FROM AN IDEA TO A REQUIREMENT
What to specify for this attachment
Use these decisions to turn the work requirement into a model and configuration enquiry.
| Decision | Why it matters | Information to provide |
|---|---|---|
| Ground and work stage | Loosening resistant material is distinct from excavating or crushing it. | Ground/material and the result needed before the next operation. |
| Geometry and connection | The shank, mounting and machine envelope must be reviewed together. | Carrier, pin dimensions, centre distances and clearance. |
| Tooth and wear parts | The replaceable working tip stays with the specified arrangement. | Tooth identity, wear requirements and relevant drawing information. |
Structure and functions in the supplied material
The supplied product text describes side reinforcement and a replaceable tip/tooth; WR models have their own interface and geometry rows.
Models and parameter comparison
| Parameter | WR02 ↗ | WR04 ↗ | WR06 ↗ | WR08 ↗ | WR10 ↗ | WR12 ↗ | WR14 ↗ |
|---|---|---|---|---|---|---|---|
| OPENING WIDTH, MM | 110-160 | 150-230 | 220-300 | 300-360 | 360-410 | 410-480 | 480-550 |
| CENTER DISTANCE, MM | 170-245 | 240-300 | 300-420 | 400-510 | 480-560 | 530-600 | 580-680 |
| SHAFT DIAMETER, MM | 35-40 | 40-55 | 60-70 | 80-90 | 90-100 | 100-110 | 110-120 |
| HEIGHT, MM | 640 | 930 | 1240 | 1360 | 1500 | 1660 | 1970 |
| MAIN PLATE THICKNESS, MM | 50 | 50 | 60 | 80 | 80 | 90 | 90 |
| BUCKET TOOTH MODEL | DH55 | DH150 | DH220 | D85 | D85 | 4T5502 | 4T5502 |
| WEIGHT(EXCLUDING PINS), KG | 60 | 130 | 270 | 450 | 640 | 950 | 1420 |
| SUITABLE EXCAVATOR, T | 2-4 | 5-8 | 9-16 | 17-23 | 24-30 | 31-35 | 36-45 |
Tasks, applications and buyer value
Define the material and access so the machine interface, penetration geometry and wear-tooth arrangement can be discussed as one selection.
Selection inputs and applicable conditions
Material; tooth configuration; pin/centre/width; reach; current drawing and work arrangement.
A ripper is not a compactor. No production rate or material hardness capability follows from the carrier reference alone.
Plan the work around the attachment
Describe the task
Provide the work stage, material, access and required result. Keep those conditions with the model comparison.
Match the machine and attachment
Confirm machine identity, mounting dimensions, attachment mass and relevant hydraulic information against the documented model data.
Keep the technical package together
Request the installation and operating information, wear parts and applicable inspection documents for the exact proposed configuration.
Available information and source documents
The supplied family material supports this type entry. Complete order configuration, current drawing and applicable operation documents remain part of the model review.
Selection and purchase guidance
Where this tool fits in the work.
Questions specific to this type
What should I compare before choosing Rippers?
Material; tooth configuration; pin/centre/width; reach; current drawing and work arrangement.
Which limits remain important for the purchase?
A ripper is not a compactor. No production rate or material hardness capability follows from the carrier reference alone.
