FROM AN IDEA TO A REQUIREMENT
What to specify for this attachment
Use these decisions to turn the work requirement into a model and configuration enquiry.
| Decision | Why it matters | Information to provide |
|---|---|---|
| Work stage and material | Steel cutting, primary concrete processing and secondary reduction are not interchangeable. | Material, section/reinforcement and the proposed work sequence. |
| Jaw and mounting arrangement | Opening and tool position affect access and the working envelope. | Section/block size, mounting position and required reach/clearance. |
| Hydraulics and positioning | Working and rotation requirements belong to the exact head arrangement. | Machine, flow, pressure and the required rotation circuit. |
| Wear parts and documents | Blade/tooth arrangement and technical revision stay with the configuration. | Full model/suffix, blade/teeth information and current drawing requirements. |
Structure and functions in the supplied material
The supplied material discusses cutting arms/blades, rotation equipment and alternative mounting heads. The readable dimension table is kept separate from overlapping source annotations.
Models and parameter comparison
| Parameter | WES08 ↗ | WES18 ↗ | WES25 ↗ | WES40 ↗ | WES50 ↗ | WES60 ↗ |
|---|---|---|---|---|---|---|
| A | 1540 | 2250 | 2630 | 2895 | 3450 | 3915 |
| B | 319 | 440 | 500 | 600 | 810 | 930 |
| C | 249 | 314 | 347 | 430 | 500 | 520 |
| D | 486 | 642 | 732 | 816 | 1038 | 1038 |
| E | 375 | 480 | 525 | 620 | 787 | 940 |
| MAX. OPENING WIDTH, MM | 319 | 440 | 500 | 600 | 810 | 930 |
| WEIGHT (BOOM TYPE), KG | / | 1900 | 2700 | 4200 | 7000 | 7800 |
| WEIGHT (ARM TYPE), KG | 660 | 1700 | 2475 | 3800 | 6650 | 7500 |
| CYLINDER WORKING PRESSURE, BAR | 200-300 | 300-350 | 300-350 | 300-350 | 300-350 | 275-380 |
| CYLINDER OIL FLOW, L/MIN | 60-120 | 140-240 | 180-240 | 200-250 | 300-500 | 300-560 |
| MOTOR WORKING PRESSURE, BAR | 60-90 | 120-160 | 120-160 | 120-160 | 140-170 | 140-170 |
| MOTOR OIL FLOW, L/MIN | 30-50 | 30-50 | 30-50 | 30-50 | 30-50 | 30-50 |
| MAX. SHEARING FORCE, KN | 2880 | 3395 | 3600 | 4850 | 5800 | 10960 |
| SUITABLE EXCAVATOR (ARM TYPE), T | 6-10 | 13-20 | 20-35 | 30-38 | 40-60 | 60-70 |
| SUITABLE EXCAVATOR (BOOM TYPE), T | / | 8-14 | 13-25 | 20-28 | 35-40 | 40-50 |
Tasks, applications and buyer value
Discuss the access, cut section and mounting position so the offered head and carrier configuration address the actual cutting task.
Selection inputs and applicable conditions
Section/material; required opening; mounting head/position; reach; rotation/cylinder circuits and current drawing.
No underwater depth, “first” claim, comparative wear percentage or unsupported force value is inferred. Mounting reach and machine stability need project review.
Plan the work around the attachment
Describe the task
Provide the work stage, material, access and required result. Keep those conditions with the model comparison.
Match the machine and attachment
Confirm machine identity, mounting dimensions, attachment mass and relevant hydraulic information against the documented model data.
Keep the technical package together
Request the installation and operating information, wear parts and applicable inspection documents for the exact proposed configuration.
Available information and source documents
The supplied family material supports this type entry. Complete order configuration, current drawing and applicable operation documents remain part of the model review.
Selection and purchase guidance
Where this tool fits in the work.
Questions specific to this type
What should I compare before choosing Eagle Shears?
Section/material; required opening; mounting head/position; reach; rotation/cylinder circuits and current drawing.
Which limits remain important for the purchase?
No underwater depth, “first” claim, comparative wear percentage or unsupported force value is inferred. Mounting reach and machine stability need project review.
