FROM AN IDEA TO A REQUIREMENT
What to specify for this attachment
Use these decisions to turn the work requirement into a model and configuration enquiry.
| Decision | Why it matters | Information to provide |
|---|---|---|
| Work stage and material | Steel cutting, primary concrete processing and secondary reduction are not interchangeable. | Material, section/reinforcement and the proposed work sequence. |
| Jaw and mounting arrangement | Opening and tool position affect access and the working envelope. | Section/block size, mounting position and required reach/clearance. |
| Hydraulics and positioning | Working and rotation requirements belong to the exact head arrangement. | Machine, flow, pressure and the required rotation circuit. |
| Wear parts and documents | Blade/tooth arrangement and technical revision stay with the configuration. | Full model/suffix, blade/teeth information and current drawing requirements. |
View the supplied catalogue drawing and original technical page
Supplier-provided catalogue reference · P03 physical page 21. Check the exact model header, configuration and source version. This excerpt is not a substitute for the current approved installation drawing or a model-specific test report.

Catalogue specifications and source
| Field | Catalogue reference | Source physical page |
|---|---|---|
| Model | WRP18C | P03 · p.21 ↗ |
| MAX OPENING WIDTH,MM | 660 | P03 · p.21 ↗ |
| WEIGHT,KG | 2400 | P03 · p.21 ↗ |
| SHEARING FORCE(AVERAGE),KN | 2700 | P03 · p.21 ↗ |
| CRUSHING FORCE(END),KN | 800 | P03 · p.21 ↗ |
| CYLINDER WORKING PRESSURE,BAR | 300-350 | P03 · p.21 ↗ |
| CYLINDER OIL FLOW,L/MIN | 140-240 | P03 · p.21 ↗ |
| MOTOR WORKING PRESSURE,BAR | 120-160 | P03 · p.21 ↗ |
| MOTOR OIL FLOW,L/MIN | 30-50 | P03 · p.21 ↗ |
| SUITABLE EXCAVATOR,T | 15-20 | P03 · p.21 ↗ |
| TEETH | SINGLE TOOTH | P03 · p.21 ↗ |
| A | 1850 | P03 · p.21 ↗ |
| B | 660 | P03 · p.21 ↗ |
| C | 140 | P03 · p.21 ↗ |
| D | 662 | P03 · p.21 ↗ |
| E | 585 | P03 · p.21 ↗ |
| ROTATION MODE | HYDRAULIC ROTATION, 360° CONTINUOUS ROTATION | P03 · p.21 ↗ |
Drawing letters such as A/B refer to the original drawing keys; verify dimensions and units with the current model drawing.
Purpose and task
WRP18C is the rotating pulverizer reference for positioning and processing concrete. Position the jaws around concrete and carry out secondary processing with the WRP rotating-pulverizer range.
How this helps your buying decision
Check opening, jaw envelope and machine stability at the working reach; define concrete, reinforcement and the processing stage. Compare WRP18C with WRP20 as separate source-listed configurations. For CYLINDER OIL FLOW,L/MIN, the listed values are 140-240 (WRP18C) and 180-240 (WRP20). For MOTOR OIL FLOW,L/MIN, the listed values are 30-50 (WRP18C) and 30-50 (WRP20). Keep units, mounting position, circuit labels and document conditions with each value. Similar model numbers or overlapping carrier references do not prove fitment, interchangeability or a better result for your task.
Model and configuration
The model-specific source row states: MAX OPENING WIDTH,MM: 660; WEIGHT,KG: 2400; SHEARING FORCE(AVERAGE),KN: 2700; CRUSHING FORCE(END),KN: 800; CYLINDER WORKING PRESSURE,BAR: 300-350; CYLINDER OIL FLOW,L/MIN: 140-240; MOTOR WORKING PRESSURE,BAR: 120-160; MOTOR OIL FLOW,L/MIN: 30-50; SUITABLE EXCAVATOR,T: 15-20; TEETH: SINGLE TOOTH; A: 1850; B: 660; C: 140; D: 662; E: 585; ROTATION MODE: HYDRAULIC ROTATION, 360° CONTINUOUS ROTATION. Retain the printed units, dimension keys and applicable circuit or mounting labels; unknown drawing units require confirmation rather than conversion.
Machine and interface review
Check opening, jaw envelope and machine stability at the working reach; define concrete, reinforcement and the processing stage. Check mounting pins, centres, inside width, overall envelope and clearance through the intended movement against the actual assembly drawing. Catalogue carrier references are preliminary selection information, not machine-specific approval.
Installation, control and operating conditions
The source lists CYLINDER WORKING PRESSURE,BAR: 300-350; CYLINDER OIL FLOW,L/MIN: 140-240; MOTOR WORKING PRESSURE,BAR: 120-160; MOTOR OIL FLOW,L/MIN: 30-50. Check the actual machine flow/pressure at the intended settings, control/valve arrangement, hose/coupling dimensions, return/back-pressure and any case-drain requirement against the current hydraulic drawing. Separate catalogue ranges or maxima do not establish one approved simultaneous running point. Retain the complete C suffix where present. WRP18C is listed as SINGLE TOOTH; WRP20 as FIXED AND CANNOT BE REPLACED; WRP20C as WHOLE JAW PLATE REPLACEABLE. Do not transfer these tooth descriptions between models.
