FROM AN IDEA TO A REQUIREMENT
What to specify for this attachment
Use these decisions to turn the work requirement into a model and configuration enquiry.
| Decision | Why it matters | Information to provide |
|---|---|---|
| Work stage and material | Steel cutting, primary concrete processing and secondary reduction are not interchangeable. | Material, section/reinforcement and the proposed work sequence. |
| Jaw and mounting arrangement | Opening and tool position affect access and the working envelope. | Section/block size, mounting position and required reach/clearance. |
| Hydraulics and positioning | Working and rotation requirements belong to the exact head arrangement. | Machine, flow, pressure and the required rotation circuit. |
| Wear parts and documents | Blade/tooth arrangement and technical revision stay with the configuration. | Full model/suffix, blade/teeth information and current drawing requirements. |
Structure and functions in the supplied material
The illustrated frame uses paired side members and hydraulic cylinders to restrain the vehicle body during a separate dismantling operation. WCA20D and WCA20S are listed separately. Keep the selected frame geometry, carrier mounting and interaction with the dismantling shear in one configuration review.
Models and parameter comparison
| Parameter | WCA20D ↗ | WCA20S ↗ |
|---|---|---|
| A | 1216 | 1150 |
| B | 3600 | / |
| C | 1500 | 1290 |
| D | 2600 | 2840 |
| E | 5500 | 6000 |
| MAX. OPENING WIDTH, MM | 3600 | / |
| MAX. HEIGHT, MM | 2600 | 2840 |
| WORKING PRESSURE(CLAMPING), BAR | 150-250 | 150-250 |
| OIL FLOW RANGE(CLAMPING), L/MIN | 80-120 | 80-120 |
| WORKING PRESSURE(LIFTING), BAR | 200-300 | / |
| OIL FLOW RANGE(LIFTING), L/MIN | 30-50 | / |
| TOTAL WEIGHT, KG | 3200 | 2800 |
| OPERATION MODE | BI-DIRECTIONAL | UNI-DIRECTIONAL |
| SUITABLE EXCAVATOR,T | 18-27 | 18-27 |
Tasks, applications and buyer value
Keep the vehicle restraint/pressing arrangement with the cutting-tool proposal so the work sequence is reviewed as a whole.
Selection inputs and applicable conditions
One-way/two-way requirement; vehicle/material; installation drawing; movement envelope and machine.
A pressing frame is not an interchangeable shear head. Confirm the installation, travel/envelope and responsible review of the complete machine arrangement.
Plan the work around the attachment
Describe the task
Provide the work stage, material, access and required result. Keep those conditions with the model comparison.
Match the machine and attachment
Confirm machine identity, mounting dimensions, attachment mass and relevant hydraulic information against the documented model data.
Keep the technical package together
Request the installation and operating information, wear parts and applicable inspection documents for the exact proposed configuration.
Available information and source documents
The supplied family material supports this type entry. Complete order configuration, current drawing and applicable operation documents remain part of the model review.
Selection and purchase guidance
Where this tool fits in the work.
Questions specific to this type
What should I compare before choosing Car Dismantling Pressing Frames?
One-way/two-way requirement; vehicle/material; installation drawing; movement envelope and machine.
Which limits remain important for the purchase?
A pressing frame is not an interchangeable shear head. Confirm the installation, travel/envelope and responsible review of the complete machine arrangement.
