FROM AN IDEA TO A REQUIREMENT
What to specify for this attachment
Use these decisions to turn the work requirement into a model and configuration enquiry.
| Decision | Why it matters | Information to provide |
|---|---|---|
| Work stage and material | Steel cutting, primary concrete processing and secondary reduction are not interchangeable. | Material, section/reinforcement and the proposed work sequence. |
| Jaw and mounting arrangement | Opening and tool position affect access and the working envelope. | Section/block size, mounting position and required reach/clearance. |
| Hydraulics and positioning | Working and rotation requirements belong to the exact head arrangement. | Machine, flow, pressure and the required rotation circuit. |
| Wear parts and documents | Blade/tooth arrangement and technical revision stay with the configuration. | Full model/suffix, blade/teeth information and current drawing requirements. |
View the supplied catalogue drawing and original technical page
Supplier-provided catalogue reference · P03 physical page 15. Check the exact model header, configuration and source version. This excerpt is not a substitute for the current approved installation drawing or a model-specific test report.

Catalogue specifications and source
| Field | Catalogue reference | Source physical page |
|---|---|---|
| Model | WHS08 | P03 · p.15 ↗ |
| MAX. OPENING WIDTH, MM | 420 | P03 · p.15 ↗ |
| WEIGHT, KG | 650 | P03 · p.15 ↗ |
| AVERAGE SHEARING FORCE, KN | 486 | P03 · p.15 ↗ |
| CYLINDER WORKING PRESSURE, BAR | 180-250 | P03 · p.15 ↗ |
| CYLINDER OIL FLOW, L/MIN | 50-100 | P03 · p.15 ↗ |
| MOTOR WORKING PRESSURE, BAR | 60-90 | P03 · p.15 ↗ |
| MOTOR OIL FLOW, L/MIN | 20-30 | P03 · p.15 ↗ |
| SUITABLE EXCAVATOR, T | 6-13 | P03 · p.15 ↗ |
| ROTATION MODE | HYDRAULIC ROTATING, 360° FREE ROTATION | P03 · p.15 ↗ |
Drawing letters such as A/B refer to the original drawing keys; verify dimensions and units with the current model drawing.
Purpose and task
WHS08 is the hydraulic steel shear reference for steel cutting. Cut steel sections and prepare metal for handling with the WHS hydraulic steel-shear range.
How this helps your buying decision
Specify boom or arm mounting, the actual steel section and available reach. Check carrier stability with the complete shear and bracket mass. Compare WHS08 with WHS25 as separate source-listed configurations. For CYLINDER OIL FLOW, L/MIN, the listed values are 50-100 (WHS08) and 180-240 (WHS25). For MOTOR OIL FLOW, L/MIN, the listed values are 20-30 (WHS08) and 30-50 (WHS25). Keep units, mounting position, circuit labels and document conditions with each value. Similar model numbers or overlapping carrier references do not prove fitment, interchangeability or a better result for your task.
Model and configuration
The model-specific source row states: MAX. OPENING WIDTH, MM: 420; WEIGHT, KG: 650; AVERAGE SHEARING FORCE, KN: 486; CYLINDER WORKING PRESSURE, BAR: 180-250; CYLINDER OIL FLOW, L/MIN: 50-100; MOTOR WORKING PRESSURE, BAR: 60-90; MOTOR OIL FLOW, L/MIN: 20-30; SUITABLE EXCAVATOR, T: 6-13; ROTATION MODE: HYDRAULIC ROTATING, 360° FREE ROTATION. Retain the printed units, dimension keys and applicable circuit or mounting labels; unknown drawing units require confirmation rather than conversion.
Machine and interface review
Specify boom or arm mounting, the actual steel section and available reach. Check carrier stability with the complete shear and bracket mass. Check mounting pins, centres, inside width, overall envelope and clearance through the intended movement against the actual assembly drawing. Catalogue carrier references are preliminary selection information, not machine-specific approval.
Installation, control and operating conditions
The source lists CYLINDER WORKING PRESSURE, BAR: 180-250; CYLINDER OIL FLOW, L/MIN: 50-100; MOTOR WORKING PRESSURE, BAR: 60-90; MOTOR OIL FLOW, L/MIN: 20-30. Check the actual machine flow/pressure at the intended settings, control/valve arrangement, hose/coupling dimensions, return/back-pressure and any case-drain requirement against the current hydraulic drawing. Separate catalogue ranges or maxima do not establish one approved simultaneous running point. Cylinder and rotation-motor circuits are different. The main table and dimension table carry different model headers; do not assign the dimension table by column position.
Structure and differences
The source material describes blade arrangements, a piston motor, an acceleration valve and cylinder construction; materials and component choices need to match the ordered model/BOM. Cylinder and rotation-motor circuits are different. The main table and dimension table carry different model headers; do not assign the dimension table by column position.
Application boundaries
The steel-shear parameter and dimension headers conflict. Keep their tables separate; comparative efficiency, blade-life and strength figures are not treated as verified results. P03 page 15 lists WHS08/25/30/40/55 in the main table but WHS06/08/10/14/15 in the dimension table. The mismatched dimension columns are not assigned to this main model row.
Manufacturing and quality responsibility
WE-ATTACH supports attachment selection, configuration requirements and coordinated supply through core manufacturing partners, with a warehouse and hillside testing site. Keep the actual manufacturer, ordered model and applicable scope with inspection, material or compliance records. A partner facility certificate or catalogue image is not model-specific product approval.