Structure and differences
The supplied pulverizer text discusses replaceable teeth, jaw/pressure-plate configuration and cylinder protection. Rotation adds its own circuit and positioning review. Retain the complete C suffix where present. WRP18C is listed as SINGLE TOOTH; WRP20 as FIXED AND CANNOT BE REPLACED; WRP20C as WHOLE JAW PLATE REPLACEABLE. Do not transfer these tooth descriptions between models.
Application boundaries
Do not infer processing rate, noise reduction, magnetic lifting capacity or circuit requirements that are absent from the exact model documents.
Manufacturing and quality responsibility
WE-ATTACH supports attachment selection, configuration requirements and coordinated supply through core manufacturing partners, with a warehouse and hillside testing site. Keep the actual manufacturer, ordered model and applicable scope with inspection, material or compliance records. A partner facility certificate or catalogue image is not model-specific product approval.
Documents, parts and operation
Use P03 physical PDF page 21 and the model-reference CSV linked on this page. Each exported parameter retains its source ID and physical page. Catalogue sketches, source images and selection tables are reference information; request the current mounting/connection drawing, operating and maintenance instructions and model-specific evidence for the actual ordered configuration.
Options and scope of supply
Specify the exact tooth/jaw plate, cutting parts, rotation head and cylinder/motor connections. Have the quotation identify the attachment, mounting, controls/connections, included accessories and required parts individually. A pictured option, support frame or related tool is not automatically included.
Information to send with a WRP18C enquiry
For WRP18C, send machine make/model and operating weight; mounting/linkage dimensions; available circuit and return information where applicable; material, work stage, access/reach and desired result; Concrete/reinforcement; opening; tooth/plate configuration; mounting; circuit; requested processing result. Include quantity, destination and any drawings/photos. State units and identify unknown values rather than substituting a similar machine or model.
Before confirming the order
Agree the complete model and suffix, actual machine, interfaces, operating conditions and scope of supply. Keep unresolved source descriptions and accepted drawing/document revisions with the quotation. Confirm inspection/document requirements, price, delivery, warranty and service scope for the actual order; no unverified term or performance commitment is added here.
Source and document traceability
Catalogue transcription for preliminary review. Confirm the applicable configuration and current approved revision before order.
- Excavator Attachment Catalogue ↗ · PDF physical page 21
Applications and working conditions
Selection and purchase guides
Questions before selection
What task does WRP18C address?
WRP18C is the rotating pulverizer reference for positioning and processing concrete. Position the jaws around concrete and carry out secondary processing with the WRP rotating-pulverizer range.
Which information should accompany a WRP18C enquiry?
For WRP18C, send machine make/model and operating weight; mounting/linkage dimensions; available circuit and return information where applicable; material, work stage, access/reach and desired result; Concrete/reinforcement; opening; tooth/plate configuration; mounting; circuit; requested processing result. Include quantity, destination and any drawings/photos. State units and identify unknown values rather than substituting a similar machine or model.
What must be checked before confirming this configuration?
Do not infer processing rate, noise reduction, magnetic lifting capacity or circuit requirements that are absent from the exact model documents.
How should I compare WRP18C with another configuration?
Compare WRP18C with WRP20 as separate source-listed configurations. For CYLINDER OIL FLOW,L/MIN, the listed values are 140-240 (WRP18C) and 180-240 (WRP20). For MOTOR OIL FLOW,L/MIN, the listed values are 30-50 (WRP18C) and 30-50 (WRP20). Keep units, mounting position, circuit labels and document conditions with each value. Similar model numbers or overlapping carrier references do not prove fitment, interchangeability or a better result for your task. Retain the complete C suffix where present. WRP18C is listed as SINGLE TOOTH; WRP20 as FIXED AND CANNOT BE REPLACED; WRP20C as WHOLE JAW PLATE REPLACEABLE. Do not transfer these tooth descriptions between models.
What installation and operating information is needed for WRP18C?
Check opening, jaw envelope and machine stability at the working reach; define concrete, reinforcement and the processing stage. The source lists CYLINDER WORKING PRESSURE,BAR: 300-350; CYLINDER OIL FLOW,L/MIN: 140-240; MOTOR WORKING PRESSURE,BAR: 120-160; MOTOR OIL FLOW,L/MIN: 30-50. Check the actual machine flow/pressure at the intended settings, control/valve arrangement, hose/coupling dimensions, return/back-pressure and any case-drain requirement against the current hydraulic drawing. Separate catalogue ranges or maxima do not establish one approved simultaneous running point.
Where can I check the source and current documents for WRP18C?
Use P03 physical PDF page 21 and the model-reference CSV linked on this page. Each exported parameter retains its source ID and physical page. Catalogue sketches, source images and selection tables are reference information; request the current mounting/connection drawing, operating and maintenance instructions and model-specific evidence for the actual ordered configuration.
Which parts and options should the WRP18C quotation identify?
Specify the exact tooth/jaw plate, cutting parts, rotation head and cylinder/motor connections. Confirm the exact configuration and each included item rather than using a family illustration as a packing list.
Related model references
Product type and related work stages
CR Hydraulic Crushers
Process concrete with the WCR hydraulic-crusher range; match jaw geometry to the structure and work stage.
3 listed modelsView type, details & selection →Hydraulic Steel Shears
Cut steel sections and prepare metal for handling with the WHS hydraulic steel-shear range.
5 listed modelsView type, details & selection →Scrap Grapples
Pick and transfer irregular scrap with the WGWS grapple range.
3 listed modelsView type, details & selection →CC Hydraulic Crushers
Process concrete using the WCC crusher configuration, with model-specific opening and hydraulic requirements.
3 listed modelsView type, details & selection →