.