Documents, parts and operation
Use P03 physical PDF page 15 and the model-reference CSV linked on this page. Each exported parameter retains its source ID and physical page. Catalogue sketches, source images and selection tables are reference information; request the current mounting/connection drawing, operating and maintenance instructions and model-specific evidence for the actual ordered configuration.
Options and scope of supply
Identify blades, blade adjustment/fasteners, pins, hoses and the approved mounting drawing. Have the quotation identify the attachment, mounting, controls/connections, included accessories and required parts individually. A pictured option, support frame or related tool is not automatically included.
Information to send with a WHS08 enquiry
For WHS08, send machine make/model and operating weight; mounting/linkage dimensions; available circuit and return information where applicable; material, work stage, access/reach and desired result; Steel/section; opening; cutting-force definition; mounting position; cylinder/rotation circuits; approved model drawing. Include quantity, destination and any drawings/photos. State units and identify unknown values rather than substituting a similar machine or model.
Before confirming the order
Agree the complete model and suffix, actual machine, interfaces, operating conditions and scope of supply. Keep unresolved source descriptions and accepted drawing/document revisions with the quotation. Confirm inspection/document requirements, price, delivery, warranty and service scope for the actual order; no unverified term or performance commitment is added here.
Source and document traceability
Catalogue transcription for preliminary review. Confirm the applicable configuration and current approved revision before order.
- Excavator Attachment Catalogue ↗ · PDF physical page 15
Applications and working conditions
Selection and purchase guides
Questions before selection
What task does WHS08 address?
WHS08 is the hydraulic steel shear reference for steel cutting. Cut steel sections and prepare metal for handling with the WHS hydraulic steel-shear range.
Which information should accompany a WHS08 enquiry?
For WHS08, send machine make/model and operating weight; mounting/linkage dimensions; available circuit and return information where applicable; material, work stage, access/reach and desired result; Steel/section; opening; cutting-force definition; mounting position; cylinder/rotation circuits; approved model drawing. Include quantity, destination and any drawings/photos. State units and identify unknown values rather than substituting a similar machine or model.
What must be checked before confirming this configuration?
The steel-shear parameter and dimension headers conflict. Keep their tables separate; comparative efficiency, blade-life and strength figures are not treated as verified results. P03 page 15 lists WHS08/25/30/40/55 in the main table but WHS06/08/10/14/15 in the dimension table. The mismatched dimension columns are not assigned to this main model row.
How should I compare WHS08 with another configuration?
Compare WHS08 with WHS25 as separate source-listed configurations. For CYLINDER OIL FLOW, L/MIN, the listed values are 50-100 (WHS08) and 180-240 (WHS25). For MOTOR OIL FLOW, L/MIN, the listed values are 20-30 (WHS08) and 30-50 (WHS25). Keep units, mounting position, circuit labels and document conditions with each value. Similar model numbers or overlapping carrier references do not prove fitment, interchangeability or a better result for your task. Cylinder and rotation-motor circuits are different. The main table and dimension table carry different model headers; do not assign the dimension table by column position.
What installation and operating information is needed for WHS08?
Specify boom or arm mounting, the actual steel section and available reach. Check carrier stability with the complete shear and bracket mass. The source lists CYLINDER WORKING PRESSURE, BAR: 180-250; CYLINDER OIL FLOW, L/MIN: 50-100; MOTOR WORKING PRESSURE, BAR: 60-90; MOTOR OIL FLOW, L/MIN: 20-30. Check the actual machine flow/pressure at the intended settings, control/valve arrangement, hose/coupling dimensions, return/back-pressure and any case-drain requirement against the current hydraulic drawing. Separate catalogue ranges or maxima do not establish one approved simultaneous running point.
Where can I check the source and current documents for WHS08?
Use P03 physical PDF page 15 and the model-reference CSV linked on this page. Each exported parameter retains its source ID and physical page. Catalogue sketches, source images and selection tables are reference information; request the current mounting/connection drawing, operating and maintenance instructions and model-specific evidence for the actual ordered configuration.
Which parts and options should the WHS08 quotation identify?
Identify blades, blade adjustment/fasteners, pins, hoses and the approved mounting drawing. Confirm the exact configuration and each included item rather than using a family illustration as a packing list.
Related model references
Product type and related work stages
Eagle Shears
Cut metal with the WES eagle-shear arrangement, selecting the jaw geometry for the proposed section.
6 listed modelsView type, details & selection →Fixed Pulverizers
Reduce concrete in secondary processing with the WFP fixed-pulverizer range.
6 listed modelsView type, details & selection →Scrap Grapples
Pick and transfer irregular scrap with the WGWS grapple range.
3 listed modelsView type, details & selection →CR Hydraulic Crushers
Process concrete with the WCR hydraulic-crusher range; match jaw geometry to the structure and work stage.
3 listed modelsView type, details & selection →CC Hydraulic Crushers
Process concrete using the WCC crusher configuration, with model-specific opening and hydraulic requirements.
3 listed modelsView type, details & selection →Rotating Pulverizers
Position the jaws around concrete and carry out secondary processing with the WRP rotating-pulverizer range.
3 listed modelsView type, details & selection →Pulverizers with Magnet
Combine concrete processing with a separately specified magnetic-recovery arrangement.
1 listed modelsView type, details & selection →Selector & Demolition Grabs
Sort, pick and position demolition material with a selector-grab jaw arrangement.
Specify your configurationView type, details & selection →